Hi, Suddenly the problem occured again. We are running the same setup as below, but with debug.mpsafenet=0, but it didn't help. This is indeed a showstopper for us, we are moving all our dell 1950 out of production environment until we can solve this issue. Any help would be greatly appreciated. Kind regards, Fredrik Widlund bce0: /usr/src/sys/dev/bce/if_bce.c(5032): Watchdog timeout occurred, resetting! bce0: link state changed to DOWN bce0: link state changed to UP bce0: /usr/src/sys/dev/bce/if_bce.c(5032): Watchdog timeout occurred, resetting! bce0: link state changed to DOWN bce0: link state changed to UP [repeat 30 times] # vmstat -i interrupt total rate irq14: ata0 47 0 irq16: bce0 bce1 3019 5 irq18: mfi0 123 0 irq21: uhci0 uhci+ 6 0 irq64: mpt0 1214 2 cpu0: timer 1118344 1997 Total 1122753 2004 Fredrik Widlund wrote: > Hi, > > I can't reproduce the problem. Everything is exactly the same, but I get > no timeouts and the nic seems to work without any problems. > > Kind regards, > Fredrik Widlund > > > Fredrik Widlund wrote: > >> Hi, >> >> An update, right now the BCE nic seems to work, I'm not sure exactly why >> yet. I'm attaching the dmesg however. >> >> SAS adapter is the PERC 5I, which is handled by the MPT driver in >> 6.2-Beta2. I'll continue to look at this. There are some unhandled >> events (0x12, 0x16), but these might not be needed. >> >> [mpi_ioc.h] >> #define MPI_EVENT_SAS_PHY_LINK_STATUS (0x00000012) >> ... >> #define MPI_EVENT_SAS_DISCOVERY (0x00000016) >> >> [dmesg mpt part] >> mpt0: <LSILogic SAS/SATA Adapter> port 0xec00-0xecff mem >> 0xfc7fc000-0xfc7fffff,0xfc7e0000-0xfc7effff irq 64 at device 8.0 on pci2 >> mpt0: [GIANT-LOCKED] >> mpt0: MPI Version=1.5.12.0 >> mpt0: mpt_cam_event: 0x16 >> mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). >> mpt0: mpt_cam_event: 0x12 >> mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required). >> mpt0: mpt_cam_event: 0x16 >> mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). >> >> Kind regards, >> Fredrik Widlund >> >> Fredrik Widlund wrote: >> >> >>> Hi, >>> >>> I'm trying to get FreeBSD working on Dell 1950 (and 2950), which is >>> vital since it's no longer possible to buy 1850/2850 units here. >>> >>> Hardware: >>> PE1950 Xeon 5130, 2GB 667MHz >>> SAS 5I >>> PERC5E >>> >>> 6.1-RELEASE: not possible since SAS drives aren't found. >>> 6.2-BETA2: bce interfaces does not work at all, "watchdog timeout >>> occured" every other second, and _no_ connectivity. >>> >>> We are also having problems with some PE1850 failing from time to time >>> with "watchdog timeout" hangs, and have had to debug.mpsafenet=0 these. >>> >>> How can we help solve this issue? It would really be a pity to be >>> forced to leave FreeBSD but we really can't afford to replace our >>> choice of hardware platform. >>> >>> Kind regards, >>> Fredrik Widlund >>> >>> >>> >>> >>> >>> _______________________________________________ >>> freebsd-current_at_freebsd.org mailing list >>> http://lists.freebsd.org/mailman/listinfo/freebsd-current >>> To unsubscribe, send any mail to >>> "freebsd-current-unsubscribe_at_freebsd.org" >>> >>> >> >> ------------------------------------------------------------------------ >> >> Copyright (c) 1992-2006 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 6.2-BETA2 #0: Mon Oct 2 03:32:44 UTC 2006 >> root_at_opus.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP >> Timecounter "i8254" frequency 1193182 Hz quality 0 >> CPU: Intel(R) Xeon(R) CPU 5130 _at_ 2.00GHz (1995.01-MHz 686-class CPU) >> Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 >> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS, >> HTT,TM,PBE> >> Features2=0x4e33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,<b9>,CX16,<b14>,<b15>,<b18>> >> AMD Features=0x20100000<NX,LM> >> AMD Features2=0x1<LAHF> >> Cores per package: 2 >> real memory = 2147123200 (2047 MB) >> avail memory = 2096009216 (1998 MB) >> ACPI APIC Table: <DELL PE_SC3 > >> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs >> cpu0 (BSP): APIC ID: 0 >> cpu1 (AP): APIC ID: 1 >> ioapic0: Changing APIC ID to 2 >> ioapic1: Changing APIC ID to 3 >> ioapic1: WARNING: intbase 64 != expected base 24 >> ioapic0 <Version 2.0> irqs 0-23 on motherboard >> ioapic1 <Version 2.0> irqs 64-87 on motherboard >> kbd1 at kbdmux0 >> ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) >> acpi0: <DELL PE_SC3> on motherboard >> acpi0: Power Button (fixed) >> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 >> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 >> cpu0: <ACPI CPU> on acpi0 >> cpu1: <ACPI CPU> on acpi0 >> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >> pci0: <ACPI PCI bus> on pcib0 >> pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 >> pci5: <ACPI PCI bus> on pcib1 >> pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci5 >> pci6: <ACPI PCI bus> on pcib2 >> pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci6 >> pci7: <ACPI PCI bus> on pcib3 >> pcib4: <PCI-PCI bridge> at device 0.0 on pci7 >> pci8: <PCI bus> on pcib4 >> bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem 0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci8 >> bce0: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz >> miibus0: <MII bus> on bce0 >> brgphy0: <BCM5708C 10/100/1000baseTX PHY> on miibus0 >> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto >> bce0: Ethernet address: 00:13:72:fb:cb:16 >> pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci6 >> pci9: <ACPI PCI bus> on pcib5 >> pcib6: <PCI-PCI bridge> at device 0.3 on pci5 >> pci10: <PCI bus> on pcib6 >> pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0 >> pci1: <ACPI PCI bus> on pcib7 >> pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci1 >> pci2: <ACPI PCI bus> on pcib8 >> mpt0: <LSILogic SAS/SATA Adapter> port 0xec00-0xecff mem 0xfc7fc000-0xfc7fffff,0xfc7e0000-0xfc7effff irq 64 at device 8.0 on pci2 >> mpt0: [GIANT-LOCKED] >> mpt0: MPI Version=1.5.12.0 >> mpt0: mpt_cam_event: 0x16 >> mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). >> mpt0: mpt_cam_event: 0x12 >> mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required). >> mpt0: mpt_cam_event: 0x16 >> mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). >> pcib9: <ACPI PCI-PCI bridge> at device 4.0 on pci0 >> pci11: <ACPI PCI bus> on pcib9 >> pcib10: <PCI-PCI bridge> at device 5.0 on pci0 >> pci12: <PCI bus> on pcib10 >> pcib11: <ACPI PCI-PCI bridge> at device 6.0 on pci0 >> pci13: <ACPI PCI bus> on pcib11 >> pcib12: <PCI-PCI bridge> at device 0.0 on pci13 >> pci14: <PCI bus> on pcib12 >> mfi0: <Dell PERC 5/i> mem 0xd80f0000-0xd80fffff,0xfc4e0000-0xfc4fffff irq 18 at device 14.0 on pci14 >> pcib13: <PCI-PCI bridge> at device 0.2 on pci13 >> pci15: <PCI bus> on pcib13 >> pcib14: <PCI-PCI bridge> at device 7.0 on pci0 >> pci16: <PCI bus> on pcib14 >> pcib15: <ACPI PCI-PCI bridge> at device 28.0 on pci0 >> pci3: <ACPI PCI bus> on pcib15 >> pcib16: <PCI-PCI bridge> at device 0.0 on pci3 >> pci4: <PCI bus> on pcib16 >> bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci4 >> bce1: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz >> miibus1: <MII bus> on bce1 >> brgphy1: <BCM5708C 10/100/1000baseTX PHY> on miibus1 >> brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto >> bce1: Ethernet address: 00:13:72:fb:cb:14 >> uhci0: <UHCI (generic) USB controller> port 0xcce0-0xccff irq 21 at device 29.0 on pci0 >> uhci0: [GIANT-LOCKED] >> usb0: <UHCI (generic) USB controller> on uhci0 >> usb0: USB revision 1.0 >> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >> uhub0: 2 ports with 2 removable, self powered >> uhci1: <UHCI (generic) USB controller> port 0xccc0-0xccdf irq 20 at device 29.1 on pci0 >> uhci1: [GIANT-LOCKED] >> usb1: <UHCI (generic) USB controller> on uhci1 >> usb1: USB revision 1.0 >> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >> uhub1: 2 ports with 2 removable, self powered >> uhci2: <UHCI (generic) USB controller> port 0xcca0-0xccbf irq 21 at device 29.2 on pci0 >> uhci2: [GIANT-LOCKED] >> usb2: <UHCI (generic) USB controller> on uhci2 >> usb2: USB revision 1.0 >> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >> uhub2: 2 ports with 2 removable, self powered >> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfc900000-0xfc9003ff irq 21 at device 29.7 on pci0 >> ehci0: [GIANT-LOCKED] >> usb3: EHCI version 1.0 >> usb3: companion controllers, 2 ports each: usb0 usb1 usb2 >> usb3: <EHCI (generic) USB 2.0 controller> on ehci0 >> usb3: USB revision 2.0 >> uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 >> uhub3: 6 ports with 6 removable, self powered >> uhub4: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2 >> uhub4: multiple transaction translators >> uhub4: 4 ports with 4 removable, self powered >> pcib17: <ACPI PCI-PCI bridge> at device 30.0 on pci0 >> pci17: <ACPI PCI bus> on pcib17 >> pci17: <display, VGA> at device 13.0 (no driver attached) >> isab0: <PCI-ISA bridge> at device 31.0 on pci0 >> isa0: <ISA bus> on isab0 >> atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 >> ata0: <ATA channel 0> on atapci0 >> ata1: <ATA channel 1> on atapci0 >> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 >> fdc0: does not respond >> device_attach: fdc0 attach returned 6 >> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 >> sio0: type 16550A >> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 >> sio1: type 16550A >> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 >> fdc0: does not respond >> device_attach: fdc0 attach returned 6 >> pmtimer0 on isa0 >> orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xcf000-0xd07ff,0xec000-0xeffff on isa0 >> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 >> atkbd0: <AT Keyboard> irq 1 on atkbdc0 >> kbd0 at atkbd0 >> atkbd0: [GIANT-LOCKED] >> ppc0: parallel port not found. >> sc0: <System console> at flags 0x100 on isa0 >> sc0: VGA <16 virtual consoles, flags=0x300> >> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >> ums0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 2, iclass 3/1 >> ums0: 3 buttons and Z dir. >> ukbd0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/1 >> kbd2 at ukbd0 >> uhid0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/1 >> Timecounters tick every 1.000 msec >> acd0: CDROM <TEAC CD-ROM CD-224E-N/3.AB> at ata0-master UDMA33 >> mfi0: 68 - PCI 0x041028 0x0415 0x041028 0x041f01: Firmware initialization started (PCI ID 0015/1028/1f01/1028) >> mfi0: 69 - Type 18: Firmware version 1.00.01-0081 >> mfi0: 70 - Battery Present >> mfi0: 71 - Adapter ticks 213277741 elapsed 54s: Time established as 10/04/06 11:49:01; (54 seconds since power on) >> ses0 at mpt0 bus 0 target 8 lun 0 >> ses0: <DP BACKPLANE 1.00> Fixed Enclosure Services SCSI-5 device >> ses0: 300.000MB/s transfers >> ses0: SCSI-3 SES Device >> SMP: AP CPU #1 Launched! >> da0 at mpt0 bus 0 target 0 lun 0 >> da0: <FUJITSU MAX3036RC D206> Fixed Direct Access SCSI-3 device >> da0: 300.000MB/s transfers, Tagged Queueing Enabled >> da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) >> Trying to mount root from ufs:/dev/da0s1a >> mfi0: 72 - Battery temperature is normal >> mfi0: 73 - Battery started charging >> mfi0: 74 - Current capacity of the battery is above threshold >> bce0: link state changed to DOWN >> bce0: link state changed to UP >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> freebsd-current_at_freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-current >> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" >> > > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" >Received on Tue Oct 17 2006 - 10:00:39 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:01 UTC