On Tue, 12 Apr 2005, Daniel Eriksson wrote: > > This is the third time in 4 days that I get the following crash on one of my > servers. It's a dual AthlonMP machine, and at the time of the crash it > wasn't doing much at all (running a few instances of a proprietary video > server app). There's a dmesg at the bottom too. > > The log below is from a system running CURRENT from earlier today > (2005.04.12.06.30.00). The other two crashes happened using sources dated > 2005.04.08.04.00.00. Can you get a crashdump and inspect the taskq with gdb? I'm assuming there's a bogus entry thats getting tripped over. > > /Daniel Eriksson > > Fatal trap 12: page fault while in kernel mode > cpuid = 0; apic id = 01 > fault virtual address = 0xc2b760b4 > fault code = supervisor write, page not present > instruction pointer = 0x8:0xc0578f53 > stack pointer = 0x10:0xe09e7ca4 > frame pointer = 0x10:0xe09e7ccc > code segment = base 0x0, limit 0xfffff, type 0x1b > = DPL 0, pres 1, def32 1, gran 1 > processor eflags = interrupt enabled, resume, IOPL = 0 > current process = 40 (swi6: task queue) > [thread pid 40 tid 100036 ] > Stopped at taskqueue_run+0x123: andl $-0x2,0x14(%ebx) > db> where > Tracing pid 40 tid 100036 td 0xc1eccd80 > taskqueue_run(c1f3c180,e09e7d14,c053a678,0,0) at taskqueue_run+0x123 > taskqueue_swi_run(0,0,0,0,0) at taskqueue_swi_run+0x13 > ithread_loop(c1ed9180,e09e7d48,0,0,0) at ithread_loop+0x1a8 > fork_exit(c053a4d0,c1ed9180,e09e7d48) at fork_exit+0x80 > fork_trampoline() at fork_trampoline+0x8 > --- trap 0x1, eip = 0, esp = 0xe09e7d7c, ebp = 0 --- > db> ps > pid proc uid ppid pgrp flag stat wmesg wchan cmd > 11120 c25bb7f0 0 612 11120 0004100 [CPU 1] mcvidserv > 10639 c28c09ec 0 612 10639 0004100 [SLPQ biord 0xd17c6b30][SLP] > mcvidserv > 10532 c3e9a1fc 0 612 10532 0004100 [SLPQ sbwait 0xc2456cb4][SLP] > mcvidserv > 7902 c250e5f4 0 612 7902 0004100 [SLPQ sbwait 0xc2284cb4][SLP] > mcvidserv > 1725 c2814be8 0 612 1725 0004100 [SLPQ nanslp 0xc07930ac][SLP] > mcvidserv > 3372 c28bd9ec 0 533 533 0000101 [SLPQ select 0xc0799c04][SLP] smbd > 860 c25b57f0 0 850 860 0004002 [SLPQ nanslp 0xc07930ac][SLP] mfk > 850 c2814de4 0 849 850 0004002 [SLPQ pause 0xc2814e18][SLP] csh > 849 c25b59ec 0 1 849 0000000 [SLPQ select 0xc0799c04][SLP] screen > 771 c28c03f8 1001 1 771 0000002 [SLPQ select 0xc0799c04][SLP] ctrail > 720 c28145f4 0 1 720 0000000 [SLPQ ggwait 0xc27b6000][SLP] ggatec > 714 c212b1fc 0 1 714 0000000 [SLPQ ggwait 0xc27ac000][SLP] ggatec > 705 c218c9ec 0 1 705 0000000 [SLPQ ggwait 0xc27b5000][SLP] ggatec > 696 c25bb000 0 1 696 0000000 [SLPQ ggwait 0xc2773000][SLP] ggatec > 685 c25b53f8 0 1 685 0000000 [SLPQ ggwait 0xc215c000][SLP] ggatec > 678 c25b5de4 0 1 678 0000000 [SLPQ ggwait 0xc2506000][SLP] ggatec > 635 c25b5be8 0 0 0 0000204 [SLPQ - 0xc1f47000][SLP] g_bde > da0s1g.bde > 627 c250e9ec 0 0 0 0000204 [SLPQ - 0xc218e000][SLP] gv_v 480GB > 626 c25bb1fc 0 0 0 0000204 [SLPQ - 0xc1f88a00][SLP] gv_p > 480GB.p0 > 625 c25bb3f8 0 0 0 0000204 [SLPQ - 0xc25b9c00][SLP] gv_d vd2 > 624 c25bb5f4 0 0 0 0000204 [SLPQ - 0xc218ee00][SLP] gv_d vd3 > 623 c250f3f8 0 0 0 0000204 [SLPQ - 0xc21bab00][SLP] gv_d vd0 > 622 c250e7f0 0 0 0 0000204 [SLPQ - 0xc2513600][SLP] gv_d vd1 > 621 c212ade4 0 1 621 0004002 [SLPQ ttyin 0xc1fcfc10][SLP] getty > 620 c218c3f8 0 1 620 0004002 [SLPQ ttyin 0xc1fd7410][SLP] getty > 619 c212abe8 0 1 619 0004002 [SLPQ ttyin 0xc1fa3c10][SLP] getty > 618 c250f1fc 0 1 618 0004002 [SLPQ ttyin 0xc1fd7010][SLP] getty > 617 c212a9ec 0 1 617 0004002 [SLPQ ttyin 0xc1fd6810][SLP] getty > 612 c218c7f0 0 1 612 0000000 [SLPQ select 0xc0799c04][SLP] inetd > 572 c250e1fc 0 1 571 0000000 [SLPQ select 0xc0799c04][SLP] snmpd > 564 c250ebe8 0 1 563 0000000 [SLPQ nanslp 0xc07930ac][SLP] smartd > 560 c21899ec 0 559 560 0004002 [SLPQ ttyin 0xc20f0010][SLP] csh > 559 c250f000 1001 546 559 0004102 [SLPQ wait 0xc250f000][SLP] su > 546 c2189de4 1001 545 546 0004002 [SLPQ pause 0xc2189e18][SLP] csh > 545 c212b9ec 1001 542 542 0000100 [SLPQ select 0xc0799c04][SLP] sshd > 542 c1fdbde4 0 470 542 0004100 [SLPQ sbwait 0xc2490718][SLP] sshd > 541 c212b3f8 0 533 533 0000101 [SLPQ pause 0xc212b42c][SLP] smbd > 533 c21893f8 0 1 533 0000101 [SLPQ select 0xc0799c04][SLP] smbd > 529 c21891fc 0 1 529 0000001 [SLPQ select 0xc0799c04][SLP] nmbd > 509 c21897f0 65534 1 509 0000100 [SLPQ select 0xc0799c04][SLP] > identd > 496 c218c1fc 0 1 496 0000000 [SLPQ nanslp 0xc07930ac][SLP] cron > 480 c212bde4 25 1 480 0000100 [SLPQ pause 0xc212be18][SLP] > sendmail > 476 c212a1fc 0 1 476 0000100 [SLPQ select 0xc0799c04][SLP] > sendmail > 470 c212a5f4 0 1 470 0000100 [SLPQ select 0xc0799c04][SLP] sshd > 451 c21895f4 0 1 451 0000000 [SLPQ select 0xc0799c04][SLP] ntpd > 344 c218c000 0 1 344 0000000 [SLPQ select 0xc0799c04][SLP] > syslogd > 315 c212a7f0 0 1 315 0000000 [SLPQ select 0xc0799c04][SLP] devd > 171 c212a3f8 0 1 171 0000000 [SLPQ pause 0xc212a42c][SLP] > adjkerntz > 56 c212b7f0 0 0 0 0000204 [SLPQ - 0xe46a4d0c][SLP] schedcpu > 55 c1ecd3f8 0 0 0 0000204 [SLPQ - 0xc079d52c][SLP] nfsiod 3 > 54 c1ecd5f4 0 0 0 0000204 [SLPQ - 0xc079d528][SLP] nfsiod 2 > 53 c1ecd7f0 0 0 0 0000204 [SLPQ - 0xc079d524][SLP] nfsiod 1 > 52 c1ecd9ec 0 0 0 0000204 [SLPQ - 0xc079d520][SLP] nfsiod 0 > 51 c1ecdbe8 0 0 0 0000204 [SLPQ vlruwt 0xc1ecdbe8][SLP] vnlru > 50 c1ecdde4 0 0 0 0000204 [SLPQ syncer 0xc0792e0c][SLP] syncer > 49 c1fdb000 0 0 0 0000204 [SLPQ psleep 0xc079a170][SLP] > bufdaemon > 48 c1fdb1fc 0 0 0 0000204 [SLPQ pollid 0xc0792464][SLP] > idlepoll > 47 c1fdb3f8 0 0 0 000020c [SLPQ pgzero 0xc07a3c24][SLP] > pagezero > 46 c1fdb5f4 0 0 0 0000204 [SLPQ psleep 0xc07a3774][SLP] > vmdaemon > 45 c1fdb7f0 0 0 0 0000204 [SLPQ psleep 0xc07a3730][SLP] > pagedaemon > 9 c1fdb9ec 0 0 0 0000204 [SLPQ - 0xc1fb843c][SLP] fdc0 > 44 c1fdbbe8 0 0 0 0000204 [IWAIT] swi0: sio > 8 c1ec0be8 0 0 0 0000204 [SLPQ idle 0xc1f6dc74][SLP] > ciss_notify0 > 7 c1ec0de4 0 0 0 0000204 [SLPQ actask 0xc08a0f2c][SLP] > acpi_task0 > 43 c1ecb000 0 0 0 0000204 [IWAIT] swi5:+ > 42 c1ecb1fc 0 0 0 0000204 [IWAIT] swi6: acpitaskq > 6 c1ecb3f8 0 0 0 0000204 [SLPQ - 0xc1f3c080][SLP] thread > taskq > 41 c1ecb5f4 0 0 0 0000204 [IWAIT] swi6:+ > 40 c1ecb7f0 0 0 0 0000204 [CPU 0] swi6: task queue > 5 c1ecb9ec 0 0 0 0000204 [SLPQ - 0xc1f3c1c0][SLP] kqueue > taskq > 39 c1ecbbe8 0 0 0 0000204 [IWAIT] swi2: cambio > 38 c1ecbde4 0 0 0 0000204 [SLPQ - 0xc078bdc0][SLP] yarrow > 4 c1ecd000 0 0 0 0000204 [SLPQ - 0xc0790228][SLP] g_down > 3 c1ecd1fc 0 0 0 0000204 [SLPQ - 0xc0790224][SLP] g_up > 2 c1eb05f4 0 0 0 0000204 [SLPQ - 0xc079021c][SLP] g_event > 37 c1eb07f0 0 0 0 0000204 [RUNQ] swi1: net > 36 c1eb09ec 0 0 0 0000204 [IWAIT] swi3: vm > 35 c1eb0be8 0 0 0 000020c [RUNQ] swi4: clock sio > 34 c1eb0de4 0 0 0 0000204 [IWAIT] irq23: > 33 c1ec0000 0 0 0 0000204 [IWAIT] irq22: em1 > 32 c1ec01fc 0 0 0 0000204 [IWAIT] irq21: em0 > 31 c1ec03f8 0 0 0 0000204 [IWAIT] irq20: ciss0 > 30 c1ec05f4 0 0 0 0000204 [IWAIT] irq19: atapci3+ > 29 c1ec07f0 0 0 0 0000204 [IWAIT] irq18: > 28 c1ec09ec 0 0 0 0000204 [LOCK taskqueue c1e01140] irq17: > atapci1+ > 27 c1e0b1fc 0 0 0 0000204 [IWAIT] irq16: > 26 c1e0b3f8 0 0 0 0000204 [IWAIT] irq15: ata1 > 25 c1e0b5f4 0 0 0 0000204 [IWAIT] irq14: ata0 > 24 c1e0b7f0 0 0 0 0000204 [IWAIT] irq13: > 23 c1e0b9ec 0 0 0 0000204 [IWAIT] irq12: > 22 c1e0bbe8 0 0 0 0000204 [IWAIT] irq11: > 21 c1e0bde4 0 0 0 0000204 [IWAIT] irq10: > 20 c1eb0000 0 0 0 0000204 [IWAIT] irq9: acpi0 > 19 c1eb01fc 0 0 0 0000204 [IWAIT] irq8: > 18 c1eb03f8 0 0 0 0000204 [IWAIT] irq7: > 17 c1e06000 0 0 0 0000204 [IWAIT] irq6: fdc0 > 16 c1e061fc 0 0 0 0000204 [IWAIT] irq5: > 15 c1e063f8 0 0 0 0000204 [IWAIT] irq4: sio0 > 14 c1e065f4 0 0 0 0000204 [IWAIT] irq3: > 13 c1e067f0 0 0 0 0000204 [IWAIT] irq0: > 12 c1e069ec 0 0 0 0000204 [IWAIT] irq1: atkbd0 > 11 c1e06be8 0 0 0 000020c [Can run] idle: cpu0 > 10 c1e06de4 0 0 0 000020c [Can run] idle: cpu1 > 1 c1e0b000 0 0 1 0004200 [SLPQ wait 0xc1e0b000][SLP] init > 0 c0790320 0 0 0 0000200 [SLPQ sched 0xc0790320][SLP] swapper > > > > And here's part of the dmesg: > /boot/kernel/kernel text=0x3528bc data=0x36388+0x33c38 > syms=[0x4+0x42940+0x4+0x537ec] > /boot/kernel/acpi.ko text=0x49fa0 data=0x2124+0x110c > syms=[0x4+0x7730+0x4+0x9ec3] > KDB: debugger backends: ddb > KDB: current backend: ddb > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 6.0-CURRENT #0: Tue Apr 12 10:23:40 CEST 2005 > daniel_at_xxx:/usr/obj/usr/src/sys/XXX > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: AMD Athlon(tm) MP 2600+ (2000.08-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0 > > Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,MMX,FXSR,SSE> > AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!> > real memory = 804782080 (767 MB) > avail memory = 778342400 (742 MB) > ACPI APIC Table: <PTLTD APIC > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 1 > cpu1 (AP): APIC ID: 0 > MADT: Forcing active-low polarity and level trigger for SCI > ioapic0 <Version 1.1> irqs 0-23 on motherboard > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <PTLTD RSDT> on motherboard > acpi0: Power Button (fixed) > acpi0: Sleep Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x8000-0x807f,0x8080-0x80ff > iomem 0xd8000-0xdbfff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <AMD 762 host to AGP bridge> port 0x1490-0x1493 mem > 0xec000000-0xedffffff,0xea100000-0xea100fff at device 0.0 on pci0 > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pci1: <display, VGA> at device 5.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <AMD 768 UDMA100 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 7.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > pci0: <bridge> at device 7.3 (no driver attached) > ciss0: <Compaq Smart Array 5300> port 0x1000-0x10ff mem > 0xe8100000-0xe813ffff,0xe8000000-0xe80fffff irq 20 at device 8.0 on pci0 > ciss0: [GIANT-LOCKED] > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port > 0x1400-0x143f mem 0xe81c0000-0xe81dffff,0xe8140000-0xe817ffff irq 21 at > device 9.0 on pci0 > em0: Ethernet address: 00:04:23:ac:20:8a > em0: Speed:N/A Duplex:N/A > em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port > 0x1440-0x147f mem 0xe81e0000-0xe81fffff,0xe8180000-0xe81bffff irq 22 at > device 9.1 on pci0 > em1: Ethernet address: 00:04:23:ac:20:8b > em1: Speed:N/A Duplex:N/A > pcib2: <ACPI PCI-PCI bridge> at device 16.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > atapci1: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port > 0x3010-0x3017,0x3004-0x3007,0x3008-0x300f,0x3000-0x3003,0x2000-0x20ff irq 17 > at device 5.0 on pci2 > ata2: <ATA channel 0> on atapci1 > ata3: <ATA channel 1> on atapci1 > atapci2: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port > 0x3028-0x302f,0x301c-0x301f,0x3020-0x3027,0x3018-0x301b,0x2400-0x24ff irq 17 > at device 5.1 on pci2 > ata4: <ATA channel 0> on atapci2 > ata5: <ATA channel 1> on atapci2 > atapci3: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port > 0x3040-0x3047,0x3034-0x3037,0x3038-0x303f,0x3030-0x3033,0x2800-0x28ff irq 19 > at device 7.0 on pci2 > ata6: <ATA channel 0> on atapci3 > ata7: <ATA channel 1> on atapci3 > atapci4: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port > 0x3058-0x305f,0x304c-0x304f,0x3050-0x3057,0x3048-0x304b,0x2c00-0x2cff irq 19 > at device 7.1 on pci2 > ata8: <ATA channel 0> on atapci4 > ata9: <ATA channel 1> on atapci4 > pci_link0: <ACPI PCI Link LNKA> irq 5 on acpi0 > pci_link1: <ACPI PCI Link LNKB> irq 3 on acpi0 > pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0 > pci_link3: <ACPI PCI Link LNKD> irq 10 on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 > sio0: type 16550A, console > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > fdc0: [FAST] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem > 0xc0000-0xcafff,0xcb000-0xcefff,0xe0000-0xe3fff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x100> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > Timecounters tick every 1.000 msec > ipfw2 initialized, divert loadable, rule-based forwarding disabled, default > to accept, logging unlimited > ad0: 117800MB <IC35L120AVV207 0 V24OA66A> at ata0-master UDMA100 > ad1: 117800MB <HDS722512VLAT20 V33OA60A> at ata0-slave UDMA100 > ad2: 117800MB <IC35L120AVV207 0 V24OA66A> at ata1-master UDMA100 > ad3: 117800MB <IC35L120AVV207 0 V24OA66A> at ata1-slave UDMA100 > ad4: 238475MB <WDC WD2500JB-00FUA0 15.05R15> at ata2-master UDMA100 > ad5: 238475MB <WDC WD2500JB-00FUA0 15.05R15> at ata2-slave UDMA100 > ad6: 239372MB <Maxtor 4A250J0 RAMB1TU0> at ata3-master UDMA133 > ad7: 239372MB <Maxtor 5A250J0 RAMB1TV0> at ata3-slave UDMA133 > ad8: 194481MB <Maxtor 6Y200P0 YAR41BW0> at ata4-master UDMA133 > ad9: 194481MB <Maxtor 6Y200P0 YAR41VW0> at ata4-slave UDMA133 > ad10: 239372MB <Maxtor 6Y250P0 YAR41BW0> at ata5-master UDMA133 > ad12: 114473MB <Seagate ST3120022A 3.06> at ata6-master UDMA100 > ad13: 114473MB <Seagate ST3120022A 3.06> at ata6-slave UDMA100 > ad14: 117246MB <Maxtor 6Y120L0 YAR41BW0> at ata7-master UDMA133 > ad15: 117246MB <Maxtor 6Y120L0 YAR41BW0> at ata7-slave UDMA133 > ad16: 114473MB <WDC WD1200JB-00DUA3 75.13B75> at ata8-master UDMA100 > ad17: 117800MB <IC35L120AVV207 1 V24OA66A> at ata8-slave UDMA100 > ad18: 194481MB <Maxtor 6Y200P0 YAR41BW0> at ata9-master UDMA133 > ad19: 239372MB <Maxtor 7Y250P0 YAR41BW0> at ata9-slave UDMA133 > da0 at ciss0 bus 0 target 0 lun 0 > da0: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-0 device > da0: 135.168MB/s transfers > da0: 105008MB (215056800 512 byte sectors: 255H 32S/T 26355C) > da1 at ciss0 bus 0 target 1 lun 0 > da1: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device > da1: 135.168MB/s transfers > da1: 486240MB (995821155 512 byte sectors: 255H 63S/T 61987C) > ATA PseudoRAID loaded > ar0: 476950MB <HighPoint v2 RocketRAID RAID0 array> status: READY > ar0: disk0 READY using ad4 at ata2-master > ar0: disk1 READY using ad5 at ata2-slave > ar1: 478744MB <HighPoint v2 RocketRAID RAID0 array> status: READY > ar1: disk0 READY using ad6 at ata3-master > ar1: disk1 READY using ad7 at ata3-slave > ar2: 583442MB <HighPoint v2 RocketRAID RAID0 array> status: READY > ar2: disk0 READY using ad8 at ata4-master > ar2: disk1 READY using ad9 at ata4-slave > ar2: disk2 READY using ad18 at ata9-master > ar3: 478744MB <HighPoint v2 RocketRAID RAID0 array> status: READY > ar3: disk0 READY using ad19 at ata9-slave > ar3: disk1 READY using ad10 at ata5-master > ar4: 343420MB <HighPoint v2 RocketRAID RAID0 array> status: READY > ar4: disk0 READY using ad12 at ata6-master > ar4: disk1 READY using ad13 at ata6-slave > ar4: disk2 READY using ad16 at ata8-master > ar5: 351740MB <HighPoint v2 RocketRAID RAID0 array> status: READY > ar5: disk0 READY using ad14 at ata7-master > ar5: disk1 READY using ad15 at ata7-slave > ar5: disk2 READY using ad17 at ata8-slave > SMP: AP CPU #1 Launched! > Trying to mount root from ufs:/dev/da0s1a > Pre-seeding PRNG: kickstart. > Loading configuration files. > kernel dumps on /dev/da0s1b > Entropy harvesting: point_to_point kickstart. > swapon: adding /dev/da0s1b as swap device > Starting file system checks: > /dev/da0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS > /dev/da0s1a: clean, 124444 free (1100 frags, 15418 blocks, 0.4% > fragmentation) > /dev/da0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS > /dev/da0s1e: clean, 253807 free (31 frags, 31722 blocks, 0.0% fragmentation) > /dev/da0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS > /dev/da0s1f: clean, 3082494 free (29310 frags, 381648 blocks, 0.6% > fragmentation) > /dev/da0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS > /dev/da0s1d: clean, 207823 free (975 frags, 25856 blocks, 0.4% > fragmentation) > /dev/da0s1h: FILE SYSTEM CLEAN; SKIPPING CHECKS > /dev/da0s1h: clean, 31567485 free (557 frags, 3945866 blocks, 0.0% > fragmentation) > Setting hostname: xxx. > net.inet.tcp.sendspace: 32768 -> 2097152 > net.inet.tcp.recvspace: 65536 -> 2097152 > kern.ipc.maxsockbuf: 262144 -> 16777216 > kern.ipc.somaxconn: 128 -> 256 > net.inet.ip.intr_queue_maxlen: 50 -> 128 > kern.polling.enable: 0 -> 1 > kern.polling.burst_max: 150 -> 300 > kern.polling.each_burst: 5 -> 50 > kern.polling.poll_in_trap: 0 -> 1 > kern.polling.user_frac: 50 -> 33 > vfs.hirunningspace: 1048576 -> 8388608 > ... > > > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" > -- Doug White | FreeBSD: The Power to Serve dwhite_at_gumbysoft.com | www.FreeBSD.orgReceived on Fri Apr 15 2005 - 14:55:50 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:32 UTC