Christoph P. Kukulies wrote: >I still have the problem that my machine cannot be rebooted remotedly. > >Doing a reboot command or typing CTRL-ALT-DEL shuts down the machine >but it then gives: > >umount of /dev failed (BUSY) >Uptime: 2m2s > >and then nothing. The computer sits there. Motherboard is an ASROCK >if that matters. > I've had a similar problem for a while on a dual P3 Gateway branded Asus CUR-DLS motherboard but never really looked into it much. At the time I tried both with and without the ACPI module loaded; reboots are not possible. The machine hangs just after printing something like cpu0: reset() A basic shutdown -p now works fine and powers the machine off. Issuing reboot/shutdown -r now however results in the above behaviour. The system has tracked HEAD for a few months and the problem has existed as long as I can remember. The machine is currently running the latest BIOS released by Gateway. I didn't fancy trying the newer BIOS's from Asus. I've attached a copy of the boot dmesg. If there's any other information that might be of help I can supply that. Regards, Richard Tector Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT #8: Tue May 3 23:23:47 BST 2005 root_at_daffy.tector.org.uk:/usr/obj/usr/src/sys/DAFFY ACPI APIC Table: <RCC RCCNILE > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (1000.04-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 1073676288 (1023 MB) avail memory = 1041862656 (993 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI-0698: *** Warning: Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [IO__] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [SB__] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [ICNT] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [ACPI] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [OSB4] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [BIOS] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [CMOS] had invalid type (Integer) for Scope operator, changed to (Scope) MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <RCC RCCNILE> on motherboard acpi0: Power Button (fixed) acpi0: Sleep Button (fixed) pci_link0: <ACPI PCI Link LN00> irq 0 on acpi0 pci_link1: <ACPI PCI Link LN01> irq 0 on acpi0 pci_link2: <ACPI PCI Link LN02> irq 0 on acpi0 pci_link3: <ACPI PCI Link LN03> irq 0 on acpi0 pci_link4: <ACPI PCI Link LN04> on acpi0 pci_link5: <ACPI PCI Link LN05> on acpi0 pci_link6: <ACPI PCI Link LN06> irq 0 on acpi0 pci_link7: <ACPI PCI Link LN07> irq 0 on acpi0 pci_link8: <ACPI PCI Link LN08> on acpi0 pci_link9: <ACPI PCI Link LN09> on acpi0 pci_link10: <ACPI PCI Link LN10> irq 0 on acpi0 pci_link11: <ACPI PCI Link LN11> irq 0 on acpi0 pci_link12: <ACPI PCI Link LN12> irq 0 on acpi0 pci_link13: <ACPI PCI Link LN13> irq 0 on acpi0 pci_link14: <ACPI PCI Link LN14> irq 0 on acpi0 pci_link15: <ACPI PCI Link LN15> on acpi0 pci_link16: <ACPI PCI Link LNUS> irq 0 on acpi0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 fxp0: <Intel 82559 Pro/100 Ethernet> port 0xb400-0xb43f mem 0xfe9fe000-0xfe9fefff,0xfe800000-0xfe8fffff irq 20 at device 2.0 on pci0 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:e0:18:03:be:99 pci0: <display, VGA> at device 7.0 (no driver attached) isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 15.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfffff000-0xffffffff at device 15.2 on pci0 ohci0: Could not map memory device_attach: ohci0 attach returned 6 pcib1: <ACPI Host-PCI bridge> on acpi0 pci1: <ACPI PCI bus> on pcib1 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xee80-0xeebf mem 0xfeba0000-0xfebbffff irq 21 at device 2.0 on pci1 em0: Ethernet address: 00:04:23:a7:18:4e em0: Speed:N/A Duplex:N/A em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xef00-0xef3f mem 0xfebc0000-0xfebdffff irq 31 at device 2.1 on pci1 em1: Ethernet address: 00:04:23:a7:18:4f em1: Speed:N/A Duplex:N/A pcib2: <PCI-PCI bridge> at device 3.0 on pci1 pci2: <PCI bus> on pcib2 arcmsr0: <ARECA ARC1120 PCI-X 8 PORTS SATA RAID CONTROLLER (RAID6-ENGINE Inside) Driver Version 1.20.00.02> mem 0xfc3ff000-0xfc3fffff irq 31 at device 14.0 on pci2 arcmsr0: [GIANT-LOCKED] sym0: <1010-33> port 0xe400-0xe4ff mem 0xfebfe000-0xfebfe3ff,0xfebfa000-0xfebfbfff irq 24 at device 5.0 on pci1 sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: handling phase mismatch from SCRIPTS. sym0: [GIANT-LOCKED] sym1: <1010-33> port 0xe800-0xe8ff mem 0xfebff000-0xfebff3ff,0xfebfc000-0xfebfdfff irq 25 at device 5.1 on pci1 sym1: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: handling phase mismatch from SCRIPTS. sym1: [GIANT-LOCKED] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. ad0: 117800MB <IC35L120AVVA07 0 VA6OA50K> at ata0-master UDMA33 acd0: DVDROM <PLEXTOR DVD-ROM PX-130A/1.01> at ata0-slave UDMA33 da0 at arcmsr0 bus 0 target 0 lun 0 da0: <Areca RAID5 R001> Fixed Direct Access SCSI-3 device da0: 166.666MB/s transfers (83.333MHz, offset 32, 16bit), Tagged Queueing Enabled da0: 1220703MB (2499999744 512 byte sectors: 255H 63S/T 155617C) ATA PseudoRAID loaded SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad0s1a em0: link state changed to UPReceived on Sun May 29 2005 - 11:20:13 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:35 UTC