Re: Panic on boot with new ACPI-CA

From: Munehiro Matsuda <haro_at_h4.dion.ne.jp>
Date: Thu, 03 Nov 2005 12:24:04 +0900 (JST)
Hi Nate,

Thanks for memguard tip.
But now, I'm confuse with the outcome. :-(

1) With memguard enabled, system boots up just fine, even acpi compiled
   into kernel or loaded as a module.

2) Without memguard, but with acpi compiled into kernel, system boots up
   past the reported point. 
   But this time, npanics with page fault further into the booting process,
   just as Marcel reported yesterday.

3) Without memguard and with acpi loaded as module, system panics as
   reported in my original mail.

So, the memguard works as workaround for me, but not as debuging aid. ;-P

If you need more info or any other way to debug, please let me know.

Thanks in advance,
 Haro

From: Nate Lawson <nate_at_root.org>
Date: Wed, 02 Nov 2005 17:03:57 -0800
::As I mentioned to Jung-uk, the problem is likely an error in acpi-ca 
::modifying memory after it has freed it.  The way to track this down is 
::to enable memguard(9).  See the man page for info.  You need to add 
::options DEBUG_MEMGUARD to your kernel, set the malloc type to watch to 
::M_ACPICA, and rebuild your kernel and modules.  Memguard sets page 
::permissions so we can catch the culprit who is modifying the memory.
::
::http://www.freebsd.org/cgi/man.cgi?query=memguard&apropos=0&sektion=0&manpath=FreeBSD+6.0-current&format=html
::
::If you need a kernel to keep running in production while debugging the 
::other kernel, disable options INVARIANTS to get rid of the diagnostic panic.
::
::-Nate
::
::Munehiro Matsuda wrote:
::> Hi,
::> 
::> Thanks for looking.
::> I've put the output dsdt/asl file from following command onto the
::> URL below.
::> 
::> command:
::>   # acpidump -t -d -o Dynabook_MX190R.dsdt > Dynabook_MX190R.asl
::> 
::> URL:
::>   http://wwwb.dcns.ne.jp/~haro01/Dynabook_MX190R.dsdt
::>   http://wwwb.dcns.ne.jp/~haro01/Dynabook_MX190R.asl
::> 
::> Thanks in advance,
::>   Haro
::> 
::> From: "Moore, Robert" <robert.moore_at_intel.com>
::> Date: Wed, 2 Nov 2005 09:51:23 -0800
::> ::If you will send me the acpidump for the machine, I will take a look at
::> ::the problem.
::> ::
::> ::Thanks,
::> ::Bob
::> ::
::> ::
::> ::> -----Original Message-----
::> ::> From: owner-freebsd-acpi_at_freebsd.org [mailto:owner-freebsd-
::> ::> acpi_at_freebsd.org] On Behalf Of Munehiro Matsuda
::> ::> Sent: Wednesday, November 02, 2005 7:08 AM
::> ::> To: jkim_at_freebsd.org
::> ::> Cc: freebsd-acpi_at_freebsd.org; freebsd-current_at_freebsd.org
::> ::> Subject: Panic on boot with new ACPI-CA (Re: [HEADSUP] ACPI-CA
::> ::20051021
::> ::> import)
::> ::> 
::> ::> From: Jung-uk Kim <jkim_at_FreeBSD.org>
::> ::> Date: Tue, 1 Nov 2005 17:49:44 -0500
::> ::> ::On Tuesday 01 November 2005 05:01 pm, Jung-uk Kim wrote:
::> ::> ::> ACPI-CA 20051021 will be imported any minute now.  I will let you
::> ::> ::> know when completed.
::> ::> ::
::> ::> ::ACPI-CA 20051021 import is completed.
::> ::> ::
::> ::> ::Thanks!
::> ::> ::
::> ::> ::Jung-uk Kim
::> ::> 
::> ::> Hi,
::> ::> 
::> ::> After the import of new ACPI-CA code, I get system panic on boot,
::> ::> where I used to get "can't fetch resources for \\_SB_.PCI0.FNC0.PRT_ -
::> ::> AE_BAD_DATA" message.
::> ::> 
::> ::> If you need more info, please let me know.
::> ::> 
::> ::> Here's hand written down panic messages.
::> ::>
::> ::=-----------------------------------------------------------------------
::> ::--
::> ::> -
::> ::> npx0: [FAST]
::> ::> npx0: <math processor> on motherboard
::> ::> npx0: INT 16 interface
::> ::> acpi0: <TOSHIB 750> on motherboard
::> ::> acpi0: Power Button (fixed)
::> ::> pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
::> ::> pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
::> ::> pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
::> ::> pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
::> ::> pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
::> ::> pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0
::> ::> pci_link6: <ACPI PCI Link LNKG> irq 11 on acpi0
::> ::> pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0
::> ::> Memory modified after free 0xc1ee1600(124) val=c _at_ 0xc1ee1600
::> ::> panic: Most recently used by acpica
::> ::> 
::> ::> cpuid = 0
::> ::> KDB: enter: panic
::> ::> [thread pid 0 tid 0]
::> ::> Stopped at   kbt_enter+0x2b: nop
::> ::> db> bt
::> ::> Tracing pid 0 tid 0 td 0xc0736780
::> ::> kdb_enter(c06cc93e) at kdb_enter+0x2b
::> ::> panic(c06e42e7,c089c1a8,c06e42b8,c1ee1600,8c) at panic+0x127
::> ::> mtrash_ctor(c1ee1600,80,0,1) at mtrash_ctor+0x4d
::> ::> uma_zalloc_arg(c104a1e0,0,1) at uma_zalloc_arg+0x10f
::> ::> malloc(68,c089ef00,1,c0c20bb4,c087e562) at malloc+0xb2
::> ::> AcpiOsAllocate(68,0,c1ece1e0,4,c0c20be0) at AcpiOsAllocate+0x12
::> ::> AcpiUtCallocate(68,10,c089b337,157,c0c20bec) at AcpiUtCallocate+0x16
::> ::> AcpiGetObjectInfo(c1ece1e0,c0c20bf8,0,c1ece1e0,ffffffff) at
::> ::> AcpiGetObjectInfo+0x5b
::> ::> acpi_MatchHid(0,c089f740,6,c1ece1e0,0) at acpi_MatchHid+0x32
::> ::> acpi_probe_child(c1ece1e0,4,c1e9c800,0,0) at acpi_probe_child+0x94
::> ::> AcpiNsWalkNamespace(0,ffffffff,64,1,c0883c98) at
::> ::AcpiNsWalkNamespace+0xa1
::> ::> AcpiWalkNamespace(0,ffffffff,64,c0883c98,c1e9c800) at
::> ::> AcpiWalkNamespace+0x3b
::> ::> acpi_attach(c1e9c800) at acpi_attach+0x4ff
::> ::> device_attach(c1e9c800,0,c1e9c800,c1e9d300,0) at device_attach+0x58
::> ::> device_probe_and attach(c1e9c800) at device_probe_and_attach+0xe0
::> ::> bus_generic_attach(c1e9d300,c1e9d300,c1e9d300,c0c20d40,c0529340) at
::> ::> bus_generic_attach+0x16
::> ::> nexus_attach(c1e9d300) at nexus_attach+0x13
::> ::> device_attach(c1e9d300,c0533914,c1e9d300,c0721bb0,c28000) at
::> ::> device_attach+0x58
::> ::> device_probe_and_attach(c1e9d300) at device_probe_and_attach+0xe0
::> ::> root_bus_configure(c0c20d88,c04eb592,0,c1ec00,c1e000) at
::> ::> root_bus_configure+0x16configure(0,c1ec00,c1e000,0,c04392f5) at
::> ::> configure+0x9
::> ::> mi_startup() at mi_startup+0x96
::> ::> begin() at begine+0x2c
::> ::>
::> ::=-----------------------------------------------------------------------
::> ::--
::> ::> -
::> ::> 
::> ::> Following is boot message from the last kernel, just before the
::> ::> import of new code.
::> ::>
::> ::=-----------------------------------------------------------------------
::> ::--
::> ::> -
::> ::> Copyright (c) 1992-2005 The FreeBSD Project.
::> ::> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
::> ::1994
::> ::> 	The Regents of the University of California. All rights
::> ::reserved.
::> ::> FreeBSD 7.0-CURRENT #135: Mon Oct 31 21:33:52 JST 2005
::> ::>
::> ::haro_at_legacy.ttr.kubota.co.jp:/home/haro/tmp/sys-7/i386/compile/LEGACY
::> ::> WARNING: WITNESS option enabled, expect reduced performance.
::> ::> Timecounter "i8254" frequency 1193182 Hz quality 0
::> ::> CPU: Intel(R) Pentium(R) M processor 1.10GHz (1097.26-MHz 686-class
::> ::CPU)
::> ::>   Origin = "GenuineIntel"  Id = 0x6d6  Stepping = 6
::> ::> 
::> ::>
::> ::Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV
::> ::,P
::> ::> AT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
::> ::>   Features2=0x180<EST,TM2>
::> ::> real memory  = 787808256 (751 MB)
::> ::> avail memory = 761475072 (726 MB)
::> ::> npx0: [FAST]
::> ::> npx0: <math processor> on motherboard
::> ::> npx0: INT 16 interface
::> ::> acpi0: <TOSHIB 750> on motherboard
::> ::> acpi0: Power Button (fixed)
::> ::> pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
::> ::> pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
::> ::> pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
::> ::> pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
::> ::> pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
::> ::> pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0
::> ::> pci_link6: <ACPI PCI Link LNKG> irq 11 on acpi0
::> ::> pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0
::> ::> can't fetch resources for \\_SB_.PCI0.FNC0.PRT_ - AE_BAD_DATA
::> ::> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
::> ::> acpi_timer0: <24-bit timer at 3.579545MHz> port 0xd808-0xd80b on acpi0
::> ::> cpu0: <ACPI CPU> on acpi0
::> ::> est0: <Enhanced SpeedStep Frequency Control> on cpu0
::> ::> p4tcc0: <CPU Frequency Thermal Control> on cpu0
::> ::> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
::> ::> pci0: <ACPI PCI bus> on pcib0
::> ::> pci0: <base peripheral> at device 0.1 (no driver attached)
::> ::> pci0: <base peripheral> at device 0.3 (no driver attached)
::> ::> agp0: <Intel 82855GME (855GME GMCH) SVGA controller> port
::> ::0xeff8-0xefff
::> ::> mem 0xd8000000-0xdfffffff,0xd0000000-0xd007ffff irq 10 at device 2.0
::> ::on
::> ::> pci0
::> ::> agp0: detected 16252k stolen memory
::> ::> agp0: aperture size is 128M
::> ::> pci0: <display> at device 2.1 (no driver attached)
::> ::> uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xcfe0-0xcfff
::> ::irq
::> ::> 10 at device 29.0 on pci0
::> ::> uhci0: [GIANT-LOCKED]
::> ::> usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
::> ::> usb0: USB revision 1.0
::> ::> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
::> ::> uhub0: 2 ports with 2 removable, self powered
::> ::> uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xcf80-0xcf9f
::> ::irq
::> ::> 11 at device 29.1 on pci0
::> ::> uhci1: [GIANT-LOCKED]
::> ::> usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
::> ::> usb1: USB revision 1.0
::> ::> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
::> ::> uhub1: 2 ports with 2 removable, self powered
::> ::> uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xcf60-0xcf7f
::> ::irq
::> ::> 11 at device 29.2 on pci0
::> ::> uhci2: [GIANT-LOCKED]
::> ::> usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
::> ::> usb2: USB revision 1.0
::> ::> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
::> ::> uhub2: 2 ports with 2 removable, self powered
::> ::> ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xcffffc00-
::> ::> 0xcfffffff irq 11 at device 29.7 on pci0
::> ::> ehci0: [GIANT-LOCKED]
::> ::> usb3: EHCI version 1.0
::> ::> usb3: companion controllers, 2 ports each: usb0 usb1 usb2
::> ::> usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
::> ::> usb3: USB revision 2.0
::> ::> uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
::> ::> uhub3: 6 ports with 6 removable, self powered
::> ::> pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
::> ::> pci1: <ACPI PCI bus> on pcib1
::> ::> iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xcfeff000-0xcfefffff irq 11
::> ::at
::> ::> device 5.0 on pci1
::> ::> iwi0: Ethernet address: 00:0e:35:c2:a2:7b
::> ::> fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0xcf00-0xcf3f
::> ::mem
::> ::> 0xcfefe000-0xcfefefff irq 11 at device 8.0 on pci1
::> ::> miibus0: <MII bus> on fxp0
::> ::> inphy0: <i82562ET 10/100 media interface> on miibus0
::> ::> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
::> ::> fxp0: Ethernet address: 00:0e:7b:eb:71:23
::> ::> cbb0: <TI6411 PCI-CardBus Bridge> at device 11.0 on pci1
::> ::> cardbus0: <CardBus bus> on cbb0
::> ::> pccard0: <16-bit PCCard bus> on cbb0
::> ::> cbb1: <TI6411 PCI-CardBus Bridge> at device 11.1 on pci1
::> ::> cardbus1: <CardBus bus> on cbb1
::> ::> pccard1: <16-bit PCCard bus> on cbb1
::> ::> fwohci0: <1394 Open Host Controller Interface> mem 0xcfefd800-
::> ::> 0xcfefdfff,0xcfef8000-0xcfefbfff irq 11 at device 11.2 on pci1
::> ::> fwohci0: OHCI version 1.10 (ROM=1)
::> ::> fwohci0: No. of Isochronous channels is 4.
::> ::> fwohci0: EUI64 00:00:39:00:00:72:41:eb
::> ::> fwohci0: Phy 1394a available S400, 2 ports.
::> ::> fwohci0: Link S400, max_rec 2048 bytes.
::> ::> firewire0: <IEEE1394(FireWire) bus> on fwohci0
::> ::> sbp0: <SBP-2/SCSI over FireWire> on firewire0
::> ::> fwe0: <Ethernet over FireWire> on firewire0
::> ::> if_fwe0: Fake Ethernet address: 02:00:39:72:41:eb
::> ::> fwe0: Ethernet address: 02:00:39:72:41:eb
::> ::> fwe0: if_start running deferred for Giant
::> ::> fwohci0: Initiate bus reset
::> ::> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
::> ::> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
::> ::> firewire0: bus manager 0 (me)
::> ::> pci1: <base peripheral> at device 11.4 (no driver attached)
::> ::> isab0: <PCI-ISA bridge> at device 31.0 on pci0
::> ::> isa0: <ISA bus> on isab0
::> ::> atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-
::> ::> 0x177,0x376,0xbfa0-0xbfaf irq 11 at device 31.1 on pci0
::> ::> ata0: <ATA channel 0> on atapci0
::> ::> ata1: <ATA channel 1> on atapci0
::> ::> pcm0: <Intel ICH4 (82801DB)> port 0xbe00-0xbeff,0xbdc0-0xbdff mem
::> ::> 0xcfdffe00-0xcfdfffff,0xcfdffd00-0xcfdffdff irq 11 at device 31.5 on
::> ::pci0
::> ::> pcm0: [GIANT-LOCKED]
::> ::> pcm0: <SigmaTel STAC9750/51 AC97 Codec>
::> ::> pci0: <simple comms, generic modem> at device 31.6 (no driver
::> ::attached)
::> ::> acpi_lid0: <Control Method Lid Switch> on acpi0
::> ::> battery0: <ACPI Control Method Battery> on acpi0
::> ::> acpi_button0: <Power Button> on acpi0
::> ::> acpi_acad0: <AC Adapter> on acpi0
::> ::> acpi_toshiba0: <Toshiba HCI Extras> on acpi0
::> ::> acpi_tz0: <Thermal Zone> on acpi0
::> ::> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
::> ::> atkbd0: <AT Keyboard> irq 1 on atkbdc0
::> ::> kbd0 at atkbd0
::> ::> atkbd0: [GIANT-LOCKED]
::> ::> psm0: <PS/2 Mouse> irq 12 on atkbdc0
::> ::> psm0: [GIANT-LOCKED]
::> ::> psm0: model Generic PS/2 mouse, device ID 0
::> ::> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
::> ::on
::> ::> acpi0
::> ::> sio0: type 16550A
::> ::> pmtimer0 on isa0
::> ::> orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff pnpid
::> ::> ORM0000 on isa0
::> ::> sc0: <System console> at flags 0x100 on isa0
::> ::> sc0: VGA <16 virtual consoles, flags=0x300>
::> ::> sio1: configured irq 3 not in bitmap of probed irqs 0
::> ::> sio1: port may not be enabled
::> ::> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
::> ::isa0
::> ::> Timecounter "TSC" frequency 1097256406 Hz quality 800
::> ::> Timecounters tick every 1.000 msec
::> ::> ad0: 57231MB <HTS541060G9AT00 MB3WA5EJ> at ata0-master UDMA100
::> ::> acd0: DVDR <MATSHITADVD-RAM UJ-822S/1.00> at ata1-master UDMA33
::> ::> pccard1: Allocation failed for cfe 1
::> ::> sio4: <KDDI W01K> at port 0x2f8-0x2ff irq 11 function 0 config 2 on
::> ::> pccard1
::> ::> sio4: type 16550A
::> ::> sio4: unable to activate interrupt in fast mode - using normal mode
::> ::> Trying to mount root from ufs:/dev/ad0s4a
::
Received on Thu Nov 03 2005 - 02:24:08 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:47 UTC