Hello, after updating three days ago(both the bios and FreeBSD), my mouse stopped working. Under linux the mouse seems to work whereas the keyboard doesn't. I'm running with acpi enabled, vesa restore patch, vidcontrol & syscons patch (which do not work at the moment). The computer is a Dell Inspiron 5100 with bios version A32. Thanks for your help, Filippo Here comes the dmesg: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT #0: Fri Mar 10 09:02:31 CET 2006 root_at_portatile.fastwebnet.it:/usr/obj/usr/src/sys/PORTATILE WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0bdf000. Preloaded elf module "/boot/kernel/pf.ko" at 0xc0bdf158. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0bdf200. Preloaded elf module "/boot/kernel/sound.ko" at 0xc0bdf2ac. Preloaded elf module "/boot/kernel/if_ath.ko" at 0xc0bdf358. Preloaded elf module "/boot/kernel/ath_hal.ko" at 0xc0bdf404. Preloaded elf module "/boot/kernel/ath_rate.ko" at 0xc0bdf4b0. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0bdf560. Calibrating clock(s) ... i8254 clock: 1193183 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2790711440 Hz CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2790.71-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 1073516544 (1023 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c25000 - 0x000000003ed99fff, 1041715200 bytes (254325 pages) avail memory = 1041678336 (993 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xcfae pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: wlan: <802.11 Link Layer> ath_rate: <Atsushi Onoe's rate control algorithm> nfslock: pseudo-device io: <I/O> NEW_UNRHDR 0-ffffff -> 0xc22c8b00 mem: <memory> Pentium Pro MTRR support enabled VESA: information block 56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00 00 01 00 02 00 01 19 01 00 01 2f 01 00 01 34 01 00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01 94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01 VESA: 60 mode(s) found VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc0a13ac2 (1000022) VESA: ATI MOBILITY RADEON 7500 VESA: ATI Technologies Inc. M7 01.00 null: <null device, zero device> random: <entropy source, Software, Yarrow> ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25608086) pcibios: BIOS version 2.10 Found $PIR table, 10 entries at 0xc00fcbb0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 A 0x65 3 4 5 6 7 9 10 11 12 14 15 embedded 2 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 2 4 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 4 B 0x60 none embedded 2 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 2 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 8 0 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 8 0 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 8 1 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 8 1 B 0x63 3 4 5 6 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 atpic: Programming IRQ9 as level/low ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0x8e0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 9 10 11 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 9 10 11 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 9 10 11 pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 9 10 11 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 9 10 11 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 9 10 11 pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 9 10 11 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 9 10 11 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 pci_link4: <ACPI PCI Link LNKH> irq 11 on acpi0 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e0000000, size 27, enabled found-> vendor=0x8086, dev=0x2560, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2561, revid=0x02 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000bf80, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA:0) pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LNKA found-> vendor=0x8086, dev=0x24c2, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 0000bf40, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LNKD:0) pcib0: slot 29 INTB routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=0x8086, dev=0x24c4, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type 4, range 32, base 0000bf20, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LNKC:0) pcib0: slot 29 INTC routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=0x8086, dev=0x24c7, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[10]: type 1, range 32, base f4fffc00, size 10, enabled pcib0: matched entry for 0.29.INTD (src \\_SB_.PCI0.LNKH:0) pcib0: slot 29 INTD routed to irq 11 via \\_SB_.PCI0.LNKH found-> vendor=0x8086, dev=0x24cd, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x244e, revid=0x82 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24c0, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000bfa0, size 4, enabled found-> vendor=0x8086, dev=0x24cb, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[10]: type 4, range 32, base 0000b800, size 8, enabled map[14]: type 4, range 32, base 0000bc40, size 6, enabled map[18]: type 1, range 32, base f4fff800, size 9, enabled map[1c]: type 1, range 32, base f4fff400, size 8, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) pci_link1: Picked IRQ 9 with weight 0 pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB found-> vendor=0x8086, dev=0x24c5, revid=0x02 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 powerspec 2 supports D0 D3 current D0 agp0: <Intel 82845G host to AGP bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe0000000 agp0: allocating GATT for aperture of size 128M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xfc000000-0xfdffffff pcib1: prefetched decode 0xe8000000-0xefffffff pci_link5: <ACPI PCI Link LNKE> irq 11 on acpi0 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base e8000000, size 27, enabled pcib1: (null) requested memory range 0xe8000000-0xefffffff: good map[14]: type 4, range 32, base 0000c000, size 8, enabled pcib1: (null) requested I/O range 0xc000-0xc0ff: in range map[18]: type 1, range 32, base fcff0000, size 16, enabled pcib1: (null) requested memory range 0xfcff0000-0xfcffffff: good pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LNKE:0) pcib1: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKE found-> vendor=0x1002, dev=0x4c57, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x01a7, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf40 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20 uhci2: [GIANT-LOCKED] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf4fffc00-0xf4ffffff irq 11 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf4fffc00 ehci0: [GIANT-LOCKED] ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 ehci_pci_attach: companion usb2 usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: single transaction translator uhub3: 6 ports with 6 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xd000-0xefff pcib2: memory decode 0xf6000000-0xfbffffff pcib2: prefetched decode 0xfff00000-0xfffff pcib2: Subtractively decoded bridge. pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 1, range 32, base faffe000, size 13, enabled pcib2: (null) requested memory range 0xfaffe000-0xfaffffff: good pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKB:0) pcib2: slot 1 INTA routed to irq 9 via \\_SB_.PCI0.LNKB found-> vendor=0x14e4, dev=0x4401, revid=0x01 bus=2, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x104c, dev=0xac44, revid=0x02 bus=2, slot=4, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base faffd800, size 11, enabled pcib2: (null) requested memory range 0xfaffd800-0xfaffdfff: good map[14]: type 1, range 32, base faff8000, size 14, enabled pcib2: (null) requested memory range 0xfaff8000-0xfaffbfff: good pcib2: matched entry for 2.4.INTA (src \\_SB_.PCI0.LNKA:0) pcib2: slot 4 INTA routed to irq 11 via \\_SB_.PCI0.LNKA found-> vendor=0x104c, dev=0x8029, revid=0x00 bus=2, slot=4, func=1 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xfaffe000-0xfaffffff irq 9 at device 1.0 on pci2 bfe0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfaffe000 miibus0: <MII bus> on bfe0 bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: bpf attached bfe0: Ethernet address: 00:0b:db:18:b5:9c bfe0: [MPSAFE] cbb0: <TI4510 PCI-CardBus Bridge> at device 4.0 on pci2 pcib2: cbb0 requested memory range 0xf6000000-0xfbffffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf6000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: matched entry for 2.4.INTA (src \\_SB_.PCI0.LNKA:0) pcib2: slot 4 INTA routed to irq 11 via \\_SB_.PCI0.LNKA cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac44104c 0x02100007 0x06070002 0x00822008 0x10: 0xf6000000 0x020000a0 0x20040302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x01491028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x28405061 0x00000000 0x001f0000 0x00001002 0x90: 0x606482c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: vendor=104c, dev=8029 fwohci0: vendor=104c, dev=8029 fwohci0: <1394 Open Host Controller Interface> mem 0xfaff8000-0xfaffbfff,0xfaffd800-0xfaffdfff irq 11 at device 4.1 on pci2 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfaffd800 fwohci0: [MPSAFE] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 38:4f:c0:00:02:dc:d4:10 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 3a:4f:c0:dc:d4:10 fwe0: bpf attached fwe0: Ethernet address: 3a:4f:c0:dc:d4:10 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=01 ata0-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb ata0-slave: stat=0x01 err=0x04 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=10 stat1=01 devices=0x4<ATAPI_MASTER> ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata1-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata1: [MPSAFE] pcm0: <Intel ICH4 (82801DB)> port 0xbc40-0xbc7f,0xb800-0xb8ff mem 0xf4fff400-0xf4fff4ff,0xf4fff800-0xf4fff9ff irq 9 at device 31.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xb800 pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xbc40 pcm0: [GIANT-LOCKED] pcm0: <SigmaTel STAC9750/51 AC97 Codec (id = 0x83847650)> pcm0: Codec features headphone, 20 bit DAC, 20 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: Primary codec extended features variable rate PCM, reserved 1, AMAP, reserved 4 pcm0: sndbuf_setmap 3e789000, 4000; 0xed2a8000 -> 3e789000 pcm0: sndbuf_setmap 3e782000, 4000; 0xed2ac000 -> 3e782000 acpi_tz0: <Thermal Zone> on acpi0 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x66,0x62,0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: the aux port is not functioning (-1). ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 11: ioport 0xbc00 alloc failed vt: vt0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xcf800-0xcffff,0xcf000-0xcf7ff,0xc0000-0xcefff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x801 0x801 0x801 0x801 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding NEW_UNRHDR 0-ffff -> 0xc251d0c0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x801 0x801 0x801 0x801 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 2790711440 Hz quality 800 Timecounters tick every 1.000 msec pflog0: bpf attached lo0: bpf attached NEW_UNRHDR 0-ffffff -> 0xc2514880 acpi_acad0: acline initialization start acpi_acad0: On Line acpi_cmbat0: battery initialization start acpi_acad0: acline initialization done, tried 1 times ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata0-master: setting PIO4 on Intel ICH4 chip ata0-master: setting UDMA33 on Intel ICH4 chip acd0: <SAMSUNG CDRW/DVD SN-324S/U303> CDRW drive at ata0 as master acd0: read 861KB/s (4126KB/s) write 172KB/s (4134KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata1-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata1-master: setting PIO4 on Intel ICH4 chip ata1-master: setting UDMA100 on Intel ICH4 chip ad2: <IC25N040ATCS05-0/CS4OA63A> ATA-5 disk at ata1-master ad2: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B ad2: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad2 acpi_cmbat0: battery initialization done, tried 1 times ar: FreeBSD check1 failed pcm0: measured ac97 link rate at 48003 Hz, will use 48000 Hz (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error (probe3:ata1:0:1:0): error 22 (probe3:ata1:0:1:0): Unretryable Error (probe3:ata1:0:1:0): error 22 (probe3:ata1:0:1:0): Unretryable Error (probe2:ata1:0:0:0): error 22 (probe2:ata1:0:0:0): Unretryable Error (probe2:ata1:0:0:0): error 22 (probe2:ata1:0:0:0): Unretryable Error (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe0:ata0:0:0:0): error 6 (probe0:ata0:0:0:0): Unretryable Error (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe4:sbp0:0:0:0): error 22 (probe4:sbp0:0:0:0): Unretryable Error (probe6:sbp0:0:2:0): error 22 (probe6:sbp0:0:2:0): Unretryable Error (probe7:sbp0:0:3:0): error 22 (probe7:sbp0:0:3:0): Unretryable Error (probe9:sbp0:0:5:0): error 22 (probe9:sbp0:0:5:0): Unretryable Error(probe10:sbp0:0:6:0): Unretryable Error (probe5:sbp0:0:1:0): error 22 (probe5:sbp0:0:1:0): Unretryable Error (probe8:sbp0:0:4:0): error 22 (probe8:sbp0:0:4:0): Unretryable Error pass0 at ata0 bus 0 target 0 lun 0 pass0: <SAMSUNG CDRW/DVD SN-324S U303> Removable CD-ROM SCSI-0 device pass0: 33.000MB/s transfers GEOM: new disk cd0 (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error cd0 at ata0 bus 0 target 0 lun 0 cd0: <SAMSUNG CDRW/DVD SN-324S U303> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error Trying to mount root from ufs:/dev/ad2s1a start_init: trying /sbin/init Pre-seeding PRNG: kickstart . Loading configuration files. Entropy harvesting: interrupts ethernet point_to_point kickstart . swapon: adding /dev/ad2s1b as swap device Starting file system checks: /dev/ad2s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad2s1a: clean, 735953 free (897 frags, 91882 blocks, 0.1% fragmentation) /dev/ad2s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad2s1f: clean, 4149857 free (169017 frags, 497605 blocks, 1.1% fragmentation) /dev/ad2s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad2s1d: clean, 1970503 free (2199 frags, 246038 blocks, 0.1% fragmentation) /dev/ad2s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad2s1e: clean, 126628 free (132 frags, 15812 blocks, 0.1% fragmentation) Linux ELF exec handler installed linprocfs registered Setting hostname: portatile.fastwebnet.it. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 Starting dhclient. bfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> inet6 fe80::20b:dbff:fe18:b59c%bfe0 prefixlen 64 scopeid 0x1 inet 1.255.90.63 netmask 0xfffff800 broadcast 255.255.255.255 ether 00:0b:db:18:b5:9c media: Ethernet autoselect (100baseTX <full-duplex>) status: active Additional routing options: . Starting devd. hw.acpi.cpu.cx_lowest: C1 -> C1 Mounting NFS file systems: . Creating and/or trimming log files: . Starting syslogd. Mar 11 07:37:34 portatile syslogd: kernel boot file is /boot/kernel/kernel NFS access cache time=2 ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/compat/pkg a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout Enabling pflogd . pflog0: promiscuous mode enabled Mar 11 07:37:35 portatile kernel: pflog0: promiscuous mode enabled Starting usbd. Starting local daemons: . Updating motd . Configuring syscons: keyrate font8x16 font8x14 font8x8 blanktime screensaver splash: image decoder found: daemon_saver allscreens . Starting sshd. Initial i386 initialization: . Additional ABI support: linux . Starting cron. Local package initialization: pgsql setenv: not found Starting dictd. postfix/postfix-script: starting the Postfix mail system sshd Mar 11 07:37:44 portatile sshd[623]: error: Bind to port 22 on 0.0.0.0 failed: Address already in use. Mar 11 07:37:44 portatile sshd[623]: fatal: Cannot bind any address. . Additional TCP options: . Starting default moused: moused: unable to open /dev/psm0: No such file or directory \^[[=0A \^[[=7F \^[[=0G \^[[=0H \^[[=7I vidcontrol: showing the mouse : Invalid argument \^[[=0A \^[[=7F \^[[=0G \^[[=0H \^[[=7I vidcontrol: showing the mouse : Invalid argument \^[[=0A \^[[=7F \^[[=0G \^[[=0H \^[[=7I vidcontrol: showing the mouse : Invalid argument \^[[=0A \^[[=7F \^[[=0G \^[[=0H \^[[=7I vidcontrol: showing the mouse : Invalid argument \^[[=0A \^[[=7F \^[[=0G \^[[=0H \^[[=7I vidcontrol: showing the mouse : Invalid argument \^[[=0A \^[[=7F \^[[=0G \^[[=0H \^[[=7I vidcontrol: showing the mouse : Invalid argument \^[[=0A \^[[=7F \^[[=0G \^[[=0H \^[[=7I vidcontrol: showing the mouse : Invalid argument \^[[=0A \^[[=7F \^[[=0G \^[[=0H \^[[=7I vidcontrol: showing the mouse : Invalid argument \^[[=0A \^[[=7F \^[[=0G \^[[=0H \^[[=7I vidcontrol: showing the mouse : Invalid argument \^[[=0A \^[[=7F \^[[=0G \^[[=0H \^[[=7I vidcontrol: showing the mouse : Invalid argument \^[[=0A \^[[=7F \^[[=0G \^[[=0H showing the mouse : Invalid argument \^[[=0A \^[[=7F \^[[=0G \^[[=0H \^[[=7I vidcontrol: showing the mouse : Invalid argument \^[[=0A \^[[=7F \^[[=0G \^[[=0H \^[[=7I vidcontrol: showing the mouse : Invalid argument \^[[=0A \^[[=7F \^[[=0G \^[[=0H \^[[=7I vidcontrol: showing the mouse : Invalid argument \^[[=0A \^[[=7F \^[[=0G \^[[=0H \^[[=7I vidcontrol: showing the mouse : Invalid argument . Starting background file system checks in 60 seconds. Fri Mar 11 07:37:44 CET 2005 Mar 11 07:37:48 portatile login: chflags(/dev/#C:227:0x0): No such file or directory Mar 11 07:37:48 portatile login: chown(/dev/#C:227:0x0): No such file or directory \^[[=7I vidcontrol: (probe10:sbp0:0:6:0): error 22Received on Fri Mar 11 2005 - 06:48:56 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:29 UTC