7-CURRENT-SNAP009-i386-bootonly.iso on Shuttle XPC w/ AMD X2 (was Re: Side note on Shuttle XPC)

From: Matthew Dillon <dillon_at_apollo.backplane.com>
Date: Fri, 18 Nov 2005 11:23:17 -0800 (PST)
    This ISO booted into the installer but it appears to be a UP build.
    I couldn't get anywhere after that.  It wouldn't auto-DHCP the network.
    The console gets:

	no such user: _dhcp, falling back to "nobody"
	no such user: nobody
	exiting.

    A manual network configuration via sysinstall in the custom install
    sequence barely seems to work, but then fails to contact the ftp site.

	nve0: link state changed to DOWN
	nve0: link state changed to UP
	nve0: device timeout (2)
	nve0: link state changed to DOWN
	nve0: link state changed to UP
	[ Looking up host ftp.freebsd.org. ]
	[ 5 minutes go by ]
	[ sysinstall returns to main menu without giving any indication
	  of success or failure ]

    I tried a Standard install and it was able to contact the ftp site,
    but it couldn't find a distribution to install.

    I'm afraid that's about as far as I can go, perhaps someone can give
    me a pointer to an installable ISO.  Since the ISO does not appear
    to have any standard UNIX commands on it, the shell is kinda useless.
    (I thought you guys fixed that little problem... what's the point of
    having an ISO at all if you don't stick any useful system binaries on
    it?  It's really frustrating to have a shell prompt there but not be
    able to run things like 'ifconfig', 'ping', or even 'ls').

    Is there an SMP i386 ISO I can try?  Maybe one with standard unix
    commands on it so I can play around?

						-Matt

FreeBSD 7-CURRENT-SNAP009 #0: Sat Nov 12 13:58:18 UTC 2005
    root_at_harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
ACPI APIC Table: <XPC    AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Hammer Family processor - Model Unknown (2009.79-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20f32  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
  AMD Features2=0x1<LAHF>
real memory  = 1073676288 (1023 MB)
avail memory = 1037381632 (989 MB)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <XPC AWRDACPI> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNK1> on acpi0
pci_link1: <ACPI PCI Link LNK2> on acpi0
pci_link2: <ACPI PCI Link LNK3> irq 12 on acpi0
pci_link3: <ACPI PCI Link LNK4> irq 3 on acpi0
pci_link4: <ACPI PCI Link LNK5> on acpi0
pci_link5: <ACPI PCI Link LUBA> irq 11 on acpi0
pci_link6: <ACPI PCI Link LUBB> irq 11 on acpi0
pci_link7: <ACPI PCI Link LMAC> irq 10 on acpi0
pci_link8: <ACPI PCI Link LAPU> on acpi0
pci_link9: <ACPI PCI Link LACI> irq 5 on acpi0
pci_link10: <ACPI PCI Link LMCI> on acpi0
pci_link11: <ACPI PCI Link LSMB> irq 10 on acpi0
pci_link12: <ACPI PCI Link LUB2> irq 11 on acpi0
pci_link13: <ACPI PCI Link LFIR> on acpi0
pci_link14: <ACPI PCI Link L3CM> on acpi0
pci_link15: <ACPI PCI Link LIDE> on acpi0
pci_link16: <ACPI PCI Link LSID> on acpi0
pci_link17: <ACPI PCI Link LFID> irq 11 on acpi0
pci_link18: <ACPI PCI Link APC1> irq 16 on acpi0
pci_link19: <ACPI PCI Link APC2> irq 17 on acpi0
pci_link20: <ACPI PCI Link APC3> irq 18 on acpi0
pci_link21: <ACPI PCI Link APC4> irq 19 on acpi0
pci_link22: <ACPI PCI Link APC5> irq 16 on acpi0
pci_link23: <ACPI PCI Link APCF> irq 0 on acpi0
pci_link24: <ACPI PCI Link APCG> irq 0 on acpi0
pci_link25: <ACPI PCI Link APCH> irq 0 on acpi0
pci_link26: <ACPI PCI Link APCI> irq 0 on acpi0
pci_link27: <ACPI PCI Link APCJ> irq 0 on acpi0
pci_link28: <ACPI PCI Link APCK> irq 0 on acpi0
pci_link29: <ACPI PCI Link APCS> irq 23 on acpi0
pci_link30: <ACPI PCI Link APCL> irq 0 on acpi0
pci_link31: <ACPI PCI Link APCM> irq 0 on acpi0
pci_link32: <ACPI PCI Link AP3C> irq 0 on acpi0
pci_link33: <ACPI PCI Link APCZ> irq 0 on acpi0
pci_link34: <ACPI PCI Link APSI> irq 0 on acpi0
pci_link35: <ACPI PCI Link APSJ> irq 0 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0xcf0-0xcf3 on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <NVIDIA nForce3-250 AGP Controller> mem 0xe8000000-0xebffffff at device 0.0 on pci0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xee004000-0xee004fff irq 20 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xee005000-0xee005fff irq 21 at device 2.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0: <NVIDIA nForce3 250 USB 2.0 controller> mem 0xee000000-0xee0000ff irq 22 at device 2.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <NVIDIA nForce3 250 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
nve0: <NVIDIA nForce MCP7 Networking Adapter> port 0xe200-0xe207 mem 0xee001000-0xee001fff irq 20 at device 5.0 on pci0
nve0: Ethernet address 00:30:1b:b8:a9:93
miibus0: <MII bus> on nve0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nve0: Ethernet address: 00:30:1b:b8:a9:93
nve0: [GIANT-LOCKED]
pci0: <multimedia, audio> at device 6.0 (no driver attached)
atapci0: <nVidia nForce3 Pro UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 8.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce3 Pro SATA150 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xeb00-0xeb0f,0xec00-0xec7f irq 22 at device 10.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pcib1: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci_link20: BIOS IRQ 21 for 0.6.INTA is invalid
pci2: <ACPI PCI bus> on pcib2
pci2: <display, VGA> at device 6.0 (no driver attached)
fwohci0: <VIA Fire II (VT6306)> port 0xd000-0xd07f mem 0xed020000-0xed0207ff irq 19 at device 7.0 on pci2
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:30:1b:b8:00:00:a9:f7
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:30:1b:00:a9:f7
fwe0: Ethernet address: 02:30:1b:00:a9:f7
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xd0000-0xd3fff,0xd4000-0xd57ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2009792195 Hz quality 800
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0aa2704
acd0: CDROM <SONY CD-ROM CDU5215/7YS1> at ata1-master UDMA33
ad6: 156334MB <Maxtor 6Y160M0 YAR51BW0> at ata3-master SATA150
acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x11 ascq=0x00 error=0
acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x11 ascq=0x00 error=0
Trying to mount root from ufs:/dev/md0
Received on Fri Nov 18 2005 - 18:23:49 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:47 UTC