Silent ACPI-related reset booting latest kernel.

From: Frank Mayhar <fmayhar_at_gmail.com>
Date: Sat, 11 Jun 2005 22:47:38 -0700
I just rebuilt with the latest bits as of this afternoon.  Apparently,
some commit within the last 24 to 48 hours or so has broken ACPI on my
Inspiron 5160.  Booting with ACPI I get as far as

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights
reserved.
FreeBSD 6.0-CURRENT #43: Sat Jun 11 20:33:21 PDT 2005
    frank_at_lap:/home/obj/usr/src/sys/AUTON
WARNING: MPSAFE network stack disabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz (2790.72-MHz 686-class
CPU)
  Origin = "GenuineIntel"  Id = 0xf34  Stepping = 4

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x459d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,CNTX-ID,<b14>>
  Hyperthreading: 2 logical CPUs
real memory  = 536662016 (511 MB)
avail memory = 511586304 (487 MB)

and it silently reboots.

Without ACPI the boot continues.  A full dmesg (without ACPI, obviously)
is attached.

This is just a heads-up.  I haven't tried to figure it out yet and it's
late so I'll look at it tomorrow at the earliest.  (And maybe someone
will fix it overnight. :-)
-- 
Frank Mayhar frank_at_exit.com     http://www.exit.com/
Exit Consulting                 http://www.gpsclock.com/
                                http://www.exit.com/blog/frank/


Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #43: Sat Jun 11 20:33:21 PDT 2005
    frank_at_lap:/home/obj/usr/src/sys/AUTON
WARNING: MPSAFE network stack disabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz (2790.72-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf34  Stepping = 4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x459d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,CNTX-ID,<b14>>
  Hyperthreading: 2 logical CPUs
real memory  = 536662016 (511 MB)
avail memory = 511586304 (487 MB)
ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: Please update driver or contact the maintainer.
est: cpu_vendor GenuineIntel, msr 152800001528, bus_clk, 64
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
$PIR: Using invalid BIOS IRQ 11 from 0.29.INTA is for link 0x60
pci0: <PCI bus> on pcib0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce FX Go5200> mem 0xfc000000-0xfcffffff,0xd0000000-0xdfffffff irq 11 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> mem 0xf4fffc00-0xf4ffffff irq 11 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xfaffe000-0xfaffffff irq 11 at device 1.0 on pci2
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:0f:1f:26:c6:65
bfe0: [GIANT-LOCKED]
ath0: <Atheros 5212> mem 0xfafe0000-0xfafeffff irq 11 at device 2.0 on pci2
ath0: [GIANT-LOCKED]
ath0: Ethernet address: 00:02:6f:21:ed:0a
ath0: mac 5.9 phy 4.3 radio 3.6
cbb0: <TI4510 PCI-CardBus Bridge> irq 11 at device 4.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xfaffd800-0xfaffdfff,0xfaff8000-0xfaffbfff irq 11 at device 4.1 on pci2
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 34:4f:c0:00:26:8f:58:a1
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1f4ba000
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 36:4f:c0:8f:58:a1
fwe0: Ethernet address: 36:4f:c0:8f:58:a1
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcm0: <Intel ICH4 (82801DB)> port 0xb800-0xb8ff,0xbc40-0xbc7f mem 0xf4fff800-0xf4fff9ff,0xf4fff400-0xf4fff4ff irq 11 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
Timecounter "TSC" frequency 2790720503 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DVDROM <TEAC DVD-ROM DV-28E-C/D.4B> at ata0-master UDMA33
ad2: 57231MB <HTS548060M9AT00 MGBOA53A> at ata1-master UDMA100
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad2s4a
Received on Sun Jun 12 2005 - 03:47:46 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:36 UTC