Re: CURRENT freezes on Laitude D520

From: yal <yal_at_yal.hopto.org>
Date: Sat, 9 Dec 2006 22:52:36 +0100 (CET)
On Sat, December 9, 2006 22:10, Andrew Pantyukhin wrote:

> Do we have to forget about IPSEC+IPv6?
>

This is the dmesg of my latitude D520 with today's sources:

Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #47: Sat Dec  9 21:39:13 CET 2006
    root_at_d520.unime.lan:/usr/obj/usr/src/sys/LATITUDE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU           T2300  _at_ 1.66GHz (1664.45-MHz
686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6e8  Stepping = 8
  Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xc189<SSE3,MON,EST,TM2,XTPR,<b15>>
  AMD Features=0x100000<NX>
  Cores per package: 2
real memory  = 1064120320 (1014 MB)
avail memory = 1031966720 (984 MB)
ACPI APIC Table: <DELL   M07    >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <DELL M07    > on motherboard
Timecounter "HPET" frequency 14318180 Hz quality 2000
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0

acpi_throttle1: <ACPI CPU Throttling> on cpu1       < ===
acpi_throttle1: failed to attach P_CNT              < ===
device_attach: acpi_throttle1 attach returned 6     < ===
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xeff8-0xefff mem
0xeff00000-0xeff7ffff,0xd0000000-0xdfffffff,0xefec0000-0xefefffff irq 16
at device 2.0 on pci0
agp0: <Intel 82945GM (945GM GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
drm0: <Intel i945GM> on vgapci0
info: [drm] AGP at 0xeff00000 0MB
info: [drm] Initialized i915 1.5.0 20060119
vgapci1: <VGA-compatible display> mem 0xeff80000-0xefffffff at device 2.1
on pci0
pcm0: <Intel 82801G High Definition Audio Controller> mem
0xefebc000-0xefebffff irq 21 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci11: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci12: <ACPI PCI bus> on pcib2
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xefdff000-0xefdfffff irq 17 at
device 0.0 on pci12wpi0: using obsoleted if_watchdog interface
wpi0: Ethernet address: 00:18:de:6a:3a:1c
uhci0: <UHCI (generic) USB controller> port 0xbf80-0xbf9f irq 20 at device
29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xbf60-0xbf7f irq 21 at device
29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xbf40-0xbf5f irq 22 at device
29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xbf20-0xbf3f irq 23 at device
29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem
0xffa80000-0xffa803ff irq 20 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
uhub5: <vendor 0x413c product 0xa005, class 9/0, rev 2.00/50.18, addr 2>
on uhub4
uhub5: multiple transaction translators
uhub5: 4 ports with 0 removable, self powered
ugen0: <vendor 0x413c product 0x8103, class 224/1, rev 2.00/24.22, addr 3>
on uhub5
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib3
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xefcfe000-0xefcfffff irq 17
at device 0.0 on pci2
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: using obsoleted if_watchdog interface
bfe0: Ethernet address: 00:15:c5:b6:b4:dc
cbb0: <PCI-CardBus Bridge> at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem
0xefcfd000-0xefcfdfff,0xefcfc800-0xefcfcfff irq 19 at device 1.4 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 46:4f:c0:00:1a:7e:3c:50
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 46:4f:c0:7e:3c:50
fwe0: Ethernet address: 46:4f:c0:7e:3c:50
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7M SATA300 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf irq 17 at device 31.2 on
pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on
acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FAST]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff pnpid
ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ad0: 76319MB <Hitachi HTS541080G9SA00 MB4OC60R> at ata0-master SATA150
acd0: CDRW <HL-DT-STCD-RW/DVD-ROM GCC-4244N/B103> at ata1-master UDMA33
pcm0: <HDA Codec: Sigmatel STAC9220>
pcm0: <HDA Driver Revision: 20061203_0035>
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s2a

yal.
Received on Sat Dec 09 2006 - 21:03:46 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:03 UTC