Well, with this change, my machine starts to boot, but then stops part way through... It gets to ntpdate and then stops.. I didn't let it run very long, but it apparently was running VERY slowly.. After I set the cx_lowest back to HIGH, the machine booted perfectly fine (less than a minute from kernel load to login prompt).. Could this be a problem of not starting powerd or something that makes sure we don't go into a low power state when running? Power savings are good, but making FreeBSD not bootable isn't... I waited over five minutes.. It's almost like interrupts stop working... I don't get link state changed to UP (from ethernet) till I hit ctrl-t on the serial console port, and after a few times, the machine appears to be wedged, and the last messages are: load: 0.86 not a controlling terminal lo This last boot stopped after Starting syslogd. The other couple times the last message got a bit farther... Sources are from a day or two ago... dmesg from the failed boot: /boot/kernel/acpi.ko text=0x43a74 data=0x23e0+0xff0 syms=[0x4+0x7bb0+0x4+0xa82b] GDB: debug ports: dcons GDB: current port: dcons KDB: debugger backends: ddb gdb KDB: current backend: ddb Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 7.0-CURRENT #0: Sat Mar 11 23:27:06 PST 2006 jmg_at_carbon.funkthat.com:/a/obj/usr/home/jmg/p4/world/src/sys/carbon WARNING: WITNESS option enabled, expect reduced performance. MEMGUARD DEBUGGING ALLOCATOR INITIALIZED: MEMGUARD map base: 0xc2969000 MEMGUARD map limit: 0xc356e000 MEMGUARD map size: 12603392 (Bytes) Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) XP 1800+ (1533.40-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow> real memory = 394199040 (375 MB) avail memory = 376193024 (358 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <SOYO AWRDACPI> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x407f,0x4080-0x40ff,0x5000-0x500f,0x6000-0x607f on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA 8361 (KLE133) host to PCI bridge> on hostb0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 vgapci0: <VGA-compatible display> mem 0xe5800000-0xe5ffffff,0xe6000000-0xe601ffff,0xe5000000-0xe57fffff irq 12 at device 0.0 on pci1 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686B UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc000-0xc00f at device 7.1 on pci0 atapci0: Correcting VIA config for southbridge data corruption bug ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 11 at device 7.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 11 at device 7.3 on pci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered pci0: <bridge> at device 7.4 (no driver attached) pci0: <multimedia, audio> at device 7.5 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xd800-0xd83f mem 0xe7000000-0xe701ffff irq 10 at device 9.0 on pci0 em0: Ethernet address: 00:07:e9:0d:ad:06 em0: [FAST] fwohci0: <VIA Fire II (VT6306)> port 0xdc00-0xdc7f mem 0xe7020000-0xe70207ff irq 5 at device 10.0 on pci0 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:11:06:00:00:00:3a:3b fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x16f66000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:06:00:3a:3b fwe0: Ethernet address: 02:11:06:00:3a:3b fwe0: if_start running deferred for Giant fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc1, gen=1, CYCLEMASTER mode firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me) firewire0: bus manager 0 pci0: <multimedia, video> at device 11.0 (no driver attached) pci0: <multimedia> at device 11.1 (no driver attached) rl0: <RealTek 8139 10/100BaseTX> port 0xe000-0xe0ff mem 0xe7023000-0xe70230ff irq 11 at device 12.0 on pci0 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:50:2c:01:84:a6 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x30 on acpi0 sio0: type 16550A, console sio0: [FAST] sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FAST] ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1533398944 Hz quality 800 Timecounters tick every 1.000 msec Unknown service addr 0xffff:0xf0000004 WREQQ(0) src=0xffc0 data=100 em0: link state changed to UP ad0: 43979MB <IBM DTLA-307045 TX6OA60A> at ata0-master UDMA100 firewire0: New S400 device ID:00110600000039fd ad1: 58644MB <IC35L060AVER07 0 ER6OA46A> at ata1-master UDMA100 Trying to mount root from ufs:/dev/ad0s4a em0: link state changed to DOWN rl0: link state changed to DOWN leoma0: link state changed to UP d: 0.86 not a controlling terminal rl0: link state changed to UP load: 0.86 not a controlling terminal load: 0.86 not a controlling terminal load: 0.86 not a controlling terminal lo -- John-Mark Gurney Voice: +1 415 225 5579 "All that I will do, has been done, All that I have, has not."Received on Sun Mar 12 2006 - 22:56:50 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:53 UTC