filippo.forti_at_fastwebnet.it wrote: > Hello, > after updating three days ago(both the bios and FreeBSD), my mouse > stopped working. Under linux the mouse seems to work whereas the keyboard > doesn't. I'm running with acpi enabled, vesa restore patch, vidcontrol & > syscons patch (which do not work at the moment). The computer is a Dell > Inspiron 5100 with bios version A32. > No help here but FWIF: I have the same (Dell 5100, synaptics touchpad, and A32 bios). I am running 5.4-PRERELEASE, and all is well. If you don't have to have -current you might try -stable Usually if you got -current you need/want it, so as I said... probably no help. Just thought I'd mention it. > > Thanks for your help, > Filippo > > Here comes the dmesg: > > > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 6.0-CURRENT #0: Fri Mar 10 09:02:31 CET 2006 > root_at_portatile.fastwebnet.it:/usr/obj/usr/src/sys/PORTATILE > WARNING: WITNESS option enabled, expect reduced performance. > Preloaded elf kernel "/boot/kernel/kernel" at 0xc0bdf000. > Preloaded elf module "/boot/kernel/pf.ko" at 0xc0bdf158. > Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0bdf200. > Preloaded elf module "/boot/kernel/sound.ko" at 0xc0bdf2ac. > Preloaded elf module "/boot/kernel/if_ath.ko" at 0xc0bdf358. > Preloaded elf module "/boot/kernel/ath_hal.ko" at 0xc0bdf404. > Preloaded elf module "/boot/kernel/ath_rate.ko" at 0xc0bdf4b0. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0bdf560. > Calibrating clock(s) ... i8254 clock: 1193183 Hz > CLK_USE_I8254_CALIBRATION not specified - using default frequency > Timecounter "i8254" frequency 1193182 Hz quality 0 > Calibrating TSC clock ... TSC clock: 2790711440 Hz > CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2790.71-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 > Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > real memory = 1073516544 (1023 MB) > Physical memory chunk(s): > 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) > 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) > 0x0000000000c25000 - 0x000000003ed99fff, 1041715200 bytes (254325 pages) > avail memory = 1041678336 (993 MB) > bios32: Found BIOS32 Service Directory header at 0xc00ffe80 > bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 > pcibios: PCI BIOS entry at 0xf0000+0xcfae > pnpbios: Found PnP BIOS data at 0xc00fe2d0 > pnpbios: Entry = f0000:e2f4 Rev = 1.0 > pnpbios: Event flag at 4b4 > Other BIOS signatures found: > wlan: <802.11 Link Layer> > ath_rate: <Atsushi Onoe's rate control algorithm> > nfslock: pseudo-device > io: <I/O> > NEW_UNRHDR 0-ffffff -> 0xc22c8b00 > mem: <memory> > Pentium Pro MTRR support enabled > VESA: information block > 56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00 > 00 01 00 02 00 01 19 01 00 01 2f 01 00 01 34 01 > 00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01 > 94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01 > VESA: 60 mode(s) found > VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc0a13ac2 (1000022) > VESA: ATI MOBILITY RADEON 7500 > VESA: ATI Technologies Inc. M7 01.00 > null: <null device, zero device> > random: <entropy source, Software, Yarrow> > ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413) > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <DELL CPi R > on motherboard > acpi0: [MPSAFE] > pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014 > pci_open(1a): mode1res=0x80000000 (0x80000000) > pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25608086) > pcibios: BIOS version 2.10 > Found $PIR table, 10 entries at 0xc00fcbb0 > PCI-Only Interrupts: none > Location Bus Device Pin Link IRQs > embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15 > embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15 > embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15 > embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 14 15 > embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15 > embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15 > embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15 > embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15 > embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15 > embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15 > embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15 > embedded 1 0 A 0x65 3 4 5 6 7 9 10 11 12 14 15 > embedded 2 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15 > embedded 2 4 A 0x60 3 4 5 6 7 9 10 11 12 14 15 > embedded 2 4 B 0x60 none > embedded 2 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15 > embedded 2 2 B 0x63 3 4 5 6 7 9 10 11 12 14 15 > embedded 8 0 A 0x62 3 4 5 6 7 9 10 11 12 14 15 > embedded 8 0 B 0x63 3 4 5 6 7 9 10 11 12 14 15 > embedded 8 1 A 0x62 3 4 5 6 7 9 10 11 12 14 15 > embedded 8 1 B 0x63 3 4 5 6 7 9 10 11 12 14 15 > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: bus 0 dev 31 func 0 > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: bus 0 dev 31 func 0 > atpic: Programming IRQ9 as level/low > ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > acpi_throttle0: <ACPI CPU Throttling> on cpu0 > acpi_throttle0: P_CNT from P_BLK 0x8e0 > acpi_acad0: <AC Adapter> on acpi0 > acpi_cmbat0: <Control Method Battery> on acpi0 > acpi_lid0: <Control Method Lid Switch> on acpi0 > acpi_button0: <Power Button> on acpi0 > acpi_button1: <Sleep Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 > pci_link0: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 11 N 0 9 10 11 > pci_link0: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 11 N 0 9 10 11 > pci_link0: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 9 10 11 > pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0 > pci_link1: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 11 N 0 5 7 > pci_link1: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 > pci_link1: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 > pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0 > pci_link2: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 11 N 0 9 10 11 > pci_link2: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 11 N 0 9 10 11 > pci_link2: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 9 10 11 > pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0 > pci_link3: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 11 N 0 5 7 9 10 11 > pci_link3: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 11 N 0 5 7 9 10 11 > pci_link3: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 5 7 9 10 11 > pci_link4: <ACPI PCI Link LNKH> irq 11 on acpi0 > pci_link4: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 > pci_link4: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 > pci_link4: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 > pci0: <ACPI PCI bus> on pcib0 > pci0: physical bus=0 > map[10]: type 3, range 32, base e0000000, size 27, enabled > found-> vendor=0x8086, dev=0x2560, revid=0x02 > bus=0, slot=0, func=0 > class=06-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x8086, dev=0x2561, revid=0x02 > bus=0, slot=1, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) > map[20]: type 4, range 32, base 0000bf80, size 5, enabled > pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA:0) > pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LNKA > found-> vendor=0x8086, dev=0x24c2, revid=0x02 > bus=0, slot=29, func=0 > class=0c-03-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > map[20]: type 4, range 32, base 0000bf40, size 5, enabled > pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LNKD:0) > pcib0: slot 29 INTB routed to irq 11 via \\_SB_.PCI0.LNKD > found-> vendor=0x8086, dev=0x24c4, revid=0x02 > bus=0, slot=29, func=1 > class=0c-03-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=11 > map[20]: type 4, range 32, base 0000bf20, size 5, enabled > pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LNKC:0) > pcib0: slot 29 INTC routed to irq 11 via \\_SB_.PCI0.LNKC > found-> vendor=0x8086, dev=0x24c7, revid=0x02 > bus=0, slot=29, func=2 > class=0c-03-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=c, irq=11 > map[10]: type 1, range 32, base f4fffc00, size 10, enabled > pcib0: matched entry for 0.29.INTD (src \\_SB_.PCI0.LNKH:0) > pcib0: slot 29 INTD routed to irq 11 via \\_SB_.PCI0.LNKH > found-> vendor=0x8086, dev=0x24cd, revid=0x02 > bus=0, slot=29, func=7 > class=0c-03-20, hdrtype=0x00, mfdev=0 > cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=d, irq=11 > powerspec 2 supports D0 D3 current D0 > found-> vendor=0x8086, dev=0x244e, revid=0x82 > bus=0, slot=30, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) > found-> vendor=0x8086, dev=0x24c0, revid=0x02 > bus=0, slot=31, func=0 > class=06-01-00, hdrtype=0x00, mfdev=1 > cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > map[20]: type 4, range 32, base 0000bfa0, size 4, enabled > found-> vendor=0x8086, dev=0x24cb, revid=0x02 > bus=0, slot=31, func=1 > class=01-01-8a, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=255 > map[10]: type 4, range 32, base 0000b800, size 8, enabled > map[14]: type 4, range 32, base 0000bc40, size 6, enabled > map[18]: type 1, range 32, base f4fff800, size 9, enabled > map[1c]: type 1, range 32, base f4fff400, size 8, enabled > pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) > pci_link1: Picked IRQ 9 with weight 0 > pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB > found-> vendor=0x8086, dev=0x24c5, revid=0x02 > bus=0, slot=31, func=5 > class=04-01-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=9 > powerspec 2 supports D0 D3 current D0 > agp0: <Intel 82845G host to AGP bridge> mem 0xe0000000-0xe7ffffff at device > 0.0 on pci0 > agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe0000000 > agp0: allocating GATT for aperture of size 128M > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pcib1: secondary bus 1 > pcib1: subordinate bus 1 > pcib1: I/O decode 0xc000-0xcfff > pcib1: memory decode 0xfc000000-0xfdffffff > pcib1: prefetched decode 0xe8000000-0xefffffff > pci_link5: <ACPI PCI Link LNKE> irq 11 on acpi0 > pci_link5: Links after initial probe: > Index IRQ Rtd Ref IRQs > 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 > pci_link5: Links after initial validation: > Index IRQ Rtd Ref IRQs > 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 > pci_link5: Links after disable: > Index IRQ Rtd Ref IRQs > 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 > pci1: <ACPI PCI bus> on pcib1 > pci1: physical bus=1 > map[10]: type 3, range 32, base e8000000, size 27, enabled > pcib1: (null) requested memory range 0xe8000000-0xefffffff: good > map[14]: type 4, range 32, base 0000c000, size 8, enabled > pcib1: (null) requested I/O range 0xc000-0xc0ff: in range > map[18]: type 1, range 32, base fcff0000, size 16, enabled > pcib1: (null) requested memory range 0xfcff0000-0xfcffffff: good > pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LNKE:0) > pcib1: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKE > found-> vendor=0x1002, dev=0x4c57, revid=0x00 > bus=1, slot=0, func=0 > class=03-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x01a7, statreg=0x02b0, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D1 D2 D3 current D0 > pci1: <display, VGA> at device 0.0 (no driver attached) > uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq > 11 at device 29.0 on pci0 > uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80 > uhci0: [GIANT-LOCKED] > usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq > 11 at device 29.1 on pci0 > uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf40 > uhci1: [GIANT-LOCKED] > usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq > 11 at device 29.2 on pci0 > uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20 > uhci2: [GIANT-LOCKED] > usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf4fffc00-0xf4ffffff irq > 11 at device 29.7 on pci0 > ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf4fffc00 > ehci0: [GIANT-LOCKED] > ehci_pci_attach: companion usb0 > ehci_pci_attach: companion usb1 > ehci_pci_attach: companion usb2 > usb3: EHCI version 1.0 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2 > usb3: <EHCI (generic) USB 2.0 controller> on ehci0 > usb3: USB revision 2.0 > uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub3: single transaction translator > uhub3: 6 ports with 6 removable, self powered > pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pcib2: secondary bus 2 > pcib2: subordinate bus 2 > pcib2: I/O decode 0xd000-0xefff > pcib2: memory decode 0xf6000000-0xfbffffff > pcib2: prefetched decode 0xfff00000-0xfffff > pcib2: Subtractively decoded bridge. > pci2: <ACPI PCI bus> on pcib2 > pci2: physical bus=2 > map[10]: type 1, range 32, base faffe000, size 13, enabled > pcib2: (null) requested memory range 0xfaffe000-0xfaffffff: good > pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKB:0) > pcib2: slot 1 INTA routed to irq 9 via \\_SB_.PCI0.LNKB > found-> vendor=0x14e4, dev=0x4401, revid=0x01 > bus=2, slot=1, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=9 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type 1, range 32, base 00000000, size 12, memory disabled > found-> vendor=0x104c, dev=0xac44, revid=0x02 > bus=2, slot=4, func=0 > class=06-07-00, hdrtype=0x02, mfdev=1 > cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 > ns) > intpin=a, irq=255 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type 1, range 32, base faffd800, size 11, enabled > pcib2: (null) requested memory range 0xfaffd800-0xfaffdfff: good > map[14]: type 1, range 32, base faff8000, size 14, enabled > pcib2: (null) requested memory range 0xfaff8000-0xfaffbfff: good > pcib2: matched entry for 2.4.INTA (src \\_SB_.PCI0.LNKA:0) > pcib2: slot 4 INTA routed to irq 11 via \\_SB_.PCI0.LNKA > found-> vendor=0x104c, dev=0x8029, revid=0x00 > bus=2, slot=4, func=1 > class=0c-00-10, hdrtype=0x00, mfdev=1 > cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords) > lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D1 D2 D3 current D0 > bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xfaffe000-0xfaffffff irq 9 at > device 1.0 on pci2 > bfe0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfaffe000 > miibus0: <MII bus> on bfe0 > bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0 > bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > bfe0: bpf attached > bfe0: Ethernet address: 00:0b:db:18:b5:9c > bfe0: [MPSAFE] > cbb0: <TI4510 PCI-CardBus Bridge> at device 4.0 on pci2 > pcib2: cbb0 requested memory range 0xf6000000-0xfbffffff: good > cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf6000000 > cardbus0: <CardBus bus> on cbb0 > pccard0: <16-bit PCCard bus> on cbb0 > pcib2: matched entry for 2.4.INTA (src \\_SB_.PCI0.LNKA:0) > pcib2: slot 4 INTA routed to irq 11 via \\_SB_.PCI0.LNKA > cbb0: [MPSAFE] > cbb0: PCI Configuration space: > 0x00: 0xac44104c 0x02100007 0x06070002 0x00822008 > 0x10: 0xf6000000 0x020000a0 0x20040302 0xfffff000 > 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc > 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b > 0x40: 0x01491028 0x00000001 0x00000000 0x00000000 > 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 > 0x80: 0x28405061 0x00000000 0x001f0000 0x00001002 > 0x90: 0x606482c0 0x00000000 0x00000000 0x00000000 > 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 > 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 > 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 > fwohci0: vendor=104c, dev=8029 > fwohci0: vendor=104c, dev=8029 > fwohci0: <1394 Open Host Controller Interface> mem 0xfaff8000-0xfaffbfff,0xfaffd800-0xfaffdfff > irq 11 at device 4.1 on pci2 > fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfaffd800 > fwohci0: [MPSAFE] > fwohci0: OHCI version 1.10 (ROM=0) > fwohci0: No. of Isochronous channels is 4. > fwohci0: EUI64 38:4f:c0:00:02:dc:d4:10 > fwohci0: Phy 1394a available S400, 2 ports. > fwohci0: Link S400, max_rec 2048 bytes. > firewire0: <IEEE1394(FireWire) bus> on fwohci0 > fwe0: <Ethernet over FireWire> on firewire0 > if_fwe0: Fake Ethernet address: 3a:4f:c0:dc:d4:10 > fwe0: bpf attached > fwe0: Ethernet address: 3a:4f:c0:dc:d4:10 > fwe0: if_start running deferred for Giant > sbp0: <SBP-2/SCSI over FireWire> on firewire0 > fwohci0: Initiate bus reset > fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode > firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) > firewire0: bus manager 0 (me) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH4 UDMA100 controller> port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 > at device 31.1 on pci0 > atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 > ata0: channel #0 on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 > atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 > ata0: reset tp1 mask=03 ostat0=50 ostat1=01 > ata0-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb > ata0-slave: stat=0x01 err=0x04 lsb=0x00 msb=0x00 > ata0: reset tp2 stat0=10 stat1=01 devices=0x4<ATAPI_MASTER> > ata0: [MPSAFE] > ata1: channel #1 on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 > atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 > ata1: reset tp1 mask=03 ostat0=50 ostat1=00 > ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 > ata1-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 > ata1: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> > ata1: [MPSAFE] > pcm0: <Intel ICH4 (82801DB)> port 0xbc40-0xbc7f,0xb800-0xb8ff mem 0xf4fff400-0xf4fff4ff,0xf4fff800-0xf4fff9ff > irq 9 at device 31.5 on pci0 > pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xb800 > pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xbc40 > pcm0: [GIANT-LOCKED] > pcm0: <SigmaTel STAC9750/51 AC97 Codec (id = 0x83847650)> > pcm0: Codec features headphone, 20 bit DAC, 20 bit ADC, 5 bit master volume, > SigmaTel 3D Enhancement > pcm0: Primary codec extended features variable rate PCM, reserved 1, AMAP, > reserved 4 > pcm0: sndbuf_setmap 3e789000, 4000; 0xed2a8000 -> 3e789000 > pcm0: sndbuf_setmap 3e782000, 4000; 0xed2ac000 -> 3e782000 > acpi_tz0: <Thermal Zone> on acpi0 > psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x66,0x62,0x64,0x60 irq 1 on > acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > atkbd: the current kbd controller command byte 0065 > atkbd: keyboard ID 0x41ab (2) > kbd0 at atkbd0 > kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 > atkbd0: [GIANT-LOCKED] > psm0: current command byte:0065 > psm0: the aux port is not functioning (-1). > ata: ata0 already exists; skipping it > ata: ata1 already exists; skipping it > atkbdc: atkbdc0 already exists; skipping it > pnp_identify: Trying Read_Port at 203 > pnp_identify: Trying Read_Port at 243 > pnp_identify: Trying Read_Port at 283 > pnp_identify: Trying Read_Port at 2c3 > pnp_identify: Trying Read_Port at 303 > pnp_identify: Trying Read_Port at 343 > pnp_identify: Trying Read_Port at 383 > pnp_identify: Trying Read_Port at 3c3 > PNP Identify complete > ex_isa_identify() > unknown: status reg test failed ff > unknown: status reg test failed ff > unknown: status reg test failed ff > unknown: status reg test failed ff > unknown: status reg test failed ff > unknown: status reg test failed ff > ahc_isa_probe 11: ioport 0xbc00 alloc failed > vt: vt0 already exists; skipping it > sc: sc0 already exists; skipping it > vga: vga0 already exists; skipping it > isa_probe_children: disabling PnP devices > isa_probe_children: probing non-PnP devices > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem 0xcf800-0xcffff,0xcf000-0xcf7ff,0xc0000-0xcefff > on isa0 > adv0: not probed (disabled) > aha0: not probed (disabled) > aic0: not probed (disabled) > bt0: not probed (disabled) > cs0: not probed (disabled) > ed0: not probed (disabled) > fdc0 failed to probe at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 > fe0: not probed (disabled) > ie0: not probed (disabled) > lnc0: not probed (disabled) > ppc0: parallel port not found. > ppc0: <Parallel port> failed to probe at irq 7 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: irq maps: 0x801 0x801 0x801 0x801 > sio0: probe failed test(s): 0 1 2 4 6 7 9 > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 8250 or not responding > NEW_UNRHDR 0-ffff -> 0xc251d0c0 > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: irq maps: 0x801 0x801 0x801 0x801 > sio1: probe failed test(s): 0 1 2 4 6 7 9 > sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 > sio2: not probed (disabled) > sio3: not probed (disabled) > sn0: not probed (disabled) > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > vt0: not probed (disabled) > isa_probe_children: probing PnP devices > Device configuration finished. > procfs registered > Timecounter "TSC" frequency 2790711440 Hz quality 800 > Timecounters tick every 1.000 msec > pflog0: bpf attached > lo0: bpf attached > NEW_UNRHDR 0-ffffff -> 0xc2514880 > acpi_acad0: acline initialization start > acpi_acad0: On Line > acpi_cmbat0: battery initialization start > acpi_acad0: acline initialization done, tried 1 times > ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin > ata0-master: setting PIO4 on Intel ICH4 chip > ata0-master: setting UDMA33 on Intel ICH4 chip > acd0: <SAMSUNG CDRW/DVD SN-324S/U303> CDRW drive at ata0 as master > acd0: read 861KB/s (4126KB/s) write 172KB/s (4134KB/s), 2048KB buffer, UDMA33 > acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet > acd0: Writes: CDR, CDRW, test write, burnproof > acd0: Audio: play, 256 volume levels > acd0: Mechanism: ejectable tray, unlocked > acd0: Medium: no/blank disc > ata1-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin > ata1-master: setting PIO4 on Intel ICH4 chip > ata1-master: setting UDMA100 on Intel ICH4 chip > ad2: <IC25N040ATCS05-0/CS4OA63A> ATA-5 disk at ata1-master > ad2: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B > ad2: 16 secs/int, 1 depth queue, UDMA100 > GEOM: new disk ad2 > acpi_cmbat0: battery initialization done, tried 1 times > ar: FreeBSD check1 failed > pcm0: measured ac97 link rate at 48003 Hz, will use 48000 Hz > (probe1:ata0:0:1:0): error 22 > (probe1:ata0:0:1:0): Unretryable Error > (probe1:ata0:0:1:0): error 22 > (probe1:ata0:0:1:0): Unretryable Error > (probe3:ata1:0:1:0): error 22 > (probe3:ata1:0:1:0): Unretryable Error > (probe3:ata1:0:1:0): error 22 > (probe3:ata1:0:1:0): Unretryable Error > (probe2:ata1:0:0:0): error 22 > (probe2:ata1:0:0:0): Unretryable Error > (probe2:ata1:0:0:0): error 22 > (probe2:ata1:0:0:0): Unretryable Error > (probe0:ata0:0:0:0): error 22 > (probe0:ata0:0:0:0): Unretryable Error > (probe0:ata0:0:0:0): error 6 > (probe0:ata0:0:0:0): Unretryable Error > (probe0:ata0:0:0:0): error 22 > (probe0:ata0:0:0:0): Unretryable Error > (probe4:sbp0:0:0:0): error 22 > (probe4:sbp0:0:0:0): Unretryable Error > (probe6:sbp0:0:2:0): error 22 > (probe6:sbp0:0:2:0): Unretryable Error > (probe7:sbp0:0:3:0): error 22 > (probe7:sbp0:0:3:0): Unretryable Error > (probe9:sbp0:0:5:0): error 22 > (probe9:sbp0:0:5:0): Unretryable Error(probe10:sbp0:0:6:0): Unretryable Error > (probe5:sbp0:0:1:0): error 22 > (probe5:sbp0:0:1:0): Unretryable Error > (probe8:sbp0:0:4:0): error 22 > (probe8:sbp0:0:4:0): Unretryable Error > pass0 at ata0 bus 0 target 0 lun 0 > pass0: <SAMSUNG CDRW/DVD SN-324S U303> Removable CD-ROM SCSI-0 device > pass0: 33.000MB/s transfers > GEOM: new disk cd0 > (cd0:ata0:0:0:0): error 6 > (cd0:ata0:0:0:0): Unretryable Error > cd0 at ata0 bus 0 target 0 lun 0 > cd0: <SAMSUNG CDRW/DVD SN-324S U303> Removable CD-ROM SCSI-0 device > cd0: 33.000MB/s transfers > cd0: Attempt to query device size failed: NOT READY, Medium not present - > tray closed > (cd0:ata0:0:0:0): error 6 > (cd0:ata0:0:0:0): Unretryable Error > (cd0:ata0:0:0:0): error 6 > (cd0:ata0:0:0:0): Unretryable Error > (cd0:ata0:0:0:0): error 6 > (cd0:ata0:0:0:0): Unretryable Error > Trying to mount root from ufs:/dev/ad2s1a > start_init: trying /sbin/init > Pre-seeding PRNG: > kickstart > . > Loading configuration files. > Entropy harvesting: > interrupts > ethernet > point_to_point > kickstart > . > swapon: adding /dev/ad2s1b as swap device > Starting file system checks: > /dev/ad2s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS > /dev/ad2s1a: clean, 735953 free (897 frags, 91882 blocks, 0.1% fragmentation) > /dev/ad2s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS > /dev/ad2s1f: clean, 4149857 free (169017 frags, 497605 blocks, 1.1% fragmentation) > /dev/ad2s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS > /dev/ad2s1d: clean, 1970503 free (2199 frags, 246038 blocks, 0.1% fragmentation) > /dev/ad2s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS > /dev/ad2s1e: clean, 126628 free (132 frags, 15812 blocks, 0.1% fragmentation) > Linux ELF exec handler installed > linprocfs registered > Setting hostname: portatile.fastwebnet.it. > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > inet 127.0.0.1 netmask 0xff000000 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 > Starting dhclient. > bfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > options=8<VLAN_MTU> > inet6 fe80::20b:dbff:fe18:b59c%bfe0 prefixlen 64 scopeid 0x1 > inet 1.255.90.63 netmask 0xfffff800 broadcast 255.255.255.255 > ether 00:0b:db:18:b5:9c > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > Additional routing options: > . > Starting devd. > hw.acpi.cpu.cx_lowest: > C1 > -> > C1 > > Mounting NFS file systems: > . > Creating and/or trimming log files: > . > Starting syslogd. > Mar 11 07:37:34 portatile syslogd: kernel boot file is /boot/kernel/kernel > NFS access cache time=2 > ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib > /usr/local/lib/compat/pkg > a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout > Enabling pflogd > . > pflog0: promiscuous mode enabled > Mar 11 07:37:35 portatile kernel: pflog0: promiscuous mode enabled > Starting usbd. > Starting local daemons: > . > Updating motd > . > Configuring syscons: > keyrate > font8x16 > font8x14 > font8x8 > blanktime > screensaver > splash: image decoder found: daemon_saver > allscreens > . > Starting sshd. > Initial i386 initialization: > . > Additional ABI support: > linux > . > Starting cron. > Local package initialization: > pgsql > setenv: not found > Starting dictd. > postfix/postfix-script: starting the Postfix mail system sshd > Mar 11 07:37:44 portatile sshd[623]: error: Bind to port 22 on 0.0.0.0 failed: > Address already in use. > Mar 11 07:37:44 portatile sshd[623]: fatal: Cannot bind any address. > . > Additional TCP options: > . > Starting default moused: > moused: > unable to open /dev/psm0: No such file or directory > > \^[[=0A > \^[[=7F > \^[[=0G > \^[[=0H > \^[[=7I > vidcontrol: > showing the mouse > : > > > Invalid argument > \^[[=0A > \^[[=7F > \^[[=0G > \^[[=0H > \^[[=7I > vidcontrol: > showing the mouse > : > > > Invalid argument > \^[[=0A > \^[[=7F > \^[[=0G > \^[[=0H > \^[[=7I > vidcontrol: > showing the mouse > : > > > Invalid argument > \^[[=0A > \^[[=7F > \^[[=0G > \^[[=0H > \^[[=7I > vidcontrol: > showing the mouse > : > > > Invalid argument > \^[[=0A > \^[[=7F > \^[[=0G > \^[[=0H > \^[[=7I > vidcontrol: > showing the mouse : > > > Invalid argument > \^[[=0A > \^[[=7F > \^[[=0G > \^[[=0H > \^[[=7I > vidcontrol: > showing the mouse > : > > > Invalid argument > \^[[=0A > \^[[=7F > \^[[=0G > \^[[=0H > \^[[=7I > vidcontrol: > showing the mouse > : > > > Invalid argument > \^[[=0A > \^[[=7F > \^[[=0G > \^[[=0H > \^[[=7I > vidcontrol: > showing the mouse > : > > > Invalid argument > \^[[=0A > \^[[=7F > \^[[=0G > \^[[=0H > \^[[=7I > vidcontrol: > showing the mouse > : > > > Invalid argument > \^[[=0A > \^[[=7F > \^[[=0G > \^[[=0H > \^[[=7I > vidcontrol: > showing the mouse > : > > > Invalid argument > \^[[=0A > \^[[=7F > \^[[=0G > \^[[=0H showing the mouse > : > > > Invalid argument > \^[[=0A > \^[[=7F > \^[[=0G > \^[[=0H > \^[[=7I > vidcontrol: > showing the mouse > : > > > Invalid argument > \^[[=0A > \^[[=7F > \^[[=0G > \^[[=0H > \^[[=7I > vidcontrol: > showing the mouse > : > > > Invalid argument > \^[[=0A > \^[[=7F > \^[[=0G > \^[[=0H > \^[[=7I > vidcontrol: > showing the mouse > : > > > Invalid argument > \^[[=0A > \^[[=7F > \^[[=0G > \^[[=0H > \^[[=7I > vidcontrol: > showing the mouse > : > > > Invalid argument > . > Starting background file system checks in 60 seconds. > > Fri Mar 11 07:37:44 CET 2005 > Mar 11 07:37:48 portatile login: chflags(/dev/#C:227:0x0): No such file > or directory > Mar 11 07:37:48 portatile login: chown(/dev/#C:227:0x0): No such file or > directory > > \^[[=7I > vidcontrol: > > > > (probe10:sbp0:0:6:0): error 22 > > > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" > -- Regards, EricReceived on Fri Mar 11 2005 - 19:12:31 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:29 UTC