Re: SMP on Compaq DL380

From: Matthew Sullivan <matthew_at_uq.edu.au>
Date: Tue, 26 Apr 2005 13:29:15 +1000
Doug White wrote:

>On Mon, 25 Apr 2005, Matthew Sullivan wrote:
>
>  
>
>>Nate Lawson wrote:
>>
>>    
>>
>>>I'd like to see the acpidump -t -d > matthew.asl
>>>      
>>>
>>http://scorpion.sorbs.net/matthew.asl
>>
>>    
>>
>>>There definitely is a problem when you have identical APIC ids.  We
>>>already blacklist one version of this BIOS.
>>>
>>>      
>>>
>>That's not something I wanted to here right now... :-(
>>    
>>
>
>Are you __sure__ you're booting the right kernel?
>http://scorpion.sorbs.net/dmesg.txt shows a kernel that does not have SMP
>nor APIC enabled.  I'm still seeing ISA interrupt routing rather than APIC
>mappings.  And as noted previously the APIC IDs are not set which means
>they are not enabled.  (APIC IDs are always >0.)
>
>What is the output of 'sysctl kern.smp'?
>  
>
kern.smp.maxcpus: 16
kern.smp.active: 0
kern.smp.disabled: 0
kern.smp.cpus: 1
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1

>Have you tried booting without ACPI?
>  
>
No, but I am doing now...

Btw now I have remote console this is what the BIOS shows....

   1024 MB Detected                           

COMPAQ System BIOS - P17 (12/18/2002)
Copyright 1982,2002 Compaq Computer Corporation. All rights reserved.


Processor 1 initialized at 866/133 MHz with 256 Kbyte Cache
Processor 2 initialized at 866/133 MHz with 256 Kbyte Cache
   1024 MB Detected                           

COMPAQ System BIOS - P17 (12/18/2002)
Copyright 1982,2002 Compaq Computer Corporation. All rights reserved.


Processor 1 initialized at 866/133 MHz with 256 Kbyte Cache
Processor 2 initialized at 866/133 MHz with 256 Kbyte Cache

etc...

Boot without ACPI is show at http://scorpion.sorbs.net/dmesg-noacpi.txt

kern.smp.maxcpus: 16
kern.smp.active: 0
kern.smp.disabled: 0
kern.smp.cpus: 1
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1

I'm going to recompile the kernel again - with the current config - just 
to prove it's there...

Regards,

-- 
Matthew Sullivan
Specialist Systems Programmer
Information Technology Services
The University of Queensland


Received on Tue Apr 26 2005 - 01:30:30 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:33 UTC