Posted on Tue, 09 Aug 2005 08:50:07 +1000 by author Sam Lawrance <boris_at_brooknet.com.au> > ahd0: Invalid Sequencer interrupt occurred. > >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< I had same issue on 5.4-RELEASE, Tyan S2881UG2NR (AIC-7902) with MaxTronic Sivy disk array. For my case, while installation, degrading SCSI speed (*) from 320MB/s to 80MB/s was only solution other than swapping the card to mpt or something. After installation, it could boot at 160MB/s too. Other OSs, such as RHEL 64bit or Windows XP 64bit ran fine so I guess it should be the problem within ahd. * Limit of negotiable speed, can be set in SCSI BIOS. -- UEMURA (fka. MAENAKA) Tetsuya <maenaka_at_pluto.dti.ne.jp>Received on Mon Aug 08 2005 - 22:21:51 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:40 UTC