Hi, I can't reproduce the problem. Everything is exactly the same, but I get no timeouts and the nic seems to work without any problems. Kind regards, Fredrik Widlund Fredrik Widlund wrote: > Hi, > > An update, right now the BCE nic seems to work, I'm not sure exactly why > yet. I'm attaching the dmesg however. > > SAS adapter is the PERC 5I, which is handled by the MPT driver in > 6.2-Beta2. I'll continue to look at this. There are some unhandled > events (0x12, 0x16), but these might not be needed. > > [mpi_ioc.h] > #define MPI_EVENT_SAS_PHY_LINK_STATUS (0x00000012) > ... > #define MPI_EVENT_SAS_DISCOVERY (0x00000016) > > [dmesg mpt part] > mpt0: <LSILogic SAS/SATA Adapter> port 0xec00-0xecff mem > 0xfc7fc000-0xfc7fffff,0xfc7e0000-0xfc7effff irq 64 at device 8.0 on pci2 > mpt0: [GIANT-LOCKED] > mpt0: MPI Version=1.5.12.0 > mpt0: mpt_cam_event: 0x16 > mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). > mpt0: mpt_cam_event: 0x12 > mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required). > mpt0: mpt_cam_event: 0x16 > mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). > > Kind regards, > Fredrik Widlund > > Fredrik Widlund wrote: > >> Hi, >> >> I'm trying to get FreeBSD working on Dell 1950 (and 2950), which is >> vital since it's no longer possible to buy 1850/2850 units here. >> >> Hardware: >> PE1950 Xeon 5130, 2GB 667MHz >> SAS 5I >> PERC5E >> >> 6.1-RELEASE: not possible since SAS drives aren't found. >> 6.2-BETA2: bce interfaces does not work at all, "watchdog timeout >> occured" every other second, and _no_ connectivity. >> >> We are also having problems with some PE1850 failing from time to time >> with "watchdog timeout" hangs, and have had to debug.mpsafenet=0 these. >> >> How can we help solve this issue? It would really be a pity to be >> forced to leave FreeBSD but we really can't afford to replace our >> choice of hardware platform. >> >> Kind regards, >> Fredrik Widlund >> >> >> >> >> >> _______________________________________________ >> freebsd-current_at_freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-current >> To unsubscribe, send any mail to >> "freebsd-current-unsubscribe_at_freebsd.org" >> > > > ------------------------------------------------------------------------ > > Copyright (c) 1992-2006 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 6.2-BETA2 #0: Mon Oct 2 03:32:44 UTC 2006 > root_at_opus.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(R) CPU 5130 _at_ 2.00GHz (1995.01-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS, > HTT,TM,PBE> > Features2=0x4e33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,<b9>,CX16,<b14>,<b15>,<b18>> > AMD Features=0x20100000<NX,LM> > AMD Features2=0x1<LAHF> > Cores per package: 2 > real memory = 2147123200 (2047 MB) > avail memory = 2096009216 (1998 MB) > ACPI APIC Table: <DELL PE_SC3 > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0: Changing APIC ID to 2 > ioapic1: Changing APIC ID to 3 > ioapic1: WARNING: intbase 64 != expected base 24 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > ioapic1 <Version 2.0> irqs 64-87 on motherboard > kbd1 at kbdmux0 > ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > acpi0: <DELL PE_SC3> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 > pci5: <ACPI PCI bus> on pcib1 > pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci5 > pci6: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci6 > pci7: <ACPI PCI bus> on pcib3 > pcib4: <PCI-PCI bridge> at device 0.0 on pci7 > pci8: <PCI bus> on pcib4 > bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem 0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci8 > bce0: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz > miibus0: <MII bus> on bce0 > brgphy0: <BCM5708C 10/100/1000baseTX PHY> on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto > bce0: Ethernet address: 00:13:72:fb:cb:16 > pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci6 > pci9: <ACPI PCI bus> on pcib5 > pcib6: <PCI-PCI bridge> at device 0.3 on pci5 > pci10: <PCI bus> on pcib6 > pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0 > pci1: <ACPI PCI bus> on pcib7 > pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci1 > pci2: <ACPI PCI bus> on pcib8 > mpt0: <LSILogic SAS/SATA Adapter> port 0xec00-0xecff mem 0xfc7fc000-0xfc7fffff,0xfc7e0000-0xfc7effff irq 64 at device 8.0 on pci2 > mpt0: [GIANT-LOCKED] > mpt0: MPI Version=1.5.12.0 > mpt0: mpt_cam_event: 0x16 > mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). > mpt0: mpt_cam_event: 0x12 > mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required). > mpt0: mpt_cam_event: 0x16 > mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). > pcib9: <ACPI PCI-PCI bridge> at device 4.0 on pci0 > pci11: <ACPI PCI bus> on pcib9 > pcib10: <PCI-PCI bridge> at device 5.0 on pci0 > pci12: <PCI bus> on pcib10 > pcib11: <ACPI PCI-PCI bridge> at device 6.0 on pci0 > pci13: <ACPI PCI bus> on pcib11 > pcib12: <PCI-PCI bridge> at device 0.0 on pci13 > pci14: <PCI bus> on pcib12 > mfi0: <Dell PERC 5/i> mem 0xd80f0000-0xd80fffff,0xfc4e0000-0xfc4fffff irq 18 at device 14.0 on pci14 > pcib13: <PCI-PCI bridge> at device 0.2 on pci13 > pci15: <PCI bus> on pcib13 > pcib14: <PCI-PCI bridge> at device 7.0 on pci0 > pci16: <PCI bus> on pcib14 > pcib15: <ACPI PCI-PCI bridge> at device 28.0 on pci0 > pci3: <ACPI PCI bus> on pcib15 > pcib16: <PCI-PCI bridge> at device 0.0 on pci3 > pci4: <PCI bus> on pcib16 > bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci4 > bce1: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz > miibus1: <MII bus> on bce1 > brgphy1: <BCM5708C 10/100/1000baseTX PHY> on miibus1 > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto > bce1: Ethernet address: 00:13:72:fb:cb:14 > uhci0: <UHCI (generic) USB controller> port 0xcce0-0xccff irq 21 at device 29.0 on pci0 > uhci0: [GIANT-LOCKED] > usb0: <UHCI (generic) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <UHCI (generic) USB controller> port 0xccc0-0xccdf irq 20 at device 29.1 on pci0 > uhci1: [GIANT-LOCKED] > usb1: <UHCI (generic) USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <UHCI (generic) USB controller> port 0xcca0-0xccbf irq 21 at device 29.2 on pci0 > uhci2: [GIANT-LOCKED] > usb2: <UHCI (generic) USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfc900000-0xfc9003ff irq 21 at device 29.7 on pci0 > ehci0: [GIANT-LOCKED] > usb3: EHCI version 1.0 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2 > usb3: <EHCI (generic) USB 2.0 controller> on ehci0 > usb3: USB revision 2.0 > uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub3: 6 ports with 6 removable, self powered > uhub4: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2 > uhub4: multiple transaction translators > uhub4: 4 ports with 4 removable, self powered > pcib17: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci17: <ACPI PCI bus> on pcib17 > pci17: <display, VGA> at device 13.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > fdc0: does not respond > device_attach: fdc0 attach returned 6 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > fdc0: does not respond > device_attach: fdc0 attach returned 6 > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xcf000-0xd07ff,0xec000-0xeffff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > ppc0: parallel port not found. > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > ums0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 2, iclass 3/1 > ums0: 3 buttons and Z dir. > ukbd0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/1 > kbd2 at ukbd0 > uhid0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/1 > Timecounters tick every 1.000 msec > acd0: CDROM <TEAC CD-ROM CD-224E-N/3.AB> at ata0-master UDMA33 > mfi0: 68 - PCI 0x041028 0x0415 0x041028 0x041f01: Firmware initialization started (PCI ID 0015/1028/1f01/1028) > mfi0: 69 - Type 18: Firmware version 1.00.01-0081 > mfi0: 70 - Battery Present > mfi0: 71 - Adapter ticks 213277741 elapsed 54s: Time established as 10/04/06 11:49:01; (54 seconds since power on) > ses0 at mpt0 bus 0 target 8 lun 0 > ses0: <DP BACKPLANE 1.00> Fixed Enclosure Services SCSI-5 device > ses0: 300.000MB/s transfers > ses0: SCSI-3 SES Device > SMP: AP CPU #1 Launched! > da0 at mpt0 bus 0 target 0 lun 0 > da0: <FUJITSU MAX3036RC D206> Fixed Direct Access SCSI-3 device > da0: 300.000MB/s transfers, Tagged Queueing Enabled > da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) > Trying to mount root from ufs:/dev/da0s1a > mfi0: 72 - Battery temperature is normal > mfi0: 73 - Battery started charging > mfi0: 74 - Current capacity of the battery is above threshold > bce0: link state changed to DOWN > bce0: link state changed to UP > ------------------------------------------------------------------------ > > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"Received on Fri Oct 06 2006 - 12:33:48 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:01 UTC