Re: strange problems ! with 5.4RC's

On Tue, 3 May 2005, Nikolay Kalev wrote:

> I have some strange problems lately. This issue came when i started to
> use 5.4RC's. For some reason after working 1-2days on my laptop without
> reboot or something else my touchpad was barly usable. The effect was
> like someone else was moving my pointer back to it;s possition like it
> was stuck on that spot. This apeared twice from PRERELEASE to RC4
> testing on my laptop, after reboot everything comes back to normal with
> no such effects.
> Could this be from a window manager or X ?

It could be from the Synaptics improvements -- there's a flag to disable
them. Check the manpage.


> Here is a dmesg from my hardware :
> ---------------------------------------------------------------------------------------------------
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD 5.4-RC4 #0: Mon May  2 02:23:48 EEST 2005
>     root_at_lapi:/usr/obj/usr/src/sys/LAPI
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Celeron(R) CPU 2.40GHz (2392.96-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
>
> Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXS
> R,SSE,SSE2,SS,HTT,TM,PBE>
> real memory  = 393740288 (375 MB)
> avail memory = 375463936 (358 MB)
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <PTLTD   RSDT> on motherboard
> acpi0: Power Button (fixed)
> acpi_ec0: <Embedded Controller: GPE 0x18> port 0x66,0x62 on acpi0
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> cpu0: <ACPI CPU (2 Cx states)> on acpi0
> acpi_cmbat0: <Control Method Battery> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> acpi_button0: <Power Button> on acpi0
> acpi_button1: <Sleep Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> acpi_video0: <ACPI video extension> mem
> 0x80000000-0x8007ffff,0x88000000-0x8fffffff irq 10 at device 2.0 on pci0
> uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f
> irq 10 at device 29.0 on pci0
> usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f
> irq 11 at device 29.1 on pci0
> usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f
> irq 5 at device 29.2 on pci0
> usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> pci0: <serial bus, USB> at device 29.7 (no driver attached)
> pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci2: <ACPI PCI bus> on pcib1
> cbb0: <RF5C475 PCI-CardBus Bridge> at device 3.0 on pci2
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0x3000-0x303f mem
> 0xd0104000-0xd0104fff irq 11 at device 8.
> 0 on pci2
> miibus0: <MII bus> on fxp0
> inphy0: <i82562ET 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp0: Ethernet address: 00:00:f0:84:fc:c7
> fwohci0: <Texas Instruments TSB43AB22/A> mem
> 0xd0100000-0xd0103fff,0xd0105000-0xd01057ff irq 10 at device 13.0 on
>  pci2
> fwohci0: OHCI version 1.10 (ROM=1)
> fwohci0: No. of Isochronous channels is 4.
> fwohci0: EUI64 00:00:f0:41:20:11:19:1c
> fwohci0: Phy 1394a available S400, 2 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> fwe0: <Ethernet over FireWire> on firewire0
> if_fwe0: Fake Ethernet address: 02:00:f0:11:19:1c
> fwe0: Ethernet address: 02:00:f0:11:19:1c
> fwe0: if_start running deferred for Giant
> sbp0: <SBP-2/SCSI over FireWire> on firewire0
> fwohci0: Initiate bus reset
> fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
> firewire0: bus manager 0 (me)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH4 UDMA100 controller> port
> 0x1860-0x186f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on
>  pci0
> ata0: channel #0 on atapci0
> ata1: channel #1 on atapci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> pcm0: <Intel ICH4 (82801DB)> port 0x18c0-0x18ff,0x1c00-0x1cff mem
> 0xd0080800-0xd00808ff,0xd0080c00-0xd0080dff irq
>  5 at device 31.5 on pci0
> pcm0: <Unknown AC97 Codec (id = 0x43525973)>
> pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
> acpi_tz0: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model IntelliMouse, device ID 3
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
> acpi0
> sio0: type 16550A
> ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq
> 1 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> orm0: <ISA Option ROMs> at iomem 0xe0000-0xe3fff,0xdc000-0xdffff on isa0
> pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounter "TSC" frequency 2392961360 Hz quality 800
> Timecounters tick every 10.000 msec
> ipfw2 initialized, divert disabled, rule-based forwarding enabled,
> default to accept, logging limited to 100 pack
> ets/entry by default
> ad0: 28615MB <TOSHIBA MK3021GAS/GA124A> [58140/16/63] at ata0-master UDMA100
> acd0: CDRW <SAMSUNG CDRW/DVD SN-324F/U200> at ata1-master PIO4
> Mounting root from ufs:/dev/ad0s1a
> Accounting enabled
> pflog0: promiscuous mode enabled
>
>
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"
>

-- 
Doug White                    |  FreeBSD: The Power to Serve
dwhite_at_gumbysoft.com          |  www.FreeBSD.org