On 8/11/05, Jeremie Le Hen <jeremie_at_le-hen.org> wrote: > Hi, > > you should Cc: Søren Schmidt <sos at FreeBSD dot org> in case he misses > your mail. I think he's the guy who can correct the problem. Scott > Long may too. Thanks for the advice. Done and done. :) > > Regards, > > Jeremie > > On Wed, Aug 10, 2005 at 07:38:30PM -0400, Alexander Chamandy wrote: > > On 8/10/05, Alexander Chamandy <bsdfreak_at_gmail.com> wrote: > > > I'm seeing messages like this on bootup: ata2: FAILURE - oversized DMA > > > transfer attempt 8704 > 7680 > > > > > > I know FreeBSD has some issues with the SiI SATA controllers so I'm > > > not sure if this is already known, but essentially under high load the > > > machine either hardlocks or simply reboots. I've tried custom and > > > generic kernels as well as reinstalling to no avail. This system, > > > like the subject says, is running FreeBSD/amd64 6.0-BETA2. Should I > > > disable DMA? Is there a workaround? Dmesg from GENERIC kernel is as > > > follows: > > > > > > Copyright (c) 1992-2005 The FreeBSD Project. > > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > > The Regents of the University of California. All rights reserved. > > > FreeBSD 6.0-BETA2 #0: Tue Aug 2 22:37:52 UTC 2005 > > > root_at_portnoy.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > > > WARNING: WITNESS option enabled, expect reduced performance. > > > Timecounter "i8254" frequency 1193182 Hz quality 0 > > > CPU: AMD Athlon(tm) 64 Processor 3200+ (2080.20-MHz K8-class CPU) > > > Origin = "AuthenticAMD" Id = 0xf48 Stepping = 8 > > > Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> > > > AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow> > > > real memory = 2147418112 (2047 MB) > > > avail memory = 2062671872 (1967 MB) > > > ACPI APIC Table: <Nvidia AWRDACPI> > > > ioapic0 <Version 1.1> irqs 0-23 on motherboard > > > acpi0: <Nvidia AWRDACPI> on motherboard > > > acpi0: Power Button (fixed) > > > pci_link0: <ACPI PCI Link LNK1> irq 3 on acpi0 > > > pci_link1: <ACPI PCI Link LNK2> irq 10 on acpi0 > > > pci_link2: <ACPI PCI Link LNK3> irq 11 on acpi0 > > > pci_link3: <ACPI PCI Link LNK4> on acpi0 > > > pci_link4: <ACPI PCI Link LNK5> irq 7 on acpi0 > > > pci_link5: <ACPI PCI Link LUBA> irq 4 on acpi0 > > > pci_link6: <ACPI PCI Link LUBB> irq 4 on acpi0 > > > pci_link7: <ACPI PCI Link LMAC> irq 5 on acpi0 > > > pci_link8: <ACPI PCI Link LAPU> on acpi0 > > > pci_link9: <ACPI PCI Link LACI> on acpi0 > > > pci_link10: <ACPI PCI Link LMCI> on acpi0 > > > pci_link11: <ACPI PCI Link LSMB> irq 5 on acpi0 > > > pci_link12: <ACPI PCI Link LUB2> irq 4 on acpi0 > > > pci_link13: <ACPI PCI Link LFIR> on acpi0 > > > pci_link14: <ACPI PCI Link L3CM> on acpi0 > > > pci_link15: <ACPI PCI Link LIDE> on acpi0 > > > pci_link16: <ACPI PCI Link LSID> on acpi0 > > > pci_link17: <ACPI PCI Link APC1> irq 16 on acpi0 > > > pci_link18: <ACPI PCI Link APC2> irq 17 on acpi0 > > > pci_link19: <ACPI PCI Link APC3> irq 18 on acpi0 > > > pci_link20: <ACPI PCI Link APC4> irq 19 on acpi0 > > > pci_link21: <ACPI PCI Link APC5> irq 16 on acpi0 > > > pci_link22: <ACPI PCI Link APCF> irq 0 on acpi0 > > > pci_link23: <ACPI PCI Link APCG> irq 0 on acpi0 > > > pci_link24: <ACPI PCI Link APCH> irq 0 on acpi0 > > > pci_link25: <ACPI PCI Link APCI> irq 0 on acpi0 > > > pci_link26: <ACPI PCI Link APCJ> irq 0 on acpi0 > > > pci_link27: <ACPI PCI Link APCK> irq 0 on acpi0 > > > pci_link28: <ACPI PCI Link APCS> irq 23 on acpi0 > > > pci_link29: <ACPI PCI Link APCL> irq 0 on acpi0 > > > pci_link30: <ACPI PCI Link APCM> irq 0 on acpi0 > > > pci_link31: <ACPI PCI Link AP3C> irq 0 on acpi0 > > > pci_link32: <ACPI PCI Link APCZ> irq 0 on acpi0 > > > pci_link33: <ACPI PCI Link APSI> irq 0 on acpi0 > > > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > > > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > > > cpu0: <ACPI CPU> on acpi0 > > > acpi_button0: <Power Button> on acpi0 > > > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0xcf0-0xcf3 on acpi0 > > > pci0: <ACPI PCI bus> on pcib0 > > > pci_link22: Unable to choose an IRQ > > > pci_link23: Unable to choose an IRQ > > > pci_link29: Unable to choose an IRQ > > > pci_link24: Unable to choose an IRQ > > > agp0: <NVIDIA nForce3 AGP Controller> mem 0xe0000000-0xe7ffffff at > > > device 0.0 on pci0 > > > isab0: <PCI-ISA bridge> at device 1.0 on pci0 > > > isa0: <ISA bus> on isab0 > > > pci0: <serial bus, SMBus> at device 1.1 (no driver attached) > > > ohci0: <nVidia nForce3 USB Controller> mem 0xfc002000-0xfc002fff irq > > > 20 at device 2.0 on pci0 > > > ohci0: [GIANT-LOCKED] > > > usb0: OHCI version 1.0, legacy support > > > usb0: SMM does not respond, resetting > > > usb0: <nVidia nForce3 USB Controller> on ohci0 > > > usb0: USB revision 1.0 > > > uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > > uhub0: 3 ports with 3 removable, self powered > > > ohci1: <nVidia nForce3 USB Controller> mem 0xfc003000-0xfc003fff irq > > > 21 at device 2.1 on pci0 > > > ohci1: [GIANT-LOCKED] > > > usb1: OHCI version 1.0, legacy support > > > usb1: SMM does not respond, resetting > > > usb1: <nVidia nForce3 USB Controller> on ohci1 > > > usb1: USB revision 1.0 > > > uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > > uhub1: 3 ports with 3 removable, self powered > > > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfc004000-0xfc0040ff > > > irq 22 at device 2.2 on pci0 > > > ehci0: [GIANT-LOCKED] > > > usb2: EHCI version 1.0 > > > usb2: companion controllers, 4 ports each: usb0 usb1 > > > usb2: <EHCI (generic) USB 2.0 controller> on ehci0 > > > usb2: USB revision 2.0 > > > uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > > > uhub2: 6 ports with 6 removable, self powered > > > uhub3: vendor 0x0543 product 0x1167, class 9/0, rev 2.00/ff.ff, addr 2 > > > uhub3: multiple transaction translators > > > uhub3: 4 ports with 4 removable, self powered > > > ulpt0: HewLett Packard HP LaserJet 1200, rev 1.10/1.00, addr 3, iclass 7/1 > > > ulpt0: using bi-directional mode > > > nve0: <NVIDIA nForce MCP3 Networking Adapter> port 0xd000-0xd007 mem > > > 0xfc000000-0xfc000fff irq 20 at device 5.0 on pci0 > > > nve0: Ethernet address 00:0d:61:14:6f:39 > > > miibus0: <MII bus> on nve0 > > > rlphy0: <RTL8201L 10/100 media interface> on miibus0 > > > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > > nve0: Ethernet address: 00:0d:61:14:6f:39 > > > nve0: [GIANT-LOCKED] > > > atapci0: <nVidia nForce3 UDMA133 controller> port > > > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 8.0 on > > > pci0 > > > ata0: <ATA channel 0> on atapci0 > > > ata1: <ATA channel 1> on atapci0 > > > pcib1: <ACPI PCI-PCI bridge> at device 10.0 on pci0 > > > pci1: <ACPI PCI bus> on pcib1 > > > pci1: <multimedia, audio> at device 8.0 (no driver attached) > > > pci1: <input device> at device 8.1 (no driver attached) > > > fwohci0: <1394 Open Host Controller Interface> mem > > > 0xfb005000-0xfb0057ff,0xfb000000-0xfb003fff irq 17 at device 8.2 on > > > pci1 > > > fwohci0: OHCI version 1.10 (ROM=0) > > > fwohci0: No. of Isochronous channels is 4. > > > fwohci0: EUI64 00:02:3c:00:21:04:e6:cc > > > fwohci0: Phy 1394a available S400, 2 ports. > > > fwohci0: Link S400, max_rec 2048 bytes. > > > firewire0: <IEEE1394(FireWire) bus> on fwohci0 > > > fwe0: <Ethernet over FireWire> on firewire0 > > > if_fwe0: Fake Ethernet address: 02:02:3c:04:e6:cc > > > fwe0: Ethernet address: 02:02:3c:04:e6:cc > > > fwe0: if_start running deferred for Giant > > > sbp0: <SBP-2/SCSI over FireWire> on firewire0 > > > fwohci0: Initiate bus reset > > > fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode > > > firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) > > > firewire0: bus manager 0 (me) > > > ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xa800-0xa8ff mem > > > 0xfb004000-0xfb004fff irq 18 at device 10.0 on pci1 > > > ahc0: [GIANT-LOCKED] > > > aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs > > > atapci1: <SiI 3512 SATA150 controller> port > > > 0xac00-0xac07,0xb000-0xb003,0xb400-0xb407,0xb800-0xb803,0xbc00-0xbc0f > > > mem 0xfb006000-0xfb0061ff irq 17 at device 13.0 on pci1 > > > ata2: <ATA channel 0> on atapci1 > > > ata3: <ATA channel 1> on atapci1 > > > pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 > > > pci2: <ACPI PCI bus> on pcib2 > > > pci2: <display, VGA> at device 0.0 (no driver attached) > > > pci2: <display> at device 0.1 (no driver attached) > > > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > > > fdc0: [FAST] > > > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > > > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > > > kbd0 at atkbd0 > > > atkbd0: [GIANT-LOCKED] > > > orm0: <ISA Option ROMs> at iomem > > > 0xc0000-0xccfff,0xd0000-0xd7fff,0xd8000-0xdc7ff,0xdd000-0xe27ff on > > > isa0 > > > ppc0: cannot reserve I/O port range > > > sc0: <System console> at flags 0x100 on isa0 > > > sc0: VGA <16 virtual consoles, flags=0x300> > > > sio0: configured irq 4 not in bitmap of probed irqs 0 > > > sio0: port may not be enabled > > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > > > sio0: type 8250 or not responding > > > sio1: configured irq 3 not in bitmap of probed irqs 0 > > > sio1: port may not be enabled > > > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > > > ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/22.00, addr 2, iclass 3/1 > > > ums0: 7 buttons and Z dir. > > > Timecounter "TSC" frequency 2080199228 Hz quality 800 > > > Timecounters tick every 1.000 msec > > > Waiting 5 seconds for SCSI devices to settle > > > acd0: DVDR <TEAC DV-W516GA/C4S2> at ata1-slave UDMA33 > > > ad4: 286188MB <Maxtor 6B300S0 BANC1B10> at ata2-master SATA150 > > > ata2: FAILURE - oversized DMA transfer attempt 8704 > 7680 > > > ad4: setting up DMA failed > > > da0 at ahc0 bus 0 target 0 lun 0 > > > da0: <SEAGATE ST118273LW 6246> Fixed Direct Access SCSI-2 device > > > da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit) > > > da0: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) > > > ATA PseudoRAID loaded > > > Trying to mount root from ufs:/dev/ad4s2a > > > WARNING: / was not properly dismounted > > > pcm0: <Creative Audigy (EMU10K2)> port 0xa000-0xa01f irq 16 at device > > > 8.0 on pci1 > > > pcm0: <TriTech TR28602 AC97 Codec> > > > nve0: link state changed to DOWN > > > nve0: link state changed to UP > > > nve0: promiscuous mode enabled > > > nve0: promiscuous mode disabled > > > > > > > > > > > > > > > > > > > > > -- > > > Best wishes, > > > > > > Alexander G. Chamandy > > > Webmaster > > > www.bsdfreak.org > > > Your Source For BSD News! > > > Hosted by Envescent, LLC > > > www.envescent.com > > > > > > > I disabled DMA by adding hw.ata.ata_dma=0 to /boot/loader.conf and now > > the lockups have stopped. This isn't the ideal solution, but perhaps > > it narrows down the problem a bit more. > > -- > Jeremie Le Hen > < jeremie at le-hen dot org >< ttz at chchile dot org > > -- Best wishes, Alexander G. Chamandy Webmaster www.bsdfreak.org Your Source For BSD News! Hosted by Envescent, LLC www.envescent.comReceived on Thu Aug 11 2005 - 02:38:02 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:41 UTC