Can support Intel's E8500 chipset on freebsd???

From: wsk <wsk_at_gddsn.org.cn>
Date: Thu, 15 Dec 2005 17:44:22 +0800
lists:
with DELL PE6850, It seems 6.0 Can't support the
Intel's E8500 XMB chipset
pciconf -lv:
none0_at_pci0:9:0: class=0x050000 card=0x01701028 chip=0x26208086 rev=0x00
hdr=0x00
vendor = 'Intel Corporation'
device = 'E8500 XMB A/B/C/D Identification Registers'
class = memory
subclass = RAM
none1_at_pci0:9:1: class=0x050000 card=0x01701028 chip=0x26218086 rev=0x00
hdr=0x00
vendor = 'Intel Corporation'
device = 'E8500 XMB A/B/C/D Miscellaneous Registers'
class = memory
subclass = RAM
none2_at_pci0:9:2: class=0x050000 card=0x01701028 chip=0x26228086 rev=0x00
hdr=0x00
vendor = 'Intel Corporation'
device = 'E8500 XMB A/B/C/D Memory Interleaving Registers'
class = memory
subclass = RAM
dmesg:
%dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Fri Dec 16 00:54:34 CST 2005
wsk_at_wfdb2.gddsn.org.cn:/usr/obj/usr/src/sys/WFDB2
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) MP CPU 3.00GHz (2995.52-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x659d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,CNTX-ID,CX16,<b14>>
AMD Features=0x20100800<SYSCALL,NX,LM>
real memory = 9395240960 (8960 MB)
avail memory = 8288649216 (7904 MB)
ACPI APIC Table: <DELL PE68x0 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 6
cpu2 (AP): APIC ID: 8
cpu3 (AP): APIC ID: 14
ioapic1: Changing APIC ID to 1
ioapic1: WARNING: intbase 32 != expected base 24
ioapic2: Changing APIC ID to 2
ioapic2: WARNING: intbase 64 != expected base 56
ioapic3: Changing APIC ID to 3
ioapic3: WARNING: intbase 96 != expected base 88
ioapic4: Changing APIC ID to 4
ioapic4: WARNING: intbase 128 != expected base 120
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
ioapic2 <Version 2.0> irqs 64-87 on motherboard
ioapic3 <Version 2.0> irqs 96-119 on motherboard
ioapic4 <Version 2.0> irqs 128-151 on motherboard
acpi0: <DELL PE68x0> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 10 on acpi0
pci_link4: <ACPI PCI Link LNKE> on acpi0
pci_link5: <ACPI PCI Link LNKF> on acpi0
pci_link6: <ACPI PCI Link LNKG> on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 3 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci7: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci8: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci11: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci14: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> mem 0xdf6ff000-0xdf6fffff at device 0.0 on
pci14
pci15: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 0.2 on pci14
pci18: <ACPI PCI bus> on pcib8
bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem
0xdf8f0000-0xdf8fffff irq 64 at device 2.0 on pci18
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:12:3f:ff:81:47
bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem
0xdf8e0000-0xdf8effff irq 65 at device 2.1 on pci18
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge1: Ethernet address: 00:12:3f:ff:81:48
pcib9: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci19: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 0.0 on pci19
pci20: <ACPI PCI bus> on pcib10
amr0: <LSILogic MegaRAID 1.51> mem
0xdd0f0000-0xdd0fffff,0xdf4c0000-0xdf4fffff irq 110 at device 14.0 on pci20
amr0: <LSILogic PERC 4e/Di> Firmware 521S, BIOS H430, 256MB RAM
pcib11: <ACPI PCI-PCI bridge> at device 0.2 on pci19
pci21: <ACPI PCI bus> on pcib11
pci0: <memory, RAM> at device 9.0 (no driver attached)
pci0: <memory, RAM> at device 9.1 (no driver attached)
pci0: <memory, RAM> at device 9.2 (no driver attached)
pci0: <memory, RAM> at device 9.3 (no driver attached)
pci0: <memory, RAM> at device 9.4 (no driver attached)
pci0: <memory, RAM> at device 9.5 (no driver attached)
pci0: <memory, RAM> at device 9.6 (no driver attached)
pci0: <memory, RAM> at device 9.7 (no driver attached)
pci0: <memory, RAM> at device 11.0 (no driver attached)
pci0: <memory, RAM> at device 11.1 (no driver attached)
pci0: <memory, RAM> at device 11.2 (no driver attached)
pci0: <memory, RAM> at device 11.3 (no driver attached)
pci0: <memory, RAM> at device 11.4 (no driver attached)
pci0: <memory, RAM> at device 11.5 (no driver attached)
pci0: <memory, RAM> at device 11.6 (no driver attached)
pci0: <memory, RAM> at device 11.7 (no driver attached)
pci0: <memory, RAM> at device 13.0 (no driver attached)
pci0: <memory, RAM> at device 13.1 (no driver attached)
pci0: <memory, RAM> at device 13.2 (no driver attached)
pci0: <memory, RAM> at device 13.3 (no driver attached)
pci0: <memory, RAM> at device 13.4 (no driver attached)
pci0: <memory, RAM> at device 13.5 (no driver attached)
pci0: <memory, RAM> at device 13.6 (no driver attached)
pci0: <memory, RAM> at device 13.7 (no driver attached)
pci0: <memory, RAM> at device 15.0 (no driver attached)
pci0: <memory, RAM> at device 15.1 (no driver attached)
pci0: <memory, RAM> at device 15.2 (no driver attached)
pci0: <memory, RAM> at device 15.3 (no driver attached)
pci0: <memory, RAM> at device 15.4 (no driver attached)
pci0: <memory, RAM> at device 15.5 (no driver attached)
pci0: <memory, RAM> at device 15.6 (no driver attached)
pci0: <memory, RAM> at device 15.7 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x6ce0-0x6cff
irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x6cc0-0x6cdf
irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x6ca0-0x6cbf
irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdff00000-0xdff003ff irq
23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2
uhub4: multiple transaction translators
uhub4: 2 ports with 2 removable, self powered
pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci22: <ACPI PCI bus> on pcib12
pci22: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc9fff,0xca000-0xcafff,0xcb000-0xcc7ff,0xec000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: vendor 0x413c product 0x3010, rev 2.00/2.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ukbd0: Dell Dell USB Keyboard, rev 1.10/2.00, addr 3, iclass 3/1
kbd0 at ukbd0
Timecounters tick every 1.000 msec
acd0: DVDROM <HL-DT-ST DVD-ROM GDR-8084N/1.01> at ata0-master UDMA33
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 1144320MB (2343567360 sectors) RAID 5 (optimal)
ses0 at amr0 bus 0 target 6 lun 0
ses0: <PE/PV 1x5 SCSI BP 1.0> Fixed Processor SCSI-2 device
ses0: SAF-TE Compliant Device
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Trying to mount root from ufs:/dev/amrd0s1a
bge0: link state changed to UP

any ideas?? TIA
Received on Thu Dec 15 2005 - 08:44:25 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:49 UTC