I ran into problems when attempting to install 6.0-BETA2 and 6.0-BETA3 from a SCSI cdrom. I can boot the cdrom and get into sysinstall, but when sysinstall tries to mount /dev/cd0, it gets an EIO error. Vty2 reports the error: g_vfs_done(): cd0[READ(offset=32768, length=2048) error = 5 I was able to complete the installation by moving the cd to another machine, exporting via nfs, and doing an nfs installation. After installation, I can boot the machine from the hard drive and mount the install disk on the cd drive, but if I boot the install cdrom, I seen the following boot messages: cd0 at ahc0 bus 0 target 5 lun 0 cd0: <NEC CD-ROM DRIVE:462 1.14> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present Here are the boot messages when booting from the hard drive with the install cd in the drive: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA3 #7: Tue Aug 30 19:19:43 PDT 2005 dl_at_siamese.catspoiler.org:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) III CPU family 1400MHz (1399.33-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 1073676288 (1023 MB) avail memory = 1041616896 (993 MB) ACPI APIC Table: <RCC RCCNILE > ACPI-0698: *** Warning: Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [IO__] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [SB__] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [ICNT] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [ACPI] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [OSB4] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [BIOS] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0698: *** Warning: Type override - [CMOS] had invalid type (Integer) for Scope operator, changed to (Scope) MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <RCC RCCNILE> on motherboard acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LN00> on acpi0 pci_link1: <ACPI PCI Link LN01> irq 0 on acpi0 pci_link2: <ACPI PCI Link LN02> irq 0 on acpi0 pci_link3: <ACPI PCI Link LN03> irq 0 on acpi0 pci_link4: <ACPI PCI Link LN04> irq 0 on acpi0 pci_link5: <ACPI PCI Link LN05> irq 0 on acpi0 pci_link6: <ACPI PCI Link LN06> irq 0 on acpi0 pci_link7: <ACPI PCI Link LN07> irq 0 on acpi0 pci_link8: <ACPI PCI Link LN08> irq 0 on acpi0 pci_link9: <ACPI PCI Link LN09> irq 0 on acpi0 pci_link10: <ACPI PCI Link LN10> irq 0 on acpi0 pci_link11: <ACPI PCI Link LN11> irq 0 on acpi0 pci_link12: <ACPI PCI Link LN12> on acpi0 pci_link13: <ACPI PCI Link LN13> irq 0 on acpi0 pci_link14: <ACPI PCI Link LN14> irq 0 on acpi0 pci_link15: <ACPI PCI Link LN15> on acpi0 pci_link16: <ACPI PCI Link LNUS> irq 10 on acpi0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <display, VGA> at device 1.0 (no driver attached) fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd800-0xd83f mem 0xfeaf6000-0xfeaf6fff,0xfe900000-0xfe9fffff irq 31 at device 6.0 on pci0 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:30:48:22:04:19 isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 15.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfeaf7000-0xfeaf7fff irq 10 at device 15.2 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pcib1: <ACPI Host-PCI bridge> on acpi0 pci1: <ACPI PCI bus> on pcib1 ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0xe800-0xe8ff mem 0xfebff000-0xfebfffff irq 28 at device 3.0 on pci1 ahc0: [GIANT-LOCKED] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model MouseMan+, device ID 0 fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1399332991 Hz quality 800 Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST39175LW 0001> Fixed Direct Access SCSI-2 device da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) cd0 at ahc0 bus 0 target 5 lun 0 cd0: <NEC CD-ROM DRIVE:462 1.14> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 15) cd0: cd present [282403 x 2048 byte records] Trying to mount root from ufs:/dev/da0s1aReceived on Mon Sep 05 2005 - 00:55:17 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:42 UTC