Re: aac(4) update request

From: Andrey V. Elsukov <bu7cher_at_yandex.ru>
Date: Mon, 25 Sep 2006 13:35:36 +0400
Andrey V. Elsukov wrote:
> Can you update FreeBSD aac(4) driver to a current 
 > adaptec driver that available on the site?
> As i found last driver is b9114. This driver support 
 > IBM ServeRAID 8K, I and L adapters.
 > But this driver available only for FreeBSD 5.4. :(

Thanks to Andrew Jemerya for pointing to new aacu(4) driver for
FreeBSD 6.0.
http://www.adaptec.com/en-US/downloads/unix/freebsd?productId=AAR-2820SA
http://www.adaptec.com/en-US/speed/raid/aac/linux/aacraid_drv_freebsd6_v9179_tar_gz.htm

I've merged some changes from this driver to RELENG_6 sources.
I've created a custom FreeBSD 6.2-BETA1 ISO image with a my
patch to aac(4).
Now i've successfully installed FreeBSD to my new IBM x3650
with an IBM ServeRAID-8k controller. I think that this patch
can be successfully applied to CURRENT sources.

Patch and dmesg.boot is attached.
-- 
WBR, Andrey V. Elsukov

--- sys/dev/aac.orig/aac.c	Mon Jan 30 00:00:00 2006
+++ sys/dev/aac/aac.c	Fri Sep 22 12:51:24 2006
_at__at_ -33,7 +33,7 _at__at_
 /*
  * Driver for the Adaptec 'FSA' family of PCI/SCSI RAID adapters.
  */
-#define AAC_DRIVER_VERSION		0x02000000
+#define AAC_DRIVER_VERSION		0x02000001
 #define AAC_DRIVERNAME			"aac"
 
 #include "opt_aac.h"
_at__at_ -1668,14 +1668,12 _at__at_
 	sc->aac_max_sectors = 128;				/* 64KB */
 	if (sc->flags & AAC_FLAGS_SG_64BIT)
 		sc->aac_sg_tablesize = (AAC_FIB_DATASIZE
-		 - sizeof(struct aac_blockwrite64)
-		 + sizeof(struct aac_sg_table64))
-		 / sizeof(struct aac_sg_table64);
+		 - sizeof(struct aac_blockwrite64))
+		 / sizeof(struct aac_sg_entry64);
 	else
 		sc->aac_sg_tablesize = (AAC_FIB_DATASIZE
-		 - sizeof(struct aac_blockwrite)
-		 + sizeof(struct aac_sg_table))
-		 / sizeof(struct aac_sg_table);
+		 - sizeof(struct aac_blockwrite))
+		 / sizeof(struct aac_sg_entry);
 
 	if (!aac_sync_command(sc, AAC_MONKER_GETCOMMPREF, 0, 0, 0, 0, NULL)) {
 		options = AAC_GET_MAILBOX(sc, 1);
_at__at_ -3220,7 +3218,7 _at__at_
 	mtx_lock(&sc->aac_aifq_lock);
 	next = (sc->aac_aifq_head + 1) % AAC_AIFQ_LENGTH;
 	if (next != sc->aac_aifq_tail) {
-		bcopy(aif, &sc->aac_aifq[next], sizeof(struct aac_aif_command));
+		bcopy(fib, &sc->aac_aifq[next], sizeof(struct aac_fib));
 		sc->aac_aifq_head = next;
 
 		/* On the off chance that someone is sleeping for an aif... */
_at__at_ -3327,7 +3325,7 _at__at_
 
 	next = (sc->aac_aifq_tail + 1) % AAC_AIFQ_LENGTH;
 	error = copyout(&sc->aac_aifq[next], uptr,
-			sizeof(struct aac_aif_command));
+			sizeof(struct aac_fib));
 	if (error)
 		device_printf(sc->aac_dev,
 		    "aac_return_aif: copyout returned %d\n", error);
--- sys/dev/aac.orig/aac_pci.c	Thu Jun 22 09:01:00 2006
+++ sys/dev/aac/aac_pci.c	Fri Sep 22 12:52:45 2006
_at__at_ -126,13 +126,13 _at__at_
 	{0x9005, 0x0285, 0x9005, 0x0286, AAC_HWIF_I960RX, AAC_FLAGS_NO4GB |
 	 AAC_FLAGS_256FIBS, "Adaptec SCSI RAID 2120S"},
 	{0x9005, 0x0285, 0x9005, 0x0290, AAC_HWIF_I960RX, AAC_FLAGS_NO4GB,
-	 "Adaptec SATA RAID 2410SA"},
+	 "Adaptec SCSI RAID 2410SA"},
 	{0x9005, 0x0285, 0x1028, 0x0291, AAC_HWIF_I960RX, AAC_FLAGS_NO4GB,
 	 "Dell CERC SATA RAID 2"},
 	{0x9005, 0x0285, 0x9005, 0x0292, AAC_HWIF_I960RX, AAC_FLAGS_NO4GB,
-	 "Adaptec SATA RAID 2810SA"},
+	 "Adaptec SCSI RAID 2810SA"},
 	{0x9005, 0x0285, 0x9005, 0x0293, AAC_HWIF_I960RX, AAC_FLAGS_NO4GB,
-	 "Adaptec SATA RAID 21610SA"},
+	 "Adaptec SCSI RAID 21610SA"},
 	{0x9005, 0x0285, 0x103c, 0x3227, AAC_HWIF_I960RX, AAC_FLAGS_NO4GB,
 	 "HP ML110 G2 (Adaptec 2610SA)"},
 	{0x9005, 0x0286, 0x9005, 0x028c, AAC_HWIF_RKT, 0,
_at__at_ -161,19 +161,19 _at__at_
 	{0x9005, 0x0286, 0x9005, 0x029d, AAC_HWIF_RKT, 0,
 	 "Adaptec SATA RAID 2420SA"},
 	{0x9005, 0x0286, 0x9005, 0x029e, AAC_HWIF_RKT, 0,
-	 "ICP ICP9024RO SCSI RAID"},
+	 "ICP9024RO SATA RAID"},
 	{0x9005, 0x0286, 0x9005, 0x029f, AAC_HWIF_RKT, 0,
-	 "ICP ICP9014RO SCSI RAID"},
+	 "ICP9014RO SATA RAID"},
 	{0x9005, 0x0285, 0x9005, 0x0294, AAC_HWIF_I960RX, 0,
 	 "Adaptec SATA RAID 2026ZCR"},
-	{0x9005, 0x0285, 0x103c, 0x3227, AAC_HWIF_I960RX, 0,
-	 "Adaptec SATA RAID 2610SA"},
 	{0x9005, 0x0285, 0x9005, 0x0296, AAC_HWIF_I960RX, 0,
 	 "Adaptec SCSI RAID 2240S"},
 	{0x9005, 0x0285, 0x9005, 0x0297, AAC_HWIF_I960RX, 0,
 	 "Adaptec SAS RAID 4005SAS"},
 	{0x9005, 0x0285, 0x1014, 0x02f2, AAC_HWIF_I960RX, 0,
 	 "IBM ServeRAID 8i"},
+	{0x9005, 0x0285, 0x1014, 0x0312, AAC_HWIF_I960RX, 0,
+	 "IBM ServeRAID 8i"},
 	{0x9005, 0x0285, 0x9005, 0x0298, AAC_HWIF_I960RX, 0,
 	 "Adaptec SAS RAID 4000SAS"},
 	{0x9005, 0x0285, 0x9005, 0x0299, AAC_HWIF_I960RX, 0,
_at__at_ -185,45 +185,53 _at__at_
 	{0x9005, 0x0285, 0x9005, 0x028f, AAC_HWIF_I960RX, 0,
 	 "Adaptec SATA RAID 2025SA ZCR"},
 	{0x9005, 0x0285, 0x9005, 0x02a4, AAC_HWIF_I960RX, 0,
-	 "ICP ICP9085LI SAS RAID"},
+	 "ICP 9085LI SAS RAID"},
 	{0x9005, 0x0285, 0x9005, 0x02a5, AAC_HWIF_I960RX, 0,
-	 "ICP ICP5085BR SAS RAID"},
+	 "ICP 5085BR SAS RAID"},
 	{0x9005, 0x0286, 0x9005, 0x02a0, AAC_HWIF_RKT, 0,
-	 "ICP ICP9047MA SATA RAID"},
+	 "ICP9047MA SATA RAID"},
 	{0x9005, 0x0286, 0x9005, 0x02a1, AAC_HWIF_RKT, 0,
-	 "ICP ICP9087MA SATA RAID"},
+	 "ICP9087MA SATA RAID"},
+	{0x9005, 0x0286, 0x9005, 0x02a2, AAC_HWIF_RKT, 0,
+	 "Adaptec SAS RAID 3800SAS"},
+	{0x9005, 0x0286, 0x9005, 0x02a3, AAC_HWIF_RKT, 0,
+	 "ICP5445AU SAS RAID"},
+	{0x9005, 0x0286, 0x9005, 0x02a6, AAC_HWIF_RKT, 0,
+	 "ICP9067MA SATA RAID"},
+	{0x9005, 0x0286, 0x9005, 0x02a7, AAC_HWIF_RKT, 0,
+	 "Adaptec SAS RAID 3805SAS"},
+	{0x9005, 0x0286, 0x9005, 0x02a9, AAC_HWIF_RKT, 0,
+	 "ICP5085AU SAS RAID"},
+	{0x9005, 0x0286, 0x9005, 0x02ac, AAC_HWIF_RKT, 0,
+	 "Adaptec SAS RAID 1800SAS"},
+	{0x9005, 0x0286, 0x1014, 0x9580, AAC_HWIF_RKT, 0,
+	 "IBM ServeRAID 8k"},
+	{0x9005, 0x0286, 0x1014, 0x9540, AAC_HWIF_RKT, 0,
+	 "IBM ServeRAID 8L"},
 	{0, 0, 0, 0, 0, 0, 0}
 };
 
-static struct aac_ident *
-aac_find_ident(device_t dev)
-{
-	struct aac_ident *m;
-
-	for (m = aac_identifiers; m->vendor != 0; m++) {
-		if ((m->vendor == pci_get_vendor(dev)) &&
-		    (m->device == pci_get_device(dev)) &&
-		    (m->subvendor == pci_get_subvendor(dev)) &&
-		    (m->subdevice == pci_get_subdevice(dev)))
-		return (m);
-	}
-
-	return (NULL);
-}
-
 /*
  * Determine whether this is one of our supported adapters.
  */
 static int
 aac_pci_probe(device_t dev)
 {
-	struct aac_ident *id;
+	struct aac_ident *m;
 
 	debug_called(1);
 
-	if ((id = aac_find_ident(dev)) != NULL) {
-		device_set_desc(dev, id->desc);
-		return(BUS_PROBE_DEFAULT);
+	for (m = aac_identifiers; m->vendor != 0; m++) {
+		if ((m->vendor == pci_get_vendor(dev)) &&
+		    (m->device == pci_get_device(dev)) &&
+		    ((m->subvendor == 0) || (m->subvendor ==
+					     pci_get_subvendor(dev))) &&
+		    ((m->subdevice == 0) || ((m->subdevice ==
+					      pci_get_subdevice(dev))))) {
+		
+			device_set_desc(dev, m->desc);
+			return(BUS_PROBE_SPECIFIC);
+		}
 	}
 	return(ENXIO);
 }
_at__at_ -235,8 +243,7 _at__at_
 aac_pci_attach(device_t dev)
 {
 	struct aac_softc *sc;
-	struct aac_ident *id;
-	int error;
+	int i, error;
 	u_int32_t command;
 
 	debug_called(1);
_at__at_ -310,8 +317,12 _at__at_
 	 * Detect the hardware interface version, set up the bus interface
 	 * indirection.
 	 */
-	id = aac_find_ident(dev);
-	sc->aac_hwif = id->hwif;
+	for (i = 0; aac_identifiers[i].vendor != 0; i++) {
+		if ((aac_identifiers[i].vendor == pci_get_vendor(dev)) &&
+		    (aac_identifiers[i].device == pci_get_device(dev)) &&
+		    (aac_identifiers[i].subvendor == pci_get_subvendor(dev)) &&
+		    (aac_identifiers[i].subdevice == pci_get_subdevice(dev))) {
+			sc->aac_hwif = aac_identifiers[i].hwif;
 	switch(sc->aac_hwif) {
 	case AAC_HWIF_I960RX:
 		debug(2, "set hardware up for i960Rx");
_at__at_ -331,13 +342,21 _at__at_
 		break;
 	default:
 		sc->aac_hwif = AAC_HWIF_UNKNOWN;
+				break;
+			}
+
+			/* Set up quirks */
+			sc->flags = aac_identifiers[i].quirks;
+
+			break;
+		}
+	}
+	if (sc->aac_hwif == AAC_HWIF_UNKNOWN) {
 		device_printf(sc->aac_dev, "unknown hardware type\n");
 		error = ENXIO;
 		goto out;
 	}
 
-	/* Set up quirks */
-	sc->flags = id->quirks;
 
 	/*
 	 * Do bus-independent initialisation.
--- sys/dev/aac.orig/aacvar.h	Sun Oct  9 00:00:00 2005
+++ sys/dev/aac/aacvar.h	Fri Sep 22 12:52:56 2006
_at__at_ -356,7 +356,7 _at__at_
 	/* management interface */
 	struct cdev *aac_dev_t;
 	struct mtx		aac_aifq_lock;
-	struct aac_aif_command	aac_aifq[AAC_AIFQ_LENGTH];
+	struct aac_fib	aac_aifq[AAC_AIFQ_LENGTH];
 	int			aac_aifq_head;
 	int			aac_aifq_tail;
 	struct selinfo		rcv_select;

Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.2-20060924-SNAP #0: Sat Sep 23 23:29:41 UTC 2006
    root_at_bridge.hostel4.hvn:/usr/obj/usr/src/sys/SMP
acpi_alloc_wakeup_handler: can't alloc wake memory
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.13-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf64  Stepping = 4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe4bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,CNTX-ID,CX16,<b14>,<b15>>
  AMD Features=0x20000000<LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
  Logical CPUs per core: 2
real memory  = 3221008384 (3071 MB)
avail memory = 3150974976 (3005 MB)
ACPI APIC Table: <IBM    SERVALNT>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <IBM SERVALNT> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x588-0x58b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
cpu2: <ACPI CPU> on acpi0
acpi_throttle2: <ACPI CPU Throttling> on cpu2
acpi_throttle2: failed to attach P_CNT
device_attach: acpi_throttle2 attach returned 6
cpu3: <ACPI CPU> on acpi0
acpi_throttle3: <ACPI CPU Throttling> on cpu3
acpi_throttle3: failed to attach P_CNT
device_attach: acpi_throttle3 attach returned 6
cpu4: <ACPI CPU> on acpi0
acpi_throttle4: <ACPI CPU Throttling> on cpu4
acpi_throttle4: failed to attach P_CNT
device_attach: acpi_throttle4 attach returned 6
cpu5: <ACPI CPU> on acpi0
acpi_throttle5: <ACPI CPU Throttling> on cpu5
acpi_throttle5: failed to attach P_CNT
device_attach: acpi_throttle5 attach returned 6
cpu6: <ACPI CPU> on acpi0
acpi_throttle6: <ACPI CPU Throttling> on cpu6
acpi_throttle6: failed to attach P_CNT
device_attach: acpi_throttle6 attach returned 6
cpu7: <ACPI CPU> on acpi0
acpi_throttle7: <ACPI CPU Throttling> on cpu7
acpi_throttle7: failed to attach P_CNT
device_attach: acpi_throttle7 attach returned 6
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci26: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci26
pci27: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci27
pci28: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci27
pci36: <ACPI PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 0.3 on pci26
pci37: <PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib6
aac0: <IBM ServeRAID 8k> port 0x5000-0x50ff mem 0xc9e00000-0xc9ffffff,0xc7fe0000-0xc7ffffff irq 17 at device 0.0 on pci4
aac0: New comm. interface enabled
aac0: Adaptec Raid Controller 2.0.1-1
pcib7: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci16: <ACPI PCI bus> on pcib7
pcib8: <PCI-PCI bridge> at device 5.0 on pci0
pci69: <PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci7: <ACPI PCI bus> on pcib9
pcib10: <PCI-PCI bridge> at device 7.0 on pci0
pci68: <PCI bus> on pcib10
pci0: <base peripheral> at device 8.0 (no driver attached)
pcib11: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib11
pcib12: <PCI-PCI bridge> at device 0.0 on pci2
pci3: <PCI bus> on pcib12
bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem 0xce000000-0xcfffffff irq 16 at device 0.0 on pci3
bce0: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bce0: Ethernet address: 00:14:5e:18:16:72
pcib13: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci5: <ACPI PCI bus> on pcib13
pcib14: <PCI-PCI bridge> at device 0.0 on pci5
pci6: <PCI bus> on pcib14
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem 0xca000000-0xcbffffff irq 17 at device 0.0 on pci6
bce1: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bce1: Ethernet address: 00:14:5e:18:16:74
uhci0: <UHCI (generic) USB controller> port 0x2200-0x221f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x2600-0x261f irq 22 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x2a00-0x2a1f irq 23 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x2e00-0x2e1f irq 22 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf9000000-0xf90003ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib15: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib15
pci1: <display, VGA> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x480-0x48f at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcc7ff,0xcc800-0xcdfff,0xce000-0xd2fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: CHICONY HP Basic USB Keyboard, rev 1.10/3.00, addr 2, iclass 3/1
kbd2 at ukbd0
ukbd1: vendor 0x10d5 UKU-M02 1.7, rev 1.10/0.00, addr 2, iclass 3/1
kbd3 at ukbd1
ums0: vendor 0x10d5 UKU-M02 1.7, rev 1.10/0.00, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: CDRW <UJDA770 DVD/CDRW/1.20> at ata1-master UDMA33
aacd0: <RAID 1 (Mirror)> on aac0
aacd0: 69890MB (143134720 sectors)
aacd1: <RAID 5> on aac0
aacd1: 139788MB (286285824 sectors)
SMP: AP CPU #2 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #5 Launched!
Trying to mount root from ufs:/dev/aacd0s1a
Received on Mon Sep 25 2006 - 07:36:13 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:00 UTC