John, P.S. Here's the verbose dmesg with acpi on in the bios, but with the mss_probe routine (non pnp) using the method described in the architecture manual. Here you will see the acpi calls rejected by the mss_probe routine, and the pnpbios call accepted. The driver loads properly as pcm0 with acpi enabled. (now, the line in and mic in functions are completely broken for the CS4236B in mode 2 and were previously, so there is still a problem there.) Harry Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RELEASE #21: Sun May 29 15:06:21 CDT 2005 root_at_server1.quietfountain.com:/usr/obj/usr/src/sys/DISKLESS Preloaded elf kernel "/boot/kernel/kernel" at 0xc07af000. Preloaded elf module "/boot/kernel/snd_mss.ko" at 0xc07af1a4. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07af250. Calibrating clock(s) ... i8254 clock: 1193160 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 331109194 Hz CPU: Pentium II/Pentium II Xeon/Celeron (331.11-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x650 Stepping = 0 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 134209536 (127 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000825000 - 0x0000000007d8dfff, 123113472 bytes (30057 pages) avail memory = 125865984 (120 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xcf4e pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 Other BIOS signatures found: mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> io: <I/O> random: <entropy source, Software, Yarrow> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL GXa > on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80000064 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71808086) pcibios: BIOS version 2.10 Found $PIR table, 8 entries at 0xc00fcaf0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 7 A 0x64 14 embedded 0 7 B 0x65 15 embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 17 A 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 14 A 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 14 B 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 14 C 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 14 D 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 2 0 13 A 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 2 0 13 B 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 2 0 13 C 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 2 0 13 D 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 3 2 9 A 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 3 2 9 B 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 3 2 9 C 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 3 2 9 D 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 4 2 10 A 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 4 2 10 B 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 4 2 10 C 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 4 2 10 D 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 5 2 11 A 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 5 2 11 B 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 5 2 11 C 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 5 2 11 D 0x61 3 4 5 6 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi0: Power Button (fixed) atpic: Programming IRQ9 as level/low mss_probe: bus acpi0 is probing device pcm0 pnpmss_probe: bus acpi0 is probing device pcm0 lid 10cd041h, vid ffffffffh pnpmss_probe result 6 mss_probe: bus acpi0 is probing device pcm0 pnpmss_probe: bus acpi0 is probing device pcm0 lid 10cd041h, vid ffffffffh pnpmss_probe result 6 ACPI timer: 0/4 0/16777211 0/16777211 0/4 0/4 0/4 0/4 0/4 0/16777212 0/4 -> 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 mss_probe: bus acpi0 is probing device pcm0 pnpmss_probe: bus acpi0 is probing device pcm0 lid 0h, vid ffffffffh pnpmss_probe result 6 cpu0: <ACPI CPU> on acpi0 mss_probe: bus acpi0 is probing device pcm0 pnpmss_probe: bus acpi0 is probing device pcm0 lid 30ad041h, vid ffffffffh pnpmss_probe result 6 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 15] 0+ low,level,sharable 0.1.0 \\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 15] 0+ low,level,sharable 0.1.1 \\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 15] 10+ low,level,sharable 0.1.2 \\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 15] 11+ low,level,sharable 0.1.3 \\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 15] 11+ low,level,sharable 0.7.3 \\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 15] 11+ low,level,sharable 0.17.0 \\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 15] 10+ low,level,sharable 0.14.0 \\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 15] 11+ low,level,sharable 0.14.1 \\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 15] 0+ low,level,sharable 0.14.2 \\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 15] 0+ low,level,sharable 0.14.3 \\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 15] 0+ low,level,sharable 0.13.0 \\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 15] 0+ low,level,sharable 0.13.1 \\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 15] 10+ low,level,sharable 0.13.2 \\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 15] 11+ low,level,sharable 0.13.3 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f4000000, size 26, enabled found-> vendor=0x8086, dev=0x7180, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7181, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x010f, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7110, revid=0x01 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000ffa0, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000dce0, size 5, enabled pcib0: matched entry for 0.7.INTD (src \\_SB_.LNKD) pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 15 ACPI PCI link arbitrated settings: \\_SB_.LNKD (references 5, priority 38295): interrupts: 11 10 5 9 12 7 6 4 3 15 penalty: 140 140 190 280 5140 5140 5140 5140 5140 50140 \\_SB_.LNKA (references 3, priority 22977): interrupts: 11 10 5 9 12 7 6 4 3 15 penalty: 140 140 190 280 5140 5140 5140 5140 5140 50140 \\_SB_.LNKB (references 3, priority 22977): interrupts: 11 10 5 9 12 7 6 4 3 15 penalty: 140 140 190 280 5140 5140 5140 5140 5140 50140 \\_SB_.LNKC (references 3, priority 22977): interrupts: 11 10 5 9 12 7 6 4 3 15 penalty: 140 140 190 280 5140 5140 5140 5140 5140 50140 pcib0: slot 7 INTD routed to irq 11 via \\_SB_.LNKD found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[90]: type 4, range 32, base 00000850, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x01 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base fa000000, size 12, enabled map[14]: type 4, range 32, base 0000dcc0, size 5, enabled map[18]: type 1, range 32, base ff000000, size 20, enabled pcib0: matched entry for 0.14.INTA (src \\_SB_.LNKC) pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 15 ACPI PCI link arbitrated settings: \\_SB_.LNKA (references 3, priority 23454): interrupts: 10 11 5 9 12 7 6 4 3 15 penalty: 280 330 330 560 5280 5280 5280 5280 5280 50280 \\_SB_.LNKB (references 3, priority 23454): interrupts: 10 11 5 9 12 7 6 4 3 15 penalty: 280 330 330 560 5280 5280 5280 5280 5280 50280 \\_SB_.LNKC (references 3, priority 23454): interrupts: 10 11 5 9 12 7 6 4 3 15 penalty: 280 330 330 560 5280 5280 5280 5280 5280 50280 pcib0: slot 14 INTA routed to irq 10 via \\_SB_.LNKC found-> vendor=0x8086, dev=0x1229, revid=0x05 bus=0, slot=14, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=10 powerspec 1 supports D0 D1 D2 D3 current D0 found-> vendor=0x1011, dev=0x0024, revid=0x03 bus=0, slot=15, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) agp0: <Intel 82443LX (440 LX) host to PCI bridge> mem 0xf4000000-0xf7ffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf4000000 agp0: allocating GATT for aperture of size 64M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xfc000000-0xfeffffff pcib1: prefetched decode 0xf9000000-0xf9ffffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base fd000000, size 24, enabled pcib1: device (null) requested decoded memory range 0xfd000000-0xfdffffff map[14]: type 4, range 32, base 0000ec00, size 8, enabled pcib1: device (null) requested decoded I/O range 0xec00-0xecff map[18]: type 1, range 32, base fcfff000, size 12, enabled pcib1: device (null) requested decoded memory range 0xfcfff000-0xfcffffff found-> vendor=0x1002, dev=0x4744, revid=0x5c bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0083, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=00 ostat0=ff ostat1=ff ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=01 ostat0=00 ostat1=ff ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: [MPSAFE] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xdce0-0xdcff irq 11 at device 7.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdce0 uhci0: [GIANT-LOCKED] usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge> at device 7.3 (no driver attached) fxp0: <Intel 82558 Pro/100 Ethernet> port 0xdcc0-0xdcdf mem 0xff000000-0xff0fffff,0xfa000000-0xfa000fff irq 10 at device 14.0 on pci0 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfa000000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 8086 000a 0005 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:a0:c9:af:3e:51 fxp0: [MPSAFE] pcib2: <ACPI PCI-PCI bridge> at device 15.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xfff00000-0xfffff pcib2: prefetched decode 0xfff00000-0xfffff ACPI PCI link initial configuration: \\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 15] 0+ low,level,sharable 2.9.0 \\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 15] 0+ low,level,sharable 2.9.1 \\_SB_.LNKC irq*10: [ 3 4 5 6 7 9 10 11 12 15] 10+ low,level,sharable 2.9.2 \\_SB_.LNKD irq*11: [ 3 4 5 6 7 9 10 11 12 15] 11+ low,level,sharable 2.9.3 \\_SB_.LNKD irq*11: [ 3 4 5 6 7 9 10 11 12 15] 11+ low,level,sharable 2.10.0 \\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 15] 0+ low,level,sharable 2.10.1 \\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 15] 0+ low,level,sharable 2.10.2 \\_SB_.LNKC irq*10: [ 3 4 5 6 7 9 10 11 12 15] 10+ low,level,sharable 2.10.3 \\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 15] 0+ low,level,sharable 2.11.0 \\_SB_.LNKC irq*10: [ 3 4 5 6 7 9 10 11 12 15] 10+ low,level,sharable 2.11.1 \\_SB_.LNKD irq*11: [ 3 4 5 6 7 9 10 11 12 15] 11+ low,level,sharable 2.11.2 \\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 15] 0+ low,level,sharable 2.11.3 pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 mss_probe: bus acpi0 is probing device pcm0 pnpmss_probe: bus acpi0 is probing device pcm0 lid f0cd041h, vid ffffffffh pnpmss_probe result 6 mss_probe: bus acpi0 is probing device pcm0 pnpmss_probe: bus acpi0 is probing device pcm0 lid f0cd041h, vid ffffffffh pnpmss_probe result 6 mss_probe: bus acpi0 is probing device pcm0 pnpmss_probe: bus acpi0 is probing device pcm0 lid f0cd041h, vid ffffffffh pnpmss_probe result 6 mss_probe: bus acpi0 is probing device pcm0 pnpmss_probe: bus acpi0 is probing device pcm0 lid f0cd041h, vid ffffffffh pnpmss_probe result 6 mss_probe: bus acpi0 is probing device pcm0 pnpmss_probe: bus acpi0 is probing device pcm0 lid 0h, vid ffffffffh pnpmss_probe result 6 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz0: _PSV value is absurd, ignored (-273.-2C) mss_probe: bus acpi0 is probing device pcm0 pnpmss_probe: bus acpi0 is probing device pcm0 lid 0h, vid ffffffffh pnpmss_probe result 6 mss_probe: bus acpi0 is probing device pcm0 pnpmss_probe: bus acpi0 is probing device pcm0 lid 8d041h, vid ffffffffh pnpmss_probe result 6 fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 73 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 mss_probe: bus acpi0 is probing device pcm0 pnpmss_probe: bus acpi0 is probing device pcm0 lid f0cd041h, vid ffffffffh pnpmss_probe result 6 mss_probe: bus acpi0 is probing device pcm0 pnpmss_probe: bus acpi0 is probing device pcm0 lid f0cd041h, vid ffffffffh pnpmss_probe result 6 mss_probe: bus acpi0 is probing device pcm0 pnpmss_probe: bus acpi0 is probing device pcm0 lid f0cd041h, vid ffffffffh pnpmss_probe result 6 mss_probe: bus acpi0 is probing device pcm0 pnpmss_probe: bus acpi0 is probing device pcm0 lid f0cd041h, vid ffffffffh pnpmss_probe result 6 mss_probe: bus acpi0 is probing device pcm0 pnpmss_probe: bus acpi0 is probing device pcm0 lid 0h, vid ffffffffh pnpmss_probe result 6 mss_probe: bus acpi0 is probing device pcm0 pnpmss_probe: bus acpi0 is probing device pcm0 lid 8d041h, vid ffffffffh pnpmss_probe result 6 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 CSC0000: start dependent (0) CSC0000: adding dma mask 0xa CSC0000: adding dma mask 0xb CSC0000: adding irq mask 0x2a0 CSC0000: adding io range 0x534-0x60b, size=0x4, align=0xd4 CSC0000: adding io range 0x388-0x38b, size=0x4, align=0x8 CSC0000: adding io range 0x220-0x24f, size=0x10, align=0x20 CSC0000: start dependent (1) CSC0000: adding dma mask 0xb CSC0000: adding irq mask 0x9aa0 CSC0000: adding io range 0x534-0xfff, size=0x4, align=0x4 CSC0000: adding io range 0x388-0x3f3, size=0x4, align=0x8 CSC0000: adding io range 0x220-0x26f, size=0x10, align=0x10 CSC0000: end dependent CSC000f: start dependent (0) CSC000f: adding io range 0x3a0-0x3ff, size=0x8, align=0x8 CSC000f: end dependent CSC0010: adding io range 0xf00-0xfef, size=0x8, align=0x8 CSC0003: start dependent (0) CSC0003: adding io range 0x330-0x3f1, size=0x2, align=0x8 CSC0003: end dependent sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xc8000-0xc87ff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices mss_probe: bus isa0 is probing device pcm0 pnpmss_probe: bus isa0 is probing device pcm0 lid 630eh, vid 3568630eh pnpmss_probe result 0 pcm0: <CS4236B> at port 0x220-0x22f,0x388-0x38b,0x534-0x537 irq 5 drq 0,1 on isa0 CS4236B X25 reg: ebh pcm0: [GIANT-LOCKED] pcm0: sndbuf_setmap ff4000, 1000; 0xcc14e000 -> ff4000 pcm0: sndbuf_setmap ff3000, 1000; 0xcc14f000 -> ff3000 mss_probe: bus isa0 is probing device pcm1 pnpmss_probe: bus isa0 is probing device pcm1 lid f00630eh, vid 3568630eh pnpmss_probe result 6 unknown: <Game> failed to probe at port 0x3a0-0x3a7 on isa0 mss_probe: bus isa0 is probing device pcm1 pnpmss_probe: bus isa0 is probing device pcm1 lid 1000630eh, vid 3568630eh pnpmss_probe result 6 unknown: <Ctrl> failed to probe at port 0xf00-0xf07 on isa0 mss_probe: bus isa0 is probing device pcm1 pnpmss_probe: bus isa0 is probing device pcm1 lid 300630eh, vid 3568630eh pnpmss_probe result 6 unknown: <MPU> failed to probe at port 0x330-0x331 on isa0 Device configuration finished. procfs registered Timecounter "TSC" frequency 331109194 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin ata1-master: setting PIO4 on Intel PIIX4 chip acd0: <TOSHIBA CD-ROM XM-6202B/1108> CDROM drive at ata1 as master acd0: read 5512KB/s (5512KB/s), 256KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ...DHCP stuff deleted... start_init: trying /sbin/init splash: image decoder found: green_saver Linux ELF exec handler installed FreeBSD Audio Driver (newpcm) Installed devices: pcm0: <CS4236B> at io 0x534 irq 5 drq 1:0 bufsz 4096 (1p/1r/0v channels duplex default) HarryReceived on Mon Jul 11 2005 - 17:18:39 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:38 UTC