Re: 6.0-CURRENT SNAP004 hangs on amr

At 02:18 PM 02/07/2005, Martin Nilsson wrote:
>Joao Barros wrote:
>>I was trying to install 6.0-CURRENT SNAP004 i386 from CD and the
>>kernel hangs on amr.
>>I tried setting hint.acpi.0.disabled=1 with no change.
>>Removing the card the kernel boots right and I get to see sysinstall.
>>FreeBSD 5.4 installs and runs fine.
>
>I have the same problem with a MegaRAID Elite 1600 card, the problem is 
>with interrupt routing in CURRENT. I have tested my card in both a P3 and 
>a P4/Xeon with the same result. There is a PCI-PCI bridge on these cards, 
>I think that it is the cause of this problem as the 320-1 works as it should.


I think I too am seeing this on a 4way PIII

[hippo]# grep -i ^amr /var/run/dmesg.boot
amr0: <LSILogic MegaRAID 1.51> mem 0xf0000000-0xf7ffffff irq 16 at device 
0.0 on pci4
amr0: <LSILogic PERC 3/DC> Firmware 161J, BIOS 3.17, 128MB RAM
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 34556MB (70770688 sectors) RAID 5 (optimal)
[hippo]#

Is there a work around ?

         ---Mike