Hi Rainer, guys. I have the same problem on my Thinkpad R50e where they used exactly the same graphic card. X-video does not work since it cannot detect my card as agp device. I tried the module, tried to compile it into the kernel on both 6.0 and 7.0 with no luck... Cheers, Marcin Jessa On Wed, 20 Jul 2005 14:19:24 +0200 Rainer Duffner <rainer_at_ultra-secure.de> wrote: > amp wrote: > > > You can try by issuing: > > > > shell# kldload agp > > > > (check your ttyv0 console or /var/log/messages for some info) > > > > If it OK, you can use the agp module by putting *agp_load="YES"* on > > /boot/loader.conf > > or recompile the kernel back by inserting *device agp* on your kernel > > configuration. > > > > > > > OK, > > as I said, I tried both agp in the config-file and in loader.conf - but > no change. > > As you can see from the following, it doesn't detect my i855 integrated > graphics controller, which I assume it should. > > > this is the kernel-configuration: > > machine i386 > cpu I686_CPU > ident LBE > options SCHED_4BSD # 4BSD scheduler > options PREEMPTION # Enable kernel thread preemption > options INET # InterNETworking > options INET6 # IPv6 communications protocols > options FFS # Berkeley Fast Filesystem > options SOFTUPDATES # Enable FFS soft updates support > options UFS_ACL # Support for access control lists > options UFS_DIRHASH # Improve performance on big > directoriesoptions MD_ROOT # MD is a potential > root device > options NFSCLIENT # Network Filesystem Client > options NFSSERVER # Network Filesystem Server > options NFS_ROOT # NFS usable as /, requires > NFSCLIENT > options MSDOSFS # MSDOS Filesystem > options CD9660 # ISO 9660 Filesystem > options PROCFS # Process filesystem (requires > PSEUDOFS)options PSEUDOFS # Pseudo-filesystem > framework > options GEOM_GPT # GUID Partition Tables. > options COMPAT_43 # Compatible with BSD 4.3 [KEEP > THIS!] > options COMPAT_FREEBSD4 # Compatible with FreeBSD4 > options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI > options KTRACE # ktrace(1) support > options SYSVSHM # SYSV-style shared memory > options SYSVMSG # SYSV-style message queues > options SYSVSEM # SYSV-style semaphores > options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time > extensions > options KBD_INSTALL_CDEV # install a CDEV entry in /dev > options AHC_REG_PRETTY_PRINT # Print register bitfields in debug > # output. Adds ~128k to driver. > options AHD_REG_PRETTY_PRINT # Print register bitfields in debug > # output. Adds ~215k to driver. > options ADAPTIVE_GIANT # Giant mutex is adaptive. > device isa > device pci > device fdc > device ata > device atadisk # ATA disk drives > device ataraid # ATA RAID drives > device atapicd # ATAPI CDROM drives > device atapifd # ATAPI floppy drives > device atapist # ATAPI tape drives > options ATA_STATIC_ID # Static device numbering > device atapicam > device scbus # SCSI bus (required for SCSI) > device ch # SCSI media changers > device da # Direct Access (disks) > device sa # Sequential Access (tape etc) > device cd # CD > device pass # Passthrough device (direct SCSI access) > device ses # SCSI Environmental Services (and SAF-TE) > device atkbdc # AT keyboard controller > device atkbd # AT keyboard > device psm # PS/2 mouse > device vga # VGA video card driver > device splash # Splash screen and screen saver support > device sc > device npx > device pmtimer > device cbb # cardbus (yenta) bridge > device pccard # PC Card (16-bit) bus > device cardbus # CardBus (32-bit) bus > device sio # 8250, 16[45]50 based serial ports > device ppc > device ppbus # Parallel port bus (required) > device lpt # Printer > device miibus # MII bus support > device bge # Broadcom BCM570xx Gigabit Ethernet > device wlan # 802.11 support > device an # Aironet 4500/4800 802.11 wireless NICs. > device awi # BayStack 660 and others > device ral # Ralink Technology RT2500 wireless NICs. > device wi # WaveLAN/Intersil/Symbol 802.11 > wireless NICs. > device iwi > device loop # Network loopback > device mem # Memory and kernel memory devices > device io # I/O device > device random # Entropy device > device ether # Ethernet support > device tun # Packet tunnel. > device pty # Pseudo-ttys (telnet etc) > device md # Memory "disks" > device gif # IPv6 and IPv4 tunneling > device faith # IPv6-to-IPv4 relaying (translation) > device bpf # Berkeley packet filter > device uhci # UHCI PCI->USB interface > device ohci # OHCI PCI->USB interface > device ehci # EHCI PCI->USB interface (USB 2.0) > device usb # USB Bus (required) > device ugen # Generic > device uhid # "Human Interface Devices" > device ukbd # Keyboard > device ulpt # Printer > device umass # Disks/Mass storage - Requires scbus and da > device ums # Mouse > device ural # Ralink Technology RT2500USB wireless NICs > device urio # Diamond Rio 500 MP3 player > device uscanner # Scanners > device firewire # FireWire bus code > device sbp # SCSI over FireWire (Requires scbus and da) > > > That's my loader.conf: > lbe# cat /boot/loader.conf > agp_load="YES" > snd_ich_load="YES" > acpi_fujitsu_load="YES" > cpufreq_load="YES" > acpi_video_load="YES" > smbus_load="YES" > iicsmb_load="YES" > bktr_load="YES" > > > That's what I get from a dmesg: > > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 6.0-BETA1 #2: Wed Jul 20 13:49:44 CEST 2005 > root_at_lbe.example.org:/usr/obj/usr/src/sys/LBE > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Pentium(R) M processor 1.60GHz (1600.06-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6 > > Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> > Features2=0x180<EST,TM2> > real memory = 527368192 (502 MB) > avail memory = 506732544 (483 MB) > bktr_mem: memory holder loaded > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <FUJ FJNB185> on motherboard > acpi0: Power Button (fixed) > pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 > pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0 > pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0 > pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0 > pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0 > pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0 > pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0 > pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfc08-0xfc0b on acpi0 > cpu0: <ACPI CPU> on acpi0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pci0: <base peripheral> at device 0.1 (no driver attached) > pci0: <base peripheral> at device 0.3 (no driver attached) > acpi_video0: <ACPI video extension> port 0x1800-0x1807 mem > 0xd8000000-0xdfffffff,0xd0000000-0xd007ffff irq 11 at device 2.0 on pci0 > pci0: <display> at device 2.1 (no driver attached) > uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f > irq 11 at device 29.0 on pci0 > uhci0: [GIANT-LOCKED] > usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f > irq 11 at device 29.1 on pci0 > uhci1: [GIANT-LOCKED] > usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f > irq 11 at device 29.2 on pci0 > uhci2: [GIANT-LOCKED] > usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > ehci0: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> mem > 0xd0100000-0xd01003ff irq 11 at device 29.7 on pci0 > ehci0: [GIANT-LOCKED] > usb3: EHCI version 1.0 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2 > usb3: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> on ehci0 > usb3: USB revision 2.0 > uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub3: 6 ports with 6 removable, self powered > pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > cbb0: <PCI-CardBus Bridge> irq 11 at device 10.0 on pci1 > cardbus0: <CardBus bus> on cbb0 > pccard0: <16-bit PCCard bus> on cbb0 > cbb1: <PCI-CardBus Bridge> irq 11 at device 10.1 on pci1 > cardbus1: <CardBus bus> on cbb1 > pccard1: <16-bit PCCard bus> on cbb1 > pci1: <base peripheral> at device 10.2 (no driver attached) > cbb2: <PCI-CardBus Bridge> at device 10.3 on pci1 > cardbus2: <CardBus bus> on cbb2 > pccard2: <16-bit PCCard bus> on cbb2 > bge0: <Broadcom BCM5705M Gigabit Ethernet, ASIC rev. 0x3003> mem > 0xd0200000-0xd020ffff irq 11 at device 12.0 on pci1 > miibus0: <MII bus> on bge0 > brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, > 1000baseTX-FDX, auto > bge0: Ethernet address: 00:0b:5d:4c:4e:b9 > iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xd0215000-0xd0215fff irq 11 at > device 13.0 on pci1 > iwi0: Ethernet address: 00:0e:35:28:4e:18 > fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem > 0xd0216000-0xd02167ff,0xd0210000-0xd0213fff irq 11 at device 14.0 on pci1 > fwohci0: OHCI version 1.10 (ROM=0) > fwohci0: No. of Isochronous channels is 4. > fwohci0: EUI64 00:00:0e:10:02:90:a7:76 > fwohci0: Phy 1394a available S400, 1 ports. > fwohci0: Link S400, max_rec 2048 bytes. > firewire0: <IEEE1394(FireWire) bus> on fwohci0 > sbp0: <SBP-2/SCSI over FireWire> on firewire0 > fwohci0: Initiate bus reset > fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode > firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) > firewire0: bus manager 0 (me) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH4 UDMA100 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem > 0xd0100c00-0xd0100dff,0xd0100800-0xd01008ff irq 11 at device 31.5 on pci0 > pcm0: [GIANT-LOCKED] > pcm0: <Unknown AC97 Codec (id = 0x414c4770)> > pci0: <simple comms, generic modem> at device 31.6 (no driver attached) > acpi_button0: <Power Button> on acpi0 > acpi_lid0: <Control Method Lid Switch> on acpi0 > acpi_acad0: <AC Adapter> on acpi0 > acpi_cmbat0: <Control Method Battery> on acpi0 > acpi_cmbat1: <Control Method Battery> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model Generic PS/2 mouse, device ID 0 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 > sio0: type 16550A > sio1 port 0x2e8-0x2ef,0x400-0x43f irq 3 drq 3 on acpi0 > sio1: type 16550A > ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77b irq > 7 on acpi0 > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > ppbus0: <Parallel port bus> on ppc0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > acpi_fujitsu0: <Fujitsu Function Buttons> on acpi0 > acpi_fujitsu0: Couldn't query volume level > acpi_fujitsu0: Couldn't init button states > acpi_fujitsu0: Couldn't initialize button states! > pmtimer0 on isa0 > orm0: <ISA Option ROM> at iomem 0xdc000-0xdffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounter "TSC" frequency 1600062995 Hz quality 800 > Timecounters tick every 1.000 msec > ad0: 38154MB <Seagate ST94019A 3.05> at ata0-master UDMA100 > acd0: CDRW <TOSHIBA DVD-ROM SD-R2512/1F20> at ata1-master UDMA33 > ATA PseudoRAID loaded > cd0 at ata1 bus 0 target 0 lun 0 > cd0: <TOSHIBA DVD-ROM SD-R2512 1F20> Removable CD-ROM SCSI-0 device > cd0: 33.000MB/s transfers > cd0: Attempt to query device size failed: NOT READY, Medium not present > Trying to mount root from ufs:/dev/ad0s1a > acpi_fujitsu0: Couldn't query method > acpi_fujitsu0: Couldn't query method > acpi_fujitsu0: Couldn't query method > acpi_fujitsu0: Couldn't query method > > > And that's what pciconf -lv says: > hostb0_at_pci0:0:0: class=0x060000 card=0x11d510cf chip=0x35808086 > rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '82852GM/GME/GMV/PM, 855GM/GME Montara Host-Hub Interface > Bridge' class = bridge > subclass = HOST-PCI > none0_at_pci0:0:1: class=0x088000 card=0x11d510cf chip=0x35848086 rev=0x02 > hdr=0x00 vendor = 'Intel Corporation' > device = '82852GM/GME/GMV/PM, 855GM/GME Montara System Memory > Controller' > class = base peripheral > none1_at_pci0:0:3: class=0x088000 card=0x11d510cf chip=0x35858086 rev=0x02 > hdr=0x00 vendor = 'Intel Corporation' > device = '82852GM/GME/GMV/PM, 855GM/GME Montara Configuration Process' > class = base peripheral > acpi_video0_at_pci0:2:0: class=0x030000 card=0x128110cf chip=0x35828086 > rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated > Graphics Device' > class = display > subclass = VGA > none2_at_pci0:2:1: class=0x038000 card=0x128110cf chip=0x35828086 rev=0x02 > hdr=0x00 vendor = 'Intel Corporation' > device = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated > Graphics Device' > class = display > uhci0_at_pci0:29:0: class=0x0c0300 card=0x11ab10cf chip=0x24c28086 > rev=0x03 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1' > class = serial bus > subclass = USB > uhci1_at_pci0:29:1: class=0x0c0300 card=0x11ab10cf chip=0x24c48086 > rev=0x03 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2' > class = serial bus > subclass = USB > uhci2_at_pci0:29:2: class=0x0c0300 card=0x11ab10cf chip=0x24c78086 > rev=0x03 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3' > class = serial bus > subclass = USB > ehci0_at_pci0:29:7: class=0x0c0320 card=0x11ab10cf chip=0x24cd8086 > rev=0x03 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI > Controller' > class = serial bus > subclass = USB > pcib1_at_pci0:30:0: class=0x060400 card=0x00000000 chip=0x24488086 > rev=0x83 hdr=0x01 > vendor = 'Intel Corporation' > device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI > Bridge' > class = bridge > subclass = PCI-PCI > isab0_at_pci0:31:0: class=0x060100 card=0x00000000 chip=0x24cc8086 > rev=0x03 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801DBM (ICH4-M) LPC Interface Bridge' > class = bridge > subclass = PCI-ISA > atapci0_at_pci0:31:1: class=0x01018a card=0x11ab10cf chip=0x24ca8086 > rev=0x03 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801DBM (ICH4-M) UltraATA/100 EIDE Controller' > class = mass storage > subclass = ATA > none3_at_pci0:31:3: class=0x0c0500 card=0x11ab10cf chip=0x24c38086 > rev=0x03 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller' > class = serial bus > subclass = SMBus > pcm0_at_pci0:31:5: class=0x040100 card=0x127d10cf chip=0x24c58086 rev=0x03 > hdr=0x00 vendor = 'Intel Corporation' > device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller' > class = multimedia > subclass = audio > none4_at_pci0:31:6: class=0x070300 card=0x10d110cf chip=0x24c68086 > rev=0x03 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller' > class = simple comms > subclass = generic modem > cbb0_at_pci1:10:0: class=0x060700 card=0x11c410cf chip=0x72231217 rev=0x00 > hdr=0x02 vendor = 'O2 Micro Inc' > device = 'OZ711M3 SmartCardBus MultiMediaBay Controller' > class = bridge > subclass = PCI-CardBus > cbb1_at_pci1:10:1: class=0x060700 card=0x11c410cf chip=0x72231217 rev=0x00 > hdr=0x02 vendor = 'O2 Micro Inc' > device = 'OZ711M3 SmartCardBus MultiMediaBay Controller' > class = bridge > subclass = PCI-CardBus > none5_at_pci1:10:2: class=0x088000 card=0x11c410cf chip=0x71101217 > rev=0x00 hdr=0x00 > vendor = 'O2 Micro Inc' > device = 'OZ711Mx MemoryCardBus Accelerator' > class = base peripheral > cbb2_at_pci1:10:3: class=0x060700 card=0x11c410cf chip=0x72231217 rev=0x00 > hdr=0x02 vendor = 'O2 Micro Inc' > device = 'OZ711M3 SmartCardBus MultiMediaBay Controller' > class = bridge > subclass = PCI-CardBus > bge0_at_pci1:12:0: class=0x020000 card=0x127910cf chip=0x165e14e4 rev=0x03 > hdr=0x00 vendor = 'Broadcom Corporation' > device = 'BCM5705MA2 NetXtreme Gigabit Ethernet' > class = network > subclass = ethernet > iwi0_at_pci1:13:0: class=0x028000 card=0x27028086 chip=0x42208086 rev=0x05 > hdr=0x00 vendor = 'Intel Corporation' > device = 'PRO/Wireless 2200BG Network Connection' > class = network > fwohci0_at_pci1:14:0: class=0x0c0010 card=0x116210cf chip=0x8026104c > rev=0x00 hdr=0x00 > vendor = 'Texas Instruments (TI)' > device = 'TSB43AB21 1394a-2000 OHCI PHY/link-layer Controller' > class = serial bus > subclass = FireWire > > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"Received on Wed Jul 20 2005 - 17:55:47 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:39 UTC