amp wrote: > You can try by issuing: > > shell# kldload agp > > (check your ttyv0 console or /var/log/messages for some info) > > If it OK, you can use the agp module by putting *agp_load="YES"* on > /boot/loader.conf > or recompile the kernel back by inserting *device agp* on your kernel > configuration. > > OK, as I said, I tried both agp in the config-file and in loader.conf - but no change. As you can see from the following, it doesn't detect my i855 integrated graphics controller, which I assume it should. this is the kernel-configuration: machine i386 cpu I686_CPU ident LBE options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directoriesoptions MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server options NFS_ROOT # NFS usable as /, requires NFSCLIENT options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS)options PSEUDOFS # Pseudo-filesystem framework options GEOM_GPT # GUID Partition Tables. options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. options ADAPTIVE_GIANT # Giant mutex is adaptive. device isa device pci device fdc device ata device atadisk # ATA disk drives device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID # Static device numbering device atapicam device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support device sc device npx device pmtimer device cbb # cardbus (yenta) bridge device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus device sio # 8250, 16[45]50 based serial ports device ppc device ppbus # Parallel port bus (required) device lpt # Printer device miibus # MII bus support device bge # Broadcom BCM570xx Gigabit Ethernet device wlan # 802.11 support device an # Aironet 4500/4800 802.11 wireless NICs. device awi # BayStack 660 and others device ral # Ralink Technology RT2500 wireless NICs. device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. device iwi device loop # Network loopback device mem # Memory and kernel memory devices device io # I/O device device random # Entropy device device ether # Ethernet support device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) device bpf # Berkeley packet filter device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device ural # Ralink Technology RT2500USB wireless NICs device urio # Diamond Rio 500 MP3 player device uscanner # Scanners device firewire # FireWire bus code device sbp # SCSI over FireWire (Requires scbus and da) That's my loader.conf: lbe# cat /boot/loader.conf agp_load="YES" snd_ich_load="YES" acpi_fujitsu_load="YES" cpufreq_load="YES" acpi_video_load="YES" smbus_load="YES" iicsmb_load="YES" bktr_load="YES" That's what I get from a dmesg: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA1 #2: Wed Jul 20 13:49:44 CEST 2005 root_at_lbe.example.org:/usr/obj/usr/src/sys/LBE Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1.60GHz (1600.06-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6 Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0x180<EST,TM2> real memory = 527368192 (502 MB) avail memory = 506732544 (483 MB) bktr_mem: memory holder loaded npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <FUJ FJNB185> on motherboard acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0 pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0 pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0 pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0 pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfc08-0xfc0b on acpi0 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral> at device 0.1 (no driver attached) pci0: <base peripheral> at device 0.3 (no driver attached) acpi_video0: <ACPI video extension> port 0x1800-0x1807 mem 0xd8000000-0xdfffffff,0xd0000000-0xd007ffff irq 11 at device 2.0 on pci0 pci0: <display> at device 2.1 (no driver attached) uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 11 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 11 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f irq 11 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> mem 0xd0100000-0xd01003ff irq 11 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib1 cbb0: <PCI-CardBus Bridge> irq 11 at device 10.0 on pci1 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <PCI-CardBus Bridge> irq 11 at device 10.1 on pci1 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pci1: <base peripheral> at device 10.2 (no driver attached) cbb2: <PCI-CardBus Bridge> at device 10.3 on pci1 cardbus2: <CardBus bus> on cbb2 pccard2: <16-bit PCCard bus> on cbb2 bge0: <Broadcom BCM5705M Gigabit Ethernet, ASIC rev. 0x3003> mem 0xd0200000-0xd020ffff irq 11 at device 12.0 on pci1 miibus0: <MII bus> on bge0 brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:0b:5d:4c:4e:b9 iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xd0215000-0xd0215fff irq 11 at device 13.0 on pci1 iwi0: Ethernet address: 00:0e:35:28:4e:18 fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem 0xd0216000-0xd02167ff,0xd0210000-0xd0213fff irq 11 at device 14.0 on pci1 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:00:0e:10:02:90:a7:76 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xd0100c00-0xd0100dff,0xd0100800-0xd01008ff irq 11 at device 31.5 on pci0 pcm0: [GIANT-LOCKED] pcm0: <Unknown AC97 Codec (id = 0x414c4770)> pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_button0: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1 port 0x2e8-0x2ef,0x400-0x43f irq 3 drq 3 on acpi0 sio1: type 16550A ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port acpi_fujitsu0: <Fujitsu Function Buttons> on acpi0 acpi_fujitsu0: Couldn't query volume level acpi_fujitsu0: Couldn't init button states acpi_fujitsu0: Couldn't initialize button states! pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xdc000-0xdffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1600062995 Hz quality 800 Timecounters tick every 1.000 msec ad0: 38154MB <Seagate ST94019A 3.05> at ata0-master UDMA100 acd0: CDRW <TOSHIBA DVD-ROM SD-R2512/1F20> at ata1-master UDMA33 ATA PseudoRAID loaded cd0 at ata1 bus 0 target 0 lun 0 cd0: <TOSHIBA DVD-ROM SD-R2512 1F20> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ad0s1a acpi_fujitsu0: Couldn't query method acpi_fujitsu0: Couldn't query method acpi_fujitsu0: Couldn't query method acpi_fujitsu0: Couldn't query method And that's what pciconf -lv says: hostb0_at_pci0:0:0: class=0x060000 card=0x11d510cf chip=0x35808086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82852GM/GME/GMV/PM, 855GM/GME Montara Host-Hub Interface Bridge' class = bridge subclass = HOST-PCI none0_at_pci0:0:1: class=0x088000 card=0x11d510cf chip=0x35848086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82852GM/GME/GMV/PM, 855GM/GME Montara System Memory Controller' class = base peripheral none1_at_pci0:0:3: class=0x088000 card=0x11d510cf chip=0x35858086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82852GM/GME/GMV/PM, 855GM/GME Montara Configuration Process' class = base peripheral acpi_video0_at_pci0:2:0: class=0x030000 card=0x128110cf chip=0x35828086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated Graphics Device' class = display subclass = VGA none2_at_pci0:2:1: class=0x038000 card=0x128110cf chip=0x35828086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated Graphics Device' class = display uhci0_at_pci0:29:0: class=0x0c0300 card=0x11ab10cf chip=0x24c28086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1' class = serial bus subclass = USB uhci1_at_pci0:29:1: class=0x0c0300 card=0x11ab10cf chip=0x24c48086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2' class = serial bus subclass = USB uhci2_at_pci0:29:2: class=0x0c0300 card=0x11ab10cf chip=0x24c78086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3' class = serial bus subclass = USB ehci0_at_pci0:29:7: class=0x0c0320 card=0x11ab10cf chip=0x24cd8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI Controller' class = serial bus subclass = USB pcib1_at_pci0:30:0: class=0x060400 card=0x00000000 chip=0x24488086 rev=0x83 hdr=0x01 vendor = 'Intel Corporation' device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0_at_pci0:31:0: class=0x060100 card=0x00000000 chip=0x24cc8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801DBM (ICH4-M) LPC Interface Bridge' class = bridge subclass = PCI-ISA atapci0_at_pci0:31:1: class=0x01018a card=0x11ab10cf chip=0x24ca8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801DBM (ICH4-M) UltraATA/100 EIDE Controller' class = mass storage subclass = ATA none3_at_pci0:31:3: class=0x0c0500 card=0x11ab10cf chip=0x24c38086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller' class = serial bus subclass = SMBus pcm0_at_pci0:31:5: class=0x040100 card=0x127d10cf chip=0x24c58086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller' class = multimedia subclass = audio none4_at_pci0:31:6: class=0x070300 card=0x10d110cf chip=0x24c68086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller' class = simple comms subclass = generic modem cbb0_at_pci1:10:0: class=0x060700 card=0x11c410cf chip=0x72231217 rev=0x00 hdr=0x02 vendor = 'O2 Micro Inc' device = 'OZ711M3 SmartCardBus MultiMediaBay Controller' class = bridge subclass = PCI-CardBus cbb1_at_pci1:10:1: class=0x060700 card=0x11c410cf chip=0x72231217 rev=0x00 hdr=0x02 vendor = 'O2 Micro Inc' device = 'OZ711M3 SmartCardBus MultiMediaBay Controller' class = bridge subclass = PCI-CardBus none5_at_pci1:10:2: class=0x088000 card=0x11c410cf chip=0x71101217 rev=0x00 hdr=0x00 vendor = 'O2 Micro Inc' device = 'OZ711Mx MemoryCardBus Accelerator' class = base peripheral cbb2_at_pci1:10:3: class=0x060700 card=0x11c410cf chip=0x72231217 rev=0x00 hdr=0x02 vendor = 'O2 Micro Inc' device = 'OZ711M3 SmartCardBus MultiMediaBay Controller' class = bridge subclass = PCI-CardBus bge0_at_pci1:12:0: class=0x020000 card=0x127910cf chip=0x165e14e4 rev=0x03 hdr=0x00 vendor = 'Broadcom Corporation' device = 'BCM5705MA2 NetXtreme Gigabit Ethernet' class = network subclass = ethernet iwi0_at_pci1:13:0: class=0x028000 card=0x27028086 chip=0x42208086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = 'PRO/Wireless 2200BG Network Connection' class = network fwohci0_at_pci1:14:0: class=0x0c0010 card=0x116210cf chip=0x8026104c rev=0x00 hdr=0x00 vendor = 'Texas Instruments (TI)' device = 'TSB43AB21 1394a-2000 OHCI PHY/link-layer Controller' class = serial bus subclass = FireWireReceived on Wed Jul 20 2005 - 10:19:34 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:39 UTC