uhub1: device problem (IOERROR), disabling port 6

Running current.
NVidia motherboard.

A new issue has arisen and, seeing how it has not been
fixed in 8 or so weeks I think I'd better report it.

This problem cropped up on two different machines.

When I insert a umass usb device I get an error to
stdout:

uhub1: device problem (IOERROR), disabling port 6

I'm used to getting a message that says something to
the effect that "umass device assigned to device da?."

also getting a cureous message on the boot that seems
to not affect performance:

This machine has one of them universal flash card
reders on it too - which accounts for some (all?) of
the umass errors in the boot.

Sep 14 12:49:28 turandot kernel: stray irq7


some output:

$ uname -a
FreeBSD turandot.opera 7.0-CURRENT FreeBSD 7.0-CURRENT
#2: Thu Sep 14 11:56:13 MST 2006    
root_at_turandot.opera:/usr/obj/usr/src/sys/TURANDOT 
i386

 $ dmesg | tail 
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40
asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): Unretryable error
Opened disk da3 -> 6
Trying to mount root from ufs:/dev/ad1s1a
bridge0: Ethernet address: 52:ef:c4:6c:69:eb
stray irq7
stray irq7
uhub1: device problem (IOERROR), disabling port 6



$ dmesg
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
        The Regents of the University of California.
All rights reserved.
FreeBSD 7.0-CURRENT #2: Thu Sep 14 11:56:13 MST 2006
    root_at_turandot.opera:/usr/obj/usr/src/sys/TURANDOT
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3500+ (2204.61-MHz
686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20ff2  Stepping = 2
 
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD
Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
  AMD Features2=0x1<LAHF>
real memory  = 938409984 (894 MB)
avail memory = 904851456 (862 MB)
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111,
RF5112, RF2413, RF5413)
acpi0: <Nvidia AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality
1000
acpi_timer0: <24-bit timer at 3.579545MHz> port
0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on
acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
nvidia0: <GeForce 6100> mem
0xfc000000-0xfcffffff,0xd0000000-0xdfffffff,0xfd0000
00-0xfdffffff irq 11 at device 5.0 on pci0
nvidia0: [GIANT-LOCKED]
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver
attached)
pci0: <memory, RAM> at device 10.2 (no driver
attached)
ohci0: <OHCI (generic) USB controller> mem
0xfebff000-0xfebfffff irq 5 at device 11.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev
1.00/1.00, addr 1> on usb0
uhub0: 8 ports with 8 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem
0xfebfe000-0xfebfe0ff irq 11 at device 11.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 8 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev
2.00/1.00, addr 1> on usb1
uhub1: 8 ports with 8 removable, self powered
uhub1: device problem (IOERROR), disabling port 8
atapci0: <nVidia nForce MCP51 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at
device 13.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP51 SATA300 controller> port
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f
mem 0xfebfd000-0xfebfdfff irq 11 at device 14.0 on
pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pcib4: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci4: <ACPI PCI bus> on pcib4
fwohci0: <Texas Instruments TSB43AB23> mem
0xfe7ff000-0xfe7ff7ff,0xfe7f8000-0xfe7fbfff irq 5 at
device 6.0 on pci4
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:01:6c:20:00:13:3b:b2
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ath0: <Atheros 5212> mem 0xfe7e0000-0xfe7effff irq 5
at device 7.0 on pci4
ath0: Ethernet address: 00:0f:b5:f9:44:20
ath0: mac 7.9 phy 4.5 radio 5.6
pci4: <multimedia, video> at device 8.0 (no driver
attached)
pci4: <multimedia> at device 8.1 (no driver attached)
pcm0: <nVidia nForce 410 MCP> port
0xdc00-0xdcff,0xd800-0xd8ff mem 0xfebfc000-0xfebfcfff
irq 11 at device 16.2 on pci0
pcm0: <Avance Logic ALC655 AC97 Codec>
nve0: <NVIDIA nForce MCP13 Networking Adapter> port
0xd400-0xd407 mem 0xfebfb000-0xfebfbfff irq 10 at
device 20.0 on pci0
nve0: Ethernet address 00:15:58:0e:88:2d
miibus0: <MII bus> on nve0
ukphy0: <Generic IEEE 802.3u media interface> on
miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
nve0: Ethernet address: 00:15:58:0e:88:2d
acpi_tz0: <Thermal Zone> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xd0000-0xd3fff,0xd4000-0xd57ff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FAST]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
ukbd0: <Device USB Device, class 0/0, rev 1.10/11.14,
addr 2> on uhub0
kbd2 at ukbd0
ums0: <Device USB Device, class 0/0, rev 1.10/11.14,
addr 2> on uhub0
ums0: 5 buttons and Z dir.
umass0: <vendor 0x058f USB Reader, class 0/0, rev
1.10/1.00, addr 3> on uhub0
Timecounter "TSC" frequency 2204610932 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38166MB <Maxtor 54098W8 DAC10SC0> at ata0-master
UDMA100
ad1: 190782MB <WDC WD2000BB-00GUC0 08.02D08> at
ata0-slave UDMA100
acd0: DVDR <HL-DT-ST DVD-RW GWA-4165B/DG01> at
ata1-master UDMA66
acd1: DVDROM <HL-DT-STDVD-ROM GDR8164B/0G08> at
ata1-slave UDMA66
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVD-RW GWA-4165B DG01> Removable CD-ROM
SCSI-0 device 
cd0: 66.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY,
Medium not present
cd1 at ata1 bus 0 target 1 lun 0
cd1: <HL-DT-ST DVD-ROM GDR8164B 0G08> Removable CD-ROM
SCSI-0 device 
cd1: 66.000MB/s transfers
cd1: cd present [158396 x 2048 byte records]
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct
Access SCSI-0 device 
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY,
Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct
Access SCSI-0 device 
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY,
Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct
Access SCSI-0 device 
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY,
Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct
Access SCSI-0 device 
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY,
Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0
0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40
asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0
0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40
asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0
0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40
asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0
0 0 0 0 0 0 
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40
asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0
0 0 0 0 0 0 
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40
asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0
0 0 0 0 0 0 
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40
asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0
0 0 0 0 0 0 
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40
asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): Unretryable error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0
0 0 0 0 0 0 
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40
asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): Unretryable error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0
0 0 0 0 0 0 
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40
asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): Unretryable error
Opened disk da2 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0
0 0 0 0 0 0 
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40
asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): Unretryable error
Opened disk da3 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0
0 0 0 0 0 0 
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40
asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): Unretryable error
Opened disk da3 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0
0 0 0 0 0 0 
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40
asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): Unretryable error
Opened disk da3 -> 6
Trying to mount root from ufs:/dev/ad1s1a
bridge0: Ethernet address: 52:ef:c4:6c:69:eb
stray irq7
stray irq7
uhub1: device problem (IOERROR), disabling port 6


======
Now I, Nebuchadnezzar, praise and extol and honor the King of heaven, for all his works are truth, and his ways are justice; and he is able to bring low those who walk in pride.
Daniel 4:37

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com