Re: uhub1: device problem (IOERROR), disabling port 6

Neil Short wrote:
> Running current.
> NVidia motherboard.
>
> A new issue has arisen and, seeing how it has not been
> fixed in 8 or so weeks I think I'd better report it.
>
> This problem cropped up on two different machines.
>
> When I insert a umass usb device I get an error to
> stdout:
>
> uhub1: device problem (IOERROR), disabling port 6
>
> I'm used to getting a message that says something to
> the effect that "umass device assigned to device da?."
>
> also getting a cureous message on the boot that seems
> to not affect performance:
>
> This machine has one of them universal flash card
> reders on it too - which accounts for some (all?) of
> the umass errors in the boot.
>
> Sep 14 12:49:28 turandot kernel: stray irq7
>
>
> some output:
>
> $ uname -a
> FreeBSD turandot.opera 7.0-CURRENT FreeBSD 7.0-CURRENT
> #2: Thu Sep 14 11:56:13 MST 2006    
> root_at_turandot.opera:/usr/obj/usr/src/sys/TURANDOT 
> i386
>
>  $ dmesg | tail 
> (da3:umass-sim0:0:0:3): SCSI Status: Check Condition
> (da3:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40
> asc:3a,0
> (da3:umass-sim0:0:0:3): Medium not present
> (da3:umass-sim0:0:0:3): Unretryable error
> Opened disk da3 -> 6
> Trying to mount root from ufs:/dev/ad1s1a
> bridge0: Ethernet address: 52:ef:c4:6c:69:eb
> stray irq7
> stray irq7
> uhub1: device problem (IOERROR), disabling port 6
>
>
>
> $ dmesg
> Copyright (c) 1992-2006 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
> 1991, 1992, 1993, 1994
>         The Regents of the University of California.
> All rights reserved.
> FreeBSD 7.0-CURRENT #2: Thu Sep 14 11:56:13 MST 2006
>     root_at_turandot.opera:/usr/obj/usr/src/sys/TURANDOT
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Athlon(tm) 64 Processor 3500+ (2204.61-MHz
> 686-class CPU)
>   Origin = "AuthenticAMD"  Id = 0x20ff2  Stepping = 2
>  
> Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
>   Features2=0x1<SSE3>
>   AMD
> Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
>   AMD Features2=0x1<LAHF>
> real memory  = 938409984 (894 MB)
> avail memory = 904851456 (862 MB)
> kbd1 at kbdmux0
> ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111,
> RF5112, RF2413, RF5413)
> acpi0: <Nvidia AWRDACPI> on motherboard
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi0: Power Button (fixed)
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> Timecounter "ACPI-fast" frequency 3579545 Hz quality
> 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port
> 0x1008-0x100b on acpi0
> cpu0: <ACPI CPU> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on
> acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: <memory, RAM> at device 0.0 (no driver attached)
> pci0: <memory, RAM> at device 0.1 (no driver attached)
> pci0: <memory, RAM> at device 0.2 (no driver attached)
> pci0: <memory, RAM> at device 0.3 (no driver attached)
> pci0: <memory, RAM> at device 0.4 (no driver attached)
> pci0: <memory, RAM> at device 0.5 (no driver attached)
> pci0: <memory, RAM> at device 0.6 (no driver attached)
> pci0: <memory, RAM> at device 0.7 (no driver attached)
> pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> nvidia0: <GeForce 6100> mem
> 0xfc000000-0xfcffffff,0xd0000000-0xdfffffff,0xfd0000
> 00-0xfdffffff irq 11 at device 5.0 on pci0
> nvidia0: [GIANT-LOCKED]
> pci0: <memory, RAM> at device 9.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 10.0 on pci0
> isa0: <ISA bus> on isab0
> pci0: <serial bus, SMBus> at device 10.1 (no driver
> attached)
> pci0: <memory, RAM> at device 10.2 (no driver
> attached)
> ohci0: <OHCI (generic) USB controller> mem
> 0xfebff000-0xfebfffff irq 5 at device 11.0 on pci0
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0, legacy support
> usb0: SMM does not respond, resetting
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: <nVidia OHCI root hub, class 9/0, rev
> 1.00/1.00, addr 1> on usb0
> uhub0: 8 ports with 8 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem
> 0xfebfe000-0xfebfe0ff irq 11 at device 11.1 on pci0
> ehci0: [GIANT-LOCKED]
> usb1: EHCI version 1.0
> usb1: companion controller, 8 ports each: usb0
> usb1: <EHCI (generic) USB 2.0 controller> on ehci0
> usb1: USB revision 2.0
> uhub1: <nVidia EHCI root hub, class 9/0, rev
> 2.00/1.00, addr 1> on usb1
> uhub1: 8 ports with 8 removable, self powered
> uhub1: device problem (IOERROR), disabling port 8
> atapci0: <nVidia nForce MCP51 UDMA133 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at
> device 13.0 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> atapci1: <nVidia nForce MCP51 SATA300 controller> port
> 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f
> mem 0xfebfd000-0xfebfdfff irq 11 at device 14.0 on
> pci0
> ata2: <ATA channel 0> on atapci1
> ata3: <ATA channel 1> on atapci1
> pcib4: <ACPI PCI-PCI bridge> at device 16.0 on pci0
> pci4: <ACPI PCI bus> on pcib4
> fwohci0: <Texas Instruments TSB43AB23> mem
> 0xfe7ff000-0xfe7ff7ff,0xfe7f8000-0xfe7fbfff irq 5 at
> device 6.0 on pci4
> fwohci0: OHCI version 1.10 (ROM=1)
> fwohci0: No. of Isochronous channels is 4.
> fwohci0: EUI64 00:01:6c:20:00:13:3b:b2
> fwohci0: Phy 1394a available S400, 3 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> sbp0: <SBP-2/SCSI over FireWire> on firewire0
> fwohci0: Initiate bus reset
> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
> firewire0: bus manager 0 (me)
> ath0: <Atheros 5212> mem 0xfe7e0000-0xfe7effff irq 5
> at device 7.0 on pci4
> ath0: Ethernet address: 00:0f:b5:f9:44:20
> ath0: mac 7.9 phy 4.5 radio 5.6
> pci4: <multimedia, video> at device 8.0 (no driver
> attached)
> pci4: <multimedia> at device 8.1 (no driver attached)
> pcm0: <nVidia nForce 410 MCP> port
> 0xdc00-0xdcff,0xd800-0xd8ff mem 0xfebfc000-0xfebfcfff
> irq 11 at device 16.2 on pci0
> pcm0: <Avance Logic ALC655 AC97 Codec>
> nve0: <NVIDIA nForce MCP13 Networking Adapter> port
> 0xd400-0xd407 mem 0xfebfb000-0xfebfbfff irq 10 at
> device 20.0 on pci0
> nve0: Ethernet address 00:15:58:0e:88:2d
> miibus0: <MII bus> on nve0
> ukphy0: <Generic IEEE 802.3u media interface> on
> miibus0
> ukphy0:  10baseT, 10baseT-FDX, 100baseTX,
> 100baseTX-FDX, auto
> nve0: Ethernet address: 00:15:58:0e:88:2d
> acpi_tz0: <Thermal Zone> on acpi0
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem
> 0xd0000-0xd3fff,0xd4000-0xd57ff pnpid ORM0000 on isa0
> atkbdc0: <Keyboard controller (i8042)> at port
> 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 8250 or not responding
> sio0: [FAST]
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
> 0xa0000-0xbffff on isa0
> ukbd0: <Device USB Device, class 0/0, rev 1.10/11.14,
> addr 2> on uhub0
> kbd2 at ukbd0
> ums0: <Device USB Device, class 0/0, rev 1.10/11.14,
> addr 2> on uhub0
> ums0: 5 buttons and Z dir.
> umass0: <vendor 0x058f USB Reader, class 0/0, rev
> 1.10/1.00, addr 3> on uhub0
> Timecounter "TSC" frequency 2204610932 Hz quality 800
> Timecounters tick every 1.000 msec
> ad0: 38166MB <Maxtor 54098W8 DAC10SC0> at ata0-master
> UDMA100
> ad1: 190782MB <WDC WD2000BB-00GUC0 08.02D08> at
> ata0-slave UDMA100
> acd0: DVDR <HL-DT-ST DVD-RW GWA-4165B/DG01> at
> ata1-master UDMA66
> acd1: DVDROM <HL-DT-STDVD-ROM GDR8164B/0G08> at
> ata1-slave UDMA66
> cd0 at ata1 bus 0 target 0 lun 0
> cd0: <HL-DT-ST DVD-RW GWA-4165B DG01> Removable CD-ROM
> SCSI-0 device 
> cd0: 66.000MB/s transfers
> cd0: Attempt to query device size failed: NOT READY,
> Medium not present
> cd1 at ata1 bus 0 target 1 lun 0
> cd1: <HL-DT-ST DVD-ROM GDR8164B 0G08> Removable CD-ROM
> SCSI-0 device 
> cd1: 66.000MB/s transfers
> cd1: cd present [158396 x 2048 byte records]
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <Generic USB SD Reader 1.00> Removable Direct
> Access SCSI-0 device 
> da0: 1.000MB/s transfers
> da0: Attempt to query device size failed: NOT READY,
> Medium not present
> da1 at umass-sim0 bus 0 target 0 lun 1
> da1: <Generic USB CF Reader 1.01> Removable Direct
> Access SCSI-0 device 
> da1: 1.000MB/s transfers
> da1: Attempt to query device size failed: NOT READY,
> Medium not present
> da2 at umass-sim0 bus 0 target 0 lun 2
> da2: <Generic USB SM Reader 1.02> Removable Direct
> Access SCSI-0 device 
> da2: 1.000MB/s transfers
> da2: Attempt to query device size failed: NOT READY,
> Medium not present
> da3 at umass-sim0 bus 0 target 0 lun 3
> da3: <Generic USB MS Reader 1.03> Removable Direct
> Access SCSI-0 device 
> da3: 1.000MB/s transfers
> da3: Attempt to query device size failed: NOT READY,
> Medium not present
> (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0
> 0 0 0 0 0 
> (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da0:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40
> asc:3a,0
> (da0:umass-sim0:0:0:0): Medium not present
> (da0:umass-sim0:0:0:0): Unretryable error
> Opened disk da0 -> 6
> (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0
> 0 0 0 0 0 
> (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da0:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40
> asc:3a,0
> (da0:umass-sim0:0:0:0): Medium not present
> (da0:umass-sim0:0:0:0): Unretryable error
> Opened disk da0 -> 6
> (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0
> 0 0 0 0 0 
> (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da0:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40
> asc:3a,0
> (da0:umass-sim0:0:0:0): Medium not present
> (da0:umass-sim0:0:0:0): Unretryable error
> Opened disk da0 -> 6
> (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0
> 0 0 0 0 0 0 
> (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:1): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40
> asc:3a,0
> (da1:umass-sim0:0:0:1): Medium not present
> (da1:umass-sim0:0:0:1): Unretryable error
> Opened disk da1 -> 6
> (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0
> 0 0 0 0 0 0 
> (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:1): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40
> asc:3a,0
> (da1:umass-sim0:0:0:1): Medium not present
> (da1:umass-sim0:0:0:1): Unretryable error
> Opened disk da1 -> 6
> (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0
> 0 0 0 0 0 0 
> (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:1): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40
> asc:3a,0
> (da1:umass-sim0:0:0:1): Medium not present
> (da1:umass-sim0:0:0:1): Unretryable error
> Opened disk da1 -> 6
> (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0
> 0 0 0 0 0 0 
> (da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
> (da2:umass-sim0:0:0:2): SCSI Status: Check Condition
> (da2:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40
> asc:3a,0
> (da2:umass-sim0:0:0:2): Medium not present
> (da2:umass-sim0:0:0:2): Unretryable error
> Opened disk da2 -> 6
> (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0
> 0 0 0 0 0 0 
> (da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
> (da2:umass-sim0:0:0:2): SCSI Status: Check Condition
> (da2:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40
> asc:3a,0
> (da2:umass-sim0:0:0:2): Medium not present
> (da2:umass-sim0:0:0:2): Unretryable error
> Opened disk da2 -> 6
> (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0
> 0 0 0 0 0 0 
> (da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
> (da2:umass-sim0:0:0:2): SCSI Status: Check Condition
> (da2:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40
> asc:3a,0
> (da2:umass-sim0:0:0:2): Medium not present
> (da2:umass-sim0:0:0:2): Unretryable error
> Opened disk da2 -> 6
> (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0
> 0 0 0 0 0 0 
> (da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
> (da3:umass-sim0:0:0:3): SCSI Status: Check Condition
> (da3:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40
> asc:3a,0
> (da3:umass-sim0:0:0:3): Medium not present
> (da3:umass-sim0:0:0:3): Unretryable error
> Opened disk da3 -> 6
> (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0
> 0 0 0 0 0 0 
> (da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
> (da3:umass-sim0:0:0:3): SCSI Status: Check Condition
> (da3:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40
> asc:3a,0
> (da3:umass-sim0:0:0:3): Medium not present
> (da3:umass-sim0:0:0:3): Unretryable error
> Opened disk da3 -> 6
> (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0
> 0 0 0 0 0 0 
> (da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
> (da3:umass-sim0:0:0:3): SCSI Status: Check Condition
> (da3:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40
> asc:3a,0
> (da3:umass-sim0:0:0:3): Medium not present
> (da3:umass-sim0:0:0:3): Unretryable error
> Opened disk da3 -> 6
> Trying to mount root from ufs:/dev/ad1s1a
> bridge0: Ethernet address: 52:ef:c4:6c:69:eb
> stray irq7
> stray irq7
> uhub1: device problem (IOERROR), disabling port 6
>
>
> ======
> Now I, Nebuchadnezzar, praise and extol and honor the King of heaven, for all his works are truth, and his ways are justice; and he is able to bring low those who walk in pride.
> Daniel 4:37
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"
>   
More or less same problem here with freebsd-current and an Asus MN2PV-VM 
(Nforce430+GeForce 6150 integrated chipset)

USB mouse works but not usb storage (umass).

Same message in dmesg and when I plug my usb key.

Bruno