Hi, In the past FreeBSD 6-CURRENT and RELENG_6 would (and still do) hang when booting on a Tyan Thunder s2895 mobo with integrated LSI 1030 SCSI controller, just after resetting the scsi bus and scanning for disks. One workaround was to not use SCSI disks, and instead use SATA. Another workaround was to go into the BIOS config and do the following: o disable Slave MAC (second nVidia ethernet) o disable IEEE 1394 o enable bus master on the SCSI controller In this configuration, RELENG_6/amd64 runs like a champ on this mobo. Unfortunately, my attempts to boot with 7-CURRENT, either the snapshot 8/06 CD or a version build from source supped as of 8/15/06, have met with complete failure. A complete dmesg is included below. The only way I can get 7-CURRENT to boot is by disabling the SCSI controller. However, this box has a nice SCSI backplane and plenty of SCSI disks, and no room for SATA. o The same configuration that works for RELENG_6 doesn't work for CURRENT. I have gone even further and disabled just about everything that the system needs to boot except for the SCSI controller and it still hangs. o The SCSI controller is running the latest BIOS and firmware. o The problem occurs regardless of the version of BIOS that is on this mobo (including beta versions)--I have tested several versions. o I have tried both an amd64 kernel and an i386 kernel, both with the same result. o I built a custom, minimal kernel (using a non-mpt amd64 build machine), that also failed on the s2895. Any ideas? It appears that the driver either isn't understanding this card's handshake registers or it's not able to read the responses to SCSI commands. Here's the dmesg. Let me know if there is other information that I can provide. I'd like to test the nfe driver on the nVidia ethernet interfaces on this box, but I can't boot it under these circumstances. michael Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 7.0-CURRENT #2: Fri Aug 18 23:19:57 PDT 2006 michael_at_ncs-211.net.berkeley.edu:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Opteron(tm) Processor 250 (2411.12-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0xf5a Stepping = 10 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow!+,3DNow!> usable memory = 3208052736 (3059 MB) avail memory = 3102224384 (2958 MB) ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 1.1> irqs 0-23 on motherboard ioapic1 <Version 1.1> irqs 24-27 on motherboard ioapic2 <Version 1.1> irqs 28-31 on motherboard kbd0 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <PTLTD RSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xc8000000-0xc8000fff irq 20 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 10 ports with 10 removable, self powered atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1400-0x140f at device 6.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pci1: <ACPI PCI bus> on pcib1 nve0: <NVIDIA nForce MCP8 Networking Adapter> port 0x1410-0x1417 mem 0xc8001000-0xc8001fff irq 21 at device 10.0 on pci0 nve0: Ethernet address 00:e0:81:54:a9:26 miibus0: <MII bus> on nve0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nve0: Ethernet address: 00:e0:81:54:a9:26 pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0 pci2: <ACPI PCI bus> on pcib2 vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xd0000000-0xd7ffffff,0xc8200000-0xc820ffff irq 16 at device 0.0 on pci2 vgapci1: <VGA-compatible display> mem 0xc8210000-0xc821ffff at device 0.1 on pci2 pcib3: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci8: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 10.0 on pci8 pci9: <ACPI PCI bus> on pcib4 em0: <Intel(R) PRO/1000 Network Connection Version - 6.1.4> port 0x3000-0x303f mem 0xd8140000-0xd815ffff,0xd8100000-0xd813ffff irq 24 at device 4.0 on pci9 em0: Ethernet address: 00:04:23:b5:d8:7a em0: [FAST] em1: <Intel(R) PRO/1000 Network Connection Version - 6.1.4> port 0x3040-0x307f mem 0xd8160000-0xd817ffff,0xd8180000-0xd81bffff irq 25 at device 4.1 on pci9 em1: Ethernet address: 00:04:23:b5:d8:7b em1: [FAST] pci8: <base peripheral, interrupt controller> at device 10.1 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 11.0 on pci8 pci10: <ACPI PCI bus> on pcib5 em2: <Intel(R) PRO/1000 Network Connection Version - 6.1.4> port 0x4800-0x483f mem 0xd8240000-0xd825ffff,0xd8200000-0xd823ffff irq 28 at device 4.0 on pci10 em2: Ethernet address: 00:04:23:b6:2c:c4 em2: [FAST] em3: <Intel(R) PRO/1000 Network Connection Version - 6.1.4> port 0x4840-0x487f mem 0xd8260000-0xd827ffff,0xd8280000-0xd82bffff irq 29 at device 4.1 on pci10 em3: Ethernet address: 00:04:23:b6:2c:c5 em3: [FAST] mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x4000-0x40ff mem 0xd8400000-0xd84fffff,0xd8300000-0xd83fffff irq 30 at device 6.0 on pci10 mpt0: [GIANT-LOCKED] mpt0: MPI Version=1.2.14.0 mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x4400-0x44ff mem 0xd8600000-0xd86fffff,0xd8500000-0xd85fffff irq 31 at device 6.1 on pci10 mpt1: [GIANT-LOCKED] mpt1: MPI Version=1.2.14.0 mpt1: mpt_wait_req(4) timed out mpt1: read_cfg_header timed out mpt1: mpt_wait_req(6) timed out mpt1: port 0 enable timed out mpt1: failed to enable port 0 mpt1: personality mpt_core attached but would not enable (6) pci8: <base peripheral, interrupt controller> at device 11.1 (no driver attached) pcib6: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci128: <ACPI PCI bus> on pcib6 pci128: <memory> at device 0.0 (no driver attached) pci128: <memory> at device 1.0 (no driver attached) pcib7: <ACPI PCI-PCI bridge> at device 14.0 on pci128 pci129: <ACPI PCI bus> on pcib7 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console sio0: [FAST] fdc0: <floppy drive controller> port 0-0x5,0 on acpi0 fdc0: cannot reserve interrupt line device_attach: fdc0 attach returned 6 fdc0: <floppy drive controller> port 0-0x5,0 on acpi0 fdc0: cannot reserve interrupt line device_attach: fdc0 attach returned 6 ppc0: <Parallel port> port 0-0x7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: cannot reserve interrupt, failed. lpt0: <Printer> on ppbus0 lpt0: Polled port ppi0: <Parallel I/O> on ppbus0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xd0fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec mpt0: Default Handler Called: req=0xffffffff80e48ff8:94 reply_descriptor=dc913900 frame=0xffffffffacc7a200 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a200 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x0003005d mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49050:95 reply_descriptor=dc913980 frame=0xffffffffacc7a300 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a300 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x0003005e mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e490a8:96 reply_descriptor=dc913a00 frame=0xffffffffacc7a400 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a400 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x0003005f mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49100:97 reply_descriptor=dc913a80 frame=0xffffffffacc7a500 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a500 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x00030060 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49158:98 reply_descriptor=dc913b00 frame=0xffffffffacc7a600 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a600 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x00030061 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e491b0:99 reply_descriptor=dc913b80 frame=0xffffffffacc7a700 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a700 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x00030062 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49208:100 reply_descriptor=dc913c00 frame=0xffffffffacc7a800 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a800 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x00030063 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49260:101 reply_descriptor=dc913c80 frame=0xffffffffacc7a900 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a900 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x00030064 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e492b8:102 reply_descriptor=dc913d00 frame=0xffffffffacc7aa00 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7aa00 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x00030065 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49310:103 reply_descriptor=dc913d80 frame=0xffffffffacc7ab00 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7ab00 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x00030066 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49368:104 reply_descriptor=dc913e00 frame=0xffffffffacc7ac00 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7ac00 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x00030067 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e493c0:105 reply_descriptor=dc913e80 frame=0xffffffffacc7ad00 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7ad00 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x00030068 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49418:106 reply_descriptor=dc913f00 frame=0xffffffffacc7ae00 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7ae00 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x00030069 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49470:107 reply_descriptor=dc913800 frame=0xffffffffacc7a000 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a000 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x0003006a mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e494c8:108 reply_descriptor=dc913880 frame=0xffffffffacc7a100 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a100 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x0003006b mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49520:109 reply_descriptor=dc913900 frame=0xffffffffacc7a200 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a200 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x0003006c mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49578:110 reply_descriptor=dc913980 frame=0xffffffffacc7a300 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a300 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x0003006d mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e495d0:111 reply_descriptor=dc913a00 frame=0xffffffffacc7a400 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a400 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x0003006e mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49628:112 reply_descriptor=dc913a80 frame=0xffffffffacc7a500 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a500 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x0003006f mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49680:113 reply_descriptor=dc913b00 frame=0xffffffffacc7a600 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a600 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x00030070 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e496d8:114 reply_descriptor=dc913b80 frame=0xffffffffacc7a700 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a700 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x00030071 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49730:115 reply_descriptor=dc913c00 frame=0xffffffffacc7a800 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a800 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x00030072 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49788:116 reply_descriptor=dc913c80 frame=0xffffffffacc7a900 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a900 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x00030073 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e497e0:117 reply_descriptor=dc913d00 frame=0xffffffffacc7aa00 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7aa00 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x00030074 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49838:118 reply_descriptor=dc913d80 frame=0xffffffffacc7ab00 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7ab00 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x00030075 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49890:119 reply_descriptor=dc913e00 frame=0xffffffffacc7ac00 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7ac00 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x00030076 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e498e8:120 reply_descriptor=dc913e80 frame=0xffffffffacc7ad00 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7ad00 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x00030077 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49940:121 reply_descriptor=dc913f00 frame=0xffffffffacc7ae00 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7ae00 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x00030078 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49998:122 reply_descriptor=dc913800 frame=0xffffffffacc7a000 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a000 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x00030079 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e499f0:123 reply_descriptor=dc913880 frame=0xffffffffacc7a100 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a100 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x0003007a mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49a48:124 reply_descriptor=dc913900 frame=0xffffffffacc7a200 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a200 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x0003007b mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49aa0:125 reply_descriptor=dc913980 frame=0xffffffffacc7a300 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffffacc7a300 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x05 MsgFlags 0x00 MsgContext 0x0003007c mpt0: Reply Frame Ignored em1: link state changed to UP em2: link state changed to UP em3: link state changed to UP acd0: CDROM <SR244W/T01A> at ata0-master UDMA33 Waiting 5 seconds for SCSI devices to settle mpt0: Default Handler Called: req=0xffffffff80e47160:126 reply_descriptor=dc913a00 frame=0xffffffffacc7a400 mpt0: Address Reply: SCSI Task Management Reply _at_ 0xffffffffacc7a400 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x06 MsgFlags 0x00 MsgContext 0x00020004 mpt0: Reply Frame Ignored mpt0: mpt_wait_req(1) timed out mpt0: mpt_bus_reset: Reset timed-out. Resetting controller. mpt0: Default Handler Called: req=0xffffffff80e47160:126 reply_descriptor=20004 frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Task Management Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00020004 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49aa0:125 reply_descriptor=3007c frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x0003007c mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49a48:124 reply_descriptor=3007b frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x0003007b mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e499f0:123 reply_descriptor=3007a frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x0003007a mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49998:122 reply_descriptor=30079 frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00030079 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49940:121 reply_descriptor=30078 frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00030078 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e498e8:120 reply_descriptor=30077 frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00030077 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49890:119 reply_descriptor=30076 frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00030076 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49838:118 reply_descriptor=30075 frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00030075 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e497e0:117 reply_descriptor=30074 frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00030074 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49788:116 reply_descriptor=30073 frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00030073 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49730:115 reply_descriptor=30072 frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00030072 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e496d8:114 reply_descriptor=30071 frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00030071 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49680:113 reply_descriptor=30070 frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00030070 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49628:112 reply_descriptor=3006f frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x0003006f mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e495d0:111 reply_descriptor=3006e frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x0003006e mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49578:110 reply_descriptor=3006d frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x0003006d mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49520:109 reply_descriptor=3006c frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x0003006c mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e494c8:108 reply_descriptor=3006b frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x0003006b mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49470:107 reply_descriptor=3006a frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x0003006a mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49418:106 reply_descriptor=30069 frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00030069 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e493c0:105 reply_descriptor=30068 frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00030068 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49368:104 reply_descriptor=30067 frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00030067 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49310:103 reply_descriptor=30066 frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00030066 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e492b8:102 reply_descriptor=30065 frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00030065 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49260:101 reply_descriptor=30064 frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00030064 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49208:100 reply_descriptor=30063 frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00030063 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e491b0:99 reply_descriptor=30062 frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00030062 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49158:98 reply_descriptor=30061 frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00030061 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49100:97 reply_descriptor=30060 frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00030060 mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e490a8:96 reply_descriptor=3005f frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x0003005f mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e49050:95 reply_descriptor=3005e frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x0003005e mpt0: Reply Frame Ignored mpt0: Default Handler Called: req=0xffffffff80e48ff8:94 reply_descriptor=3005d frame=0xffffffff80b49b10 mpt0: Address Reply: SCSI Target Command Buffer Reply _at_ 0xffffffff80b49b10 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x0003005d mpt0: Reply Frame Ignored mpt0: mpt_cam_event: 0x0 mpt0: Default Handler Called: req=0xffffffff80e49ba8:129 reply_descriptor=1007f frame=0 mpt0: Reply Frame Ignored mpt0: request 0xffffffff80e49ba8:129 timed out for ccb 0xffffff00b7d81800 (req->ccb 0xffffff00b7d81800) mpt0: attempting to abort req 0xffffffff80e49ba8:129 function 0 mpt0: Default Handler Called: req=0xffffffff80e47160:130 reply_descriptor=dc913900 frame=0xffffffffacc7a200 mpt0: Address Reply: SCSI Task Management Reply _at_ 0xffffffffacc7a200 IOC Status Success IOCLogInfo 0x00000000 MsgLength 0x06 MsgFlags 0x00 MsgContext 0x00020004 mpt0: Reply Frame Ignored mpt0: mpt_wait_req(1) timed out mpt0: mpt_recover_commands: abort timed-out. Resetting controller mpt0: Default Handler Called: req=0xffffffff80e47160:130 reply_descriptor=20004 frame=0xffffffffac25db90 mpt0: Address Reply: SCSI Task Management Reply _at_ 0xffffffffac25db90 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x00020004 mpt0: Reply Frame Ignored mpt0: mpt_cam_event: 0x0 mpt0: Default Handler Called: req=0xffffffff80e49ba8:129 reply_descriptor=1007f frame=0xffffffffac25db70 mpt0: Address Reply: SCSI IO Request Reply _at_ 0xffffffffac25db70 IOC Status IOC: Invalid State IOCLogInfo 0x00000000 MsgLength 0x14 MsgFlags 0x00 MsgContext 0x0001007f Bus: 0 TargetID 0 CDBLength 0 SCSI Status: OK SCSI State: (0x00000000) TransferCnt 0xffffffff SenseCnt 0x803104e7 ResponseInfo 0xffffffff mpt0: Reply Frame IgnoredReceived on Tue Aug 22 2006 - 20:40:03 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:59 UTC