Re: Panic on boot with new ACPI-CA

From: Nate Lawson <nate_at_root.org>
Date: Wed, 02 Nov 2005 17:03:57 -0800
As I mentioned to Jung-uk, the problem is likely an error in acpi-ca 
modifying memory after it has freed it.  The way to track this down is 
to enable memguard(9).  See the man page for info.  You need to add 
options DEBUG_MEMGUARD to your kernel, set the malloc type to watch to 
M_ACPICA, and rebuild your kernel and modules.  Memguard sets page 
permissions so we can catch the culprit who is modifying the memory.

http://www.freebsd.org/cgi/man.cgi?query=memguard&apropos=0&sektion=0&manpath=FreeBSD+6.0-current&format=html

If you need a kernel to keep running in production while debugging the 
other kernel, disable options INVARIANTS to get rid of the diagnostic panic.

-Nate

Munehiro Matsuda wrote:
> Hi,
> 
> Thanks for looking.
> I've put the output dsdt/asl file from following command onto the
> URL below.
> 
> command:
>   # acpidump -t -d -o Dynabook_MX190R.dsdt > Dynabook_MX190R.asl
> 
> URL:
>   http://wwwb.dcns.ne.jp/~haro01/Dynabook_MX190R.dsdt
>   http://wwwb.dcns.ne.jp/~haro01/Dynabook_MX190R.asl
> 
> Thanks in advance,
>   Haro
> 
> From: "Moore, Robert" <robert.moore_at_intel.com>
> Date: Wed, 2 Nov 2005 09:51:23 -0800
> ::If you will send me the acpidump for the machine, I will take a look at
> ::the problem.
> ::
> ::Thanks,
> ::Bob
> ::
> ::
> ::> -----Original Message-----
> ::> From: owner-freebsd-acpi_at_freebsd.org [mailto:owner-freebsd-
> ::> acpi_at_freebsd.org] On Behalf Of Munehiro Matsuda
> ::> Sent: Wednesday, November 02, 2005 7:08 AM
> ::> To: jkim_at_freebsd.org
> ::> Cc: freebsd-acpi_at_freebsd.org; freebsd-current_at_freebsd.org
> ::> Subject: Panic on boot with new ACPI-CA (Re: [HEADSUP] ACPI-CA
> ::20051021
> ::> import)
> ::> 
> ::> From: Jung-uk Kim <jkim_at_FreeBSD.org>
> ::> Date: Tue, 1 Nov 2005 17:49:44 -0500
> ::> ::On Tuesday 01 November 2005 05:01 pm, Jung-uk Kim wrote:
> ::> ::> ACPI-CA 20051021 will be imported any minute now.  I will let you
> ::> ::> know when completed.
> ::> ::
> ::> ::ACPI-CA 20051021 import is completed.
> ::> ::
> ::> ::Thanks!
> ::> ::
> ::> ::Jung-uk Kim
> ::> 
> ::> Hi,
> ::> 
> ::> After the import of new ACPI-CA code, I get system panic on boot,
> ::> where I used to get "can't fetch resources for \\_SB_.PCI0.FNC0.PRT_ -
> ::> AE_BAD_DATA" message.
> ::> 
> ::> If you need more info, please let me know.
> ::> 
> ::> Here's hand written down panic messages.
> ::>
> ::=-----------------------------------------------------------------------
> ::--
> ::> -
> ::> npx0: [FAST]
> ::> npx0: <math processor> on motherboard
> ::> npx0: INT 16 interface
> ::> acpi0: <TOSHIB 750> on motherboard
> ::> acpi0: Power Button (fixed)
> ::> pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
> ::> pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
> ::> pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
> ::> pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
> ::> pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
> ::> pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0
> ::> pci_link6: <ACPI PCI Link LNKG> irq 11 on acpi0
> ::> pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0
> ::> Memory modified after free 0xc1ee1600(124) val=c _at_ 0xc1ee1600
> ::> panic: Most recently used by acpica
> ::> 
> ::> cpuid = 0
> ::> KDB: enter: panic
> ::> [thread pid 0 tid 0]
> ::> Stopped at   kbt_enter+0x2b: nop
> ::> db> bt
> ::> Tracing pid 0 tid 0 td 0xc0736780
> ::> kdb_enter(c06cc93e) at kdb_enter+0x2b
> ::> panic(c06e42e7,c089c1a8,c06e42b8,c1ee1600,8c) at panic+0x127
> ::> mtrash_ctor(c1ee1600,80,0,1) at mtrash_ctor+0x4d
> ::> uma_zalloc_arg(c104a1e0,0,1) at uma_zalloc_arg+0x10f
> ::> malloc(68,c089ef00,1,c0c20bb4,c087e562) at malloc+0xb2
> ::> AcpiOsAllocate(68,0,c1ece1e0,4,c0c20be0) at AcpiOsAllocate+0x12
> ::> AcpiUtCallocate(68,10,c089b337,157,c0c20bec) at AcpiUtCallocate+0x16
> ::> AcpiGetObjectInfo(c1ece1e0,c0c20bf8,0,c1ece1e0,ffffffff) at
> ::> AcpiGetObjectInfo+0x5b
> ::> acpi_MatchHid(0,c089f740,6,c1ece1e0,0) at acpi_MatchHid+0x32
> ::> acpi_probe_child(c1ece1e0,4,c1e9c800,0,0) at acpi_probe_child+0x94
> ::> AcpiNsWalkNamespace(0,ffffffff,64,1,c0883c98) at
> ::AcpiNsWalkNamespace+0xa1
> ::> AcpiWalkNamespace(0,ffffffff,64,c0883c98,c1e9c800) at
> ::> AcpiWalkNamespace+0x3b
> ::> acpi_attach(c1e9c800) at acpi_attach+0x4ff
> ::> device_attach(c1e9c800,0,c1e9c800,c1e9d300,0) at device_attach+0x58
> ::> device_probe_and attach(c1e9c800) at device_probe_and_attach+0xe0
> ::> bus_generic_attach(c1e9d300,c1e9d300,c1e9d300,c0c20d40,c0529340) at
> ::> bus_generic_attach+0x16
> ::> nexus_attach(c1e9d300) at nexus_attach+0x13
> ::> device_attach(c1e9d300,c0533914,c1e9d300,c0721bb0,c28000) at
> ::> device_attach+0x58
> ::> device_probe_and_attach(c1e9d300) at device_probe_and_attach+0xe0
> ::> root_bus_configure(c0c20d88,c04eb592,0,c1ec00,c1e000) at
> ::> root_bus_configure+0x16configure(0,c1ec00,c1e000,0,c04392f5) at
> ::> configure+0x9
> ::> mi_startup() at mi_startup+0x96
> ::> begin() at begine+0x2c
> ::>
> ::=-----------------------------------------------------------------------
> ::--
> ::> -
> ::> 
> ::> Following is boot message from the last kernel, just before the
> ::> import of new code.
> ::>
> ::=-----------------------------------------------------------------------
> ::--
> ::> -
> ::> Copyright (c) 1992-2005 The FreeBSD Project.
> ::> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
> ::1994
> ::> 	The Regents of the University of California. All rights
> ::reserved.
> ::> FreeBSD 7.0-CURRENT #135: Mon Oct 31 21:33:52 JST 2005
> ::>
> ::haro_at_legacy.ttr.kubota.co.jp:/home/haro/tmp/sys-7/i386/compile/LEGACY
> ::> WARNING: WITNESS option enabled, expect reduced performance.
> ::> Timecounter "i8254" frequency 1193182 Hz quality 0
> ::> CPU: Intel(R) Pentium(R) M processor 1.10GHz (1097.26-MHz 686-class
> ::CPU)
> ::>   Origin = "GenuineIntel"  Id = 0x6d6  Stepping = 6
> ::> 
> ::>
> ::Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV
> ::,P
> ::> AT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
> ::>   Features2=0x180<EST,TM2>
> ::> real memory  = 787808256 (751 MB)
> ::> avail memory = 761475072 (726 MB)
> ::> npx0: [FAST]
> ::> npx0: <math processor> on motherboard
> ::> npx0: INT 16 interface
> ::> acpi0: <TOSHIB 750> on motherboard
> ::> acpi0: Power Button (fixed)
> ::> pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
> ::> pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
> ::> pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
> ::> pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
> ::> pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
> ::> pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0
> ::> pci_link6: <ACPI PCI Link LNKG> irq 11 on acpi0
> ::> pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0
> ::> can't fetch resources for \\_SB_.PCI0.FNC0.PRT_ - AE_BAD_DATA
> ::> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> ::> acpi_timer0: <24-bit timer at 3.579545MHz> port 0xd808-0xd80b on acpi0
> ::> cpu0: <ACPI CPU> on acpi0
> ::> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> ::> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> ::> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> ::> pci0: <ACPI PCI bus> on pcib0
> ::> pci0: <base peripheral> at device 0.1 (no driver attached)
> ::> pci0: <base peripheral> at device 0.3 (no driver attached)
> ::> agp0: <Intel 82855GME (855GME GMCH) SVGA controller> port
> ::0xeff8-0xefff
> ::> mem 0xd8000000-0xdfffffff,0xd0000000-0xd007ffff irq 10 at device 2.0
> ::on
> ::> pci0
> ::> agp0: detected 16252k stolen memory
> ::> agp0: aperture size is 128M
> ::> pci0: <display> at device 2.1 (no driver attached)
> ::> uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xcfe0-0xcfff
> ::irq
> ::> 10 at device 29.0 on pci0
> ::> uhci0: [GIANT-LOCKED]
> ::> usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
> ::> usb0: USB revision 1.0
> ::> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> ::> uhub0: 2 ports with 2 removable, self powered
> ::> uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xcf80-0xcf9f
> ::irq
> ::> 11 at device 29.1 on pci0
> ::> uhci1: [GIANT-LOCKED]
> ::> usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
> ::> usb1: USB revision 1.0
> ::> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> ::> uhub1: 2 ports with 2 removable, self powered
> ::> uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xcf60-0xcf7f
> ::irq
> ::> 11 at device 29.2 on pci0
> ::> uhci2: [GIANT-LOCKED]
> ::> usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
> ::> usb2: USB revision 1.0
> ::> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> ::> uhub2: 2 ports with 2 removable, self powered
> ::> ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xcffffc00-
> ::> 0xcfffffff irq 11 at device 29.7 on pci0
> ::> ehci0: [GIANT-LOCKED]
> ::> usb3: EHCI version 1.0
> ::> usb3: companion controllers, 2 ports each: usb0 usb1 usb2
> ::> usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
> ::> usb3: USB revision 2.0
> ::> uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> ::> uhub3: 6 ports with 6 removable, self powered
> ::> pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> ::> pci1: <ACPI PCI bus> on pcib1
> ::> iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xcfeff000-0xcfefffff irq 11
> ::at
> ::> device 5.0 on pci1
> ::> iwi0: Ethernet address: 00:0e:35:c2:a2:7b
> ::> fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0xcf00-0xcf3f
> ::mem
> ::> 0xcfefe000-0xcfefefff irq 11 at device 8.0 on pci1
> ::> miibus0: <MII bus> on fxp0
> ::> inphy0: <i82562ET 10/100 media interface> on miibus0
> ::> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> ::> fxp0: Ethernet address: 00:0e:7b:eb:71:23
> ::> cbb0: <TI6411 PCI-CardBus Bridge> at device 11.0 on pci1
> ::> cardbus0: <CardBus bus> on cbb0
> ::> pccard0: <16-bit PCCard bus> on cbb0
> ::> cbb1: <TI6411 PCI-CardBus Bridge> at device 11.1 on pci1
> ::> cardbus1: <CardBus bus> on cbb1
> ::> pccard1: <16-bit PCCard bus> on cbb1
> ::> fwohci0: <1394 Open Host Controller Interface> mem 0xcfefd800-
> ::> 0xcfefdfff,0xcfef8000-0xcfefbfff irq 11 at device 11.2 on pci1
> ::> fwohci0: OHCI version 1.10 (ROM=1)
> ::> fwohci0: No. of Isochronous channels is 4.
> ::> fwohci0: EUI64 00:00:39:00:00:72:41:eb
> ::> fwohci0: Phy 1394a available S400, 2 ports.
> ::> fwohci0: Link S400, max_rec 2048 bytes.
> ::> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> ::> sbp0: <SBP-2/SCSI over FireWire> on firewire0
> ::> fwe0: <Ethernet over FireWire> on firewire0
> ::> if_fwe0: Fake Ethernet address: 02:00:39:72:41:eb
> ::> fwe0: Ethernet address: 02:00:39:72:41:eb
> ::> fwe0: if_start running deferred for Giant
> ::> fwohci0: Initiate bus reset
> ::> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
> ::> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
> ::> firewire0: bus manager 0 (me)
> ::> pci1: <base peripheral> at device 11.4 (no driver attached)
> ::> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> ::> isa0: <ISA bus> on isab0
> ::> atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-
> ::> 0x177,0x376,0xbfa0-0xbfaf irq 11 at device 31.1 on pci0
> ::> ata0: <ATA channel 0> on atapci0
> ::> ata1: <ATA channel 1> on atapci0
> ::> pcm0: <Intel ICH4 (82801DB)> port 0xbe00-0xbeff,0xbdc0-0xbdff mem
> ::> 0xcfdffe00-0xcfdfffff,0xcfdffd00-0xcfdffdff irq 11 at device 31.5 on
> ::pci0
> ::> pcm0: [GIANT-LOCKED]
> ::> pcm0: <SigmaTel STAC9750/51 AC97 Codec>
> ::> pci0: <simple comms, generic modem> at device 31.6 (no driver
> ::attached)
> ::> acpi_lid0: <Control Method Lid Switch> on acpi0
> ::> battery0: <ACPI Control Method Battery> on acpi0
> ::> acpi_button0: <Power Button> on acpi0
> ::> acpi_acad0: <AC Adapter> on acpi0
> ::> acpi_toshiba0: <Toshiba HCI Extras> on acpi0
> ::> acpi_tz0: <Thermal Zone> on acpi0
> ::> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> ::> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> ::> kbd0 at atkbd0
> ::> atkbd0: [GIANT-LOCKED]
> ::> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> ::> psm0: [GIANT-LOCKED]
> ::> psm0: model Generic PS/2 mouse, device ID 0
> ::> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
> ::on
> ::> acpi0
> ::> sio0: type 16550A
> ::> pmtimer0 on isa0
> ::> orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff pnpid
> ::> ORM0000 on isa0
> ::> sc0: <System console> at flags 0x100 on isa0
> ::> sc0: VGA <16 virtual consoles, flags=0x300>
> ::> sio1: configured irq 3 not in bitmap of probed irqs 0
> ::> sio1: port may not be enabled
> ::> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> ::isa0
> ::> Timecounter "TSC" frequency 1097256406 Hz quality 800
> ::> Timecounters tick every 1.000 msec
> ::> ad0: 57231MB <HTS541060G9AT00 MB3WA5EJ> at ata0-master UDMA100
> ::> acd0: DVDR <MATSHITADVD-RAM UJ-822S/1.00> at ata1-master UDMA33
> ::> pccard1: Allocation failed for cfe 1
> ::> sio4: <KDDI W01K> at port 0x2f8-0x2ff irq 11 function 0 config 2 on
> ::> pccard1
> ::> sio4: type 16550A
> ::> sio4: unable to activate interrupt in fast mode - using normal mode
> ::> Trying to mount root from ufs:/dev/ad0s4a
Received on Thu Nov 03 2005 - 00:04:43 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:47 UTC