Doug White wrote: >On Tue, 3 May 2005, Nikolay Kalev wrote: > > > >>I have some strange problems lately. This issue came when i started to >>use 5.4RC's. For some reason after working 1-2days on my laptop without >>reboot or something else my touchpad was barly usable. The effect was >>like someone else was moving my pointer back to it;s possition like it >>was stuck on that spot. This apeared twice from PRERELEASE to RC4 >>testing on my laptop, after reboot everything comes back to normal with >>no such effects. >>Could this be from a window manager or X ? >> >> > >It could be from the Synaptics improvements -- there's a flag to disable >them. Check the manpage. > > > > >>Here is a dmesg from my hardware : >>--------------------------------------------------------------------------------------------------- >>Copyright (c) 1992-2005 The FreeBSD Project. >>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved. >>FreeBSD 5.4-RC4 #0: Mon May 2 02:23:48 EEST 2005 >> root_at_lapi:/usr/obj/usr/src/sys/LAPI >>Timecounter "i8254" frequency 1193182 Hz quality 0 >>CPU: Intel(R) Celeron(R) CPU 2.40GHz (2392.96-MHz 686-class CPU) >> Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 >> >>Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXS >>R,SSE,SSE2,SS,HTT,TM,PBE> >>real memory = 393740288 (375 MB) >>avail memory = 375463936 (358 MB) >>npx0: <math processor> on motherboard >>npx0: INT 16 interface >>acpi0: <PTLTD RSDT> on motherboard >>acpi0: Power Button (fixed) >>acpi_ec0: <Embedded Controller: GPE 0x18> port 0x66,0x62 on acpi0 >>Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 >>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 >>cpu0: <ACPI CPU (2 Cx states)> on acpi0 >>acpi_cmbat0: <Control Method Battery> on acpi0 >>acpi_acad0: <AC Adapter> on acpi0 >>acpi_button0: <Power Button> on acpi0 >>acpi_button1: <Sleep Button> on acpi0 >>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >>pci0: <ACPI PCI bus> on pcib0 >>acpi_video0: <ACPI video extension> mem >>0x80000000-0x8007ffff,0x88000000-0x8fffffff irq 10 at device 2.0 on pci0 >>uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f >>irq 10 at device 29.0 on pci0 >>usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 >>usb0: USB revision 1.0 >>uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >>uhub0: 2 ports with 2 removable, self powered >>uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f >>irq 11 at device 29.1 on pci0 >>usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 >>usb1: USB revision 1.0 >>uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >>uhub1: 2 ports with 2 removable, self powered >>uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f >>irq 5 at device 29.2 on pci0 >>usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 >>usb2: USB revision 1.0 >>uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >>uhub2: 2 ports with 2 removable, self powered >>pci0: <serial bus, USB> at device 29.7 (no driver attached) >>pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 >>pci2: <ACPI PCI bus> on pcib1 >>cbb0: <RF5C475 PCI-CardBus Bridge> at device 3.0 on pci2 >>cardbus0: <CardBus bus> on cbb0 >>pccard0: <16-bit PCCard bus> on cbb0 >>fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0x3000-0x303f mem >>0xd0104000-0xd0104fff irq 11 at device 8. >>0 on pci2 >>miibus0: <MII bus> on fxp0 >>inphy0: <i82562ET 10/100 media interface> on miibus0 >>inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >>fxp0: Ethernet address: 00:00:f0:84:fc:c7 >>fwohci0: <Texas Instruments TSB43AB22/A> mem >>0xd0100000-0xd0103fff,0xd0105000-0xd01057ff irq 10 at device 13.0 on >> pci2 >>fwohci0: OHCI version 1.10 (ROM=1) >>fwohci0: No. of Isochronous channels is 4. >>fwohci0: EUI64 00:00:f0:41:20:11:19:1c >>fwohci0: Phy 1394a available S400, 2 ports. >>fwohci0: Link S400, max_rec 2048 bytes. >>firewire0: <IEEE1394(FireWire) bus> on fwohci0 >>fwe0: <Ethernet over FireWire> on firewire0 >>if_fwe0: Fake Ethernet address: 02:00:f0:11:19:1c >>fwe0: Ethernet address: 02:00:f0:11:19:1c >>fwe0: if_start running deferred for Giant >>sbp0: <SBP-2/SCSI over FireWire> on firewire0 >>fwohci0: Initiate bus reset >>fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode >>firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) >>firewire0: bus manager 0 (me) >>isab0: <PCI-ISA bridge> at device 31.0 on pci0 >>isa0: <ISA bus> on isab0 >>atapci0: <Intel ICH4 UDMA100 controller> port >>0x1860-0x186f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on >> pci0 >>ata0: channel #0 on atapci0 >>ata1: channel #1 on atapci0 >>pci0: <serial bus, SMBus> at device 31.3 (no driver attached) >>pcm0: <Intel ICH4 (82801DB)> port 0x18c0-0x18ff,0x1c00-0x1cff mem >>0xd0080800-0xd00808ff,0xd0080c00-0xd0080dff irq >> 5 at device 31.5 on pci0 >>pcm0: <Unknown AC97 Codec (id = 0x43525973)> >>pci0: <simple comms, generic modem> at device 31.6 (no driver attached) >>acpi_tz0: <Thermal Zone> on acpi0 >>atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 >>atkbd0: <AT Keyboard> irq 1 on atkbdc0 >>kbd0 at atkbd0 >>psm0: <PS/2 Mouse> irq 12 on atkbdc0 >>psm0: model IntelliMouse, device ID 3 >>sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on >>acpi0 >>sio0: type 16550A >>ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq >>1 on acpi0 >>ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode >>ppc0: FIFO with 16/16/8 bytes threshold >>ppbus0: <Parallel port bus> on ppc0 >>plip0: <PLIP network interface> on ppbus0 >>lpt0: <Printer> on ppbus0 >>lpt0: Interrupt-driven port >>ppi0: <Parallel I/O> on ppbus0 >>orm0: <ISA Option ROMs> at iomem 0xe0000-0xe3fff,0xdc000-0xdffff on isa0 >>pmtimer0 on isa0 >>sc0: <System console> at flags 0x100 on isa0 >>sc0: VGA <16 virtual consoles, flags=0x300> >>sio1: configured irq 3 not in bitmap of probed irqs 0 >>sio1: port may not be enabled >>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >>Timecounter "TSC" frequency 2392961360 Hz quality 800 >>Timecounters tick every 10.000 msec >>ipfw2 initialized, divert disabled, rule-based forwarding enabled, >>default to accept, logging limited to 100 pack >>ets/entry by default >>ad0: 28615MB <TOSHIBA MK3021GAS/GA124A> [58140/16/63] at ata0-master UDMA100 >>acd0: CDRW <SAMSUNG CDRW/DVD SN-324F/U200> at ata1-master PIO4 >>Mounting root from ufs:/dev/ad0s1a >>Accounting enabled >>pflog0: promiscuous mode enabled >> >> Thanks for the advice, it seems i don;t have synaptecs and the revision of psm.c is 1.79.2.2 . I;m tracking the RELENG_5_4 tree. The improvments are still in freebsd-current tree ? I'll continue to observe this problems and see if i can genarate it. Keep up the good work !Received on Fri May 06 2005 - 05:13:39 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:34 UTC