Mark Kirkwood wrote: > Evgeny Piven wrote: > >> When trying to reboot my newly updated 6.0-RC1 machine (updated from >> 5.4-RELEASE), my machine hangs during the reboot. >> This issue has apparently come up before, but never really had a clean >> fix (correct me if I'm wrong). >> From what I've read, the quick fix for this would be turning on USB >> support in BIOS, though this didn't help in my case. >> Basically the hang happens right after the "Uptime: " message is >> displayed and then the machine just sits there and does nothing. From >> what I've read, this might have something to do with ACPI support. > > Looks like you have run into a new variant of the issue :-) > The previous stuff seems to have been tied to USB and (in my case) SMP. > Does disabling (or enabling) ACPI make any difference? > In any case, it might be worth setting 'hw.pci.enable_io_modes=0' in > /boot/loader.conf and seeing if it makes any difference. All I can say for now is that hw.pci.enable_io_modes=0 did not help. Best regards, Evgeny PivenReceived on Mon Oct 17 2005 - 01:50:56 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:45 UTC