Re: CURRENT Kernel makes the system run very very hot

the funny thing is, I thought I was crazy, but cpu overheating seems
to be happening to me too. I have 5 identical computers 2 of witch are
running FreeBSD 7.0 BETA1 and the other BETA3, this computer was
compiled fresh last weekend, and twice wile running Deluge torrent the
network cards stop working, and I reboot the computer,and it will not
even start it hangs on starting the ssh daemon, and xwindows will not
even start.
I thought this was just the nfe driver being flaky again. but maybe not.

if I leave the computer off for 20 minutes it boots perfect. bios
reports my CPU temp at 48C and 53C

again I have 2 Computers doing this with FreeBSD, the others Run
Fedora core 8 and have no trouble and are in the same eviroment.

the fedora core computers are at 29C and 31C


my info for one of the computers is below. I would be happy to do
anything neccary I could even arrange a root ssh on a public IP for
any devloper that would find it useful, again I have 5 computers
configured exactly the same, completly formating and fresh installing
one of them and letting someone screw with it for a week or so would
be no problem.


Sam Fourman Jr.

Sam# sysctl dev.cpu
dev.cpu.0.%desc: ACPI CPU
dev.cpu.0.%driver: cpu
dev.cpu.0.%location: handle=\_PR_.CPU0
dev.cpu.0.%pnpinfo: _HID=none _UID=0
dev.cpu.0.%parent: acpi0
dev.cpu.0.freq: 2388
dev.cpu.0.freq_levels: 2388/-1 2089/-1 1791/-1 1492/-1 1194/-1 895/-1
dev.cpu.0.cx_supported: C1/0
dev.cpu.0.cx_lowest: C1
dev.cpu.0.cx_usage: 100.00%
dev.cpu.1.%desc: ACPI CPU
dev.cpu.1.%driver: cpu
dev.cpu.1.%location: handle=\_PR_.CPU1
dev.cpu.1.%pnpinfo: _HID=none _UID=0
dev.cpu.1.%parent: acpi0
dev.cpu.1.cx_supported: C1/0
dev.cpu.1.cx_lowest: C1
dev.cpu.1.cx_usage: 100.00%
dev.cpu.2.%desc: ACPI CPU
dev.cpu.2.%driver: cpu
dev.cpu.2.%location: handle=\_PR_.CPU2
dev.cpu.2.%pnpinfo: _HID=none _UID=0
dev.cpu.2.%parent: acpi0
dev.cpu.2.cx_supported: C1/0
dev.cpu.2.cx_lowest: C1
dev.cpu.2.cx_usage: 100.00%
dev.cpu.3.%desc: ACPI CPU
dev.cpu.3.%driver: cpu
dev.cpu.3.%location: handle=\_PR_.CPU3
dev.cpu.3.%pnpinfo: _HID=none _UID=0
dev.cpu.3.%parent: acpi0
dev.cpu.3.cx_supported: C1/0
dev.cpu.3.cx_lowest: C1
dev.cpu.3.cx_usage: 100.00%

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-BETA3 #0: Fri Nov 16 22:20:33 UTC 2007
    root_at_logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU           _at_ 2.40GHz (2399.99-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f7  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 4
real memory  = 2146369536 (2046 MB)
avail memory = 2090807296 (1993 MB)
ACPI APIC Table: <Nvidia ASUSACPI>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0: Changing APIC ID to 4
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <Nvidia ASUSACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7fdf0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 924092406000924
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 924092406000924
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 924092406000924
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 924092406000924
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pci0: <memory, RAM> at device 1.0 (no driver attached)
pci0: <memory, RAM> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
pci0: <memory, RAM> at device 1.3 (no driver attached)
pci0: <memory, RAM> at device 1.4 (no driver attached)
pci0: <memory, RAM> at device 1.5 (no driver attached)
pci0: <memory, RAM> at device 1.6 (no driver attached)
pci0: <memory, RAM> at device 2.0 (no driver attached)
pci0: <memory, RAM> at device 2.1 (no driver attached)
pci0: <memory, RAM> at device 2.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem
0xec000000-0xecffffff,0xd0000000-0xdfffffff,0xea000000-0xebffffff irq
16 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xeffff000-0xefffffff irq
21 at device 11.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xefffe000-0xefffe0ff
irq 22 at device 11.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce MCP55 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 13.0 on
pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xf700-0xf70f mem
0xefffd000-0xefffdfff irq 23 at device 14.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xf200-0xf20f mem
0xefffc000-0xefffcfff irq 20 at device 14.1 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
atapci3: <nVidia nForce MCP55 SATA300 controller> port
0xf100-0xf107,0xf000-0xf003,0xef00-0xef07,0xee00-0xee03,0xed00-0xed0f
mem 0xefffb000-0xefffbfff irq 21 at device 14.2 on pci0
atapci3: [ITHREAD]
ata6: <ATA channel 0> on atapci3
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci3
ata7: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci4: <ACPI PCI bus> on pcib4
fwohci0: <VIA Fire II (VT6306)> port 0xcf00-0xcf7f mem
0xefbff000-0xefbff7ff irq 19 at device 11.0 on pci4
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:01:1e:3d:ab
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:d8:1e:3d:ab
fwe0: Ethernet address: 02:11:d8:1e:3d:ab
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:11:d8:00:01:1e:3d:ab _at_ 0xfffe00000000,
S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x7d910000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pcm0: <NVidia MCP55 High Definition Audio Controller> mem
0xefff0000-0xefff3fff irq 22 at device 15.1 on pci0
pcm0: [ITHREAD]
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xec00-0xec07 mem
0xefffa000-0xefffafff,0xefff9000-0xefff90ff,0xefff8000-0xefff800f irq
23 at device 17.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe0: Ethernet address: 00:1a:92:46:e0:44
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xeb00-0xeb07 mem
0xefff7000-0xefff7fff,0xefff6000-0xefff60ff,0xefff5000-0xefff500f irq
20 at device 18.0 on pci0
miibus1: <MII bus> on nfe1
e1000phy1: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus1
e1000phy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe1: Ethernet address: 00:1a:92:46:ed:f7
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
pcib5: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 20.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 22.0 on pci0
pci8: <ACPI PCI bus> on pcib8
atapci4: <SiI 3132 SATA300 controller> port 0x6f00-0x6f7f mem
0xef2ff000-0xef2ff07f,0xef2f8000-0xef2fbfff irq 16 at device 0.0 on
pci8
atapci4: [ITHREAD]
ata8: <ATA channel 0> on atapci4
ata8: [ITHREAD]
ata9: <ATA channel 1> on atapci4
ata9: [ITHREAD]
pcib9: <ACPI PCI-PCI bridge> at device 23.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 24.0 on pci0
pci10: <ACPI PCI bus> on pcib10
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub2: <Logitech Logitech G15 Keyboard, class 9/0, rev 1.10/1.03, addr
2> on uhub0
uhub2: 4 ports with 2 removable, bus powered
ukbd0: <Logitech Logitech Gaming Keyboard, class 0/0, rev 2.00/1.70,
addr 3> on uhub2
kbd2 at ukbd0
uhid0: <Logitech Logitech Gaming Keyboard, class 0/0, rev 2.00/1.70,
addr 3> on uhub2
uhid1: <G15 Keyboard G15 Keyboard, class 0/0, rev 2.00/1.03, addr 4> on uhub2
ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/21.00,
addr 5> on uhub0
ums0: 8 buttons and Z dir.
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acd0: DVDR <SONY DVD RW AW-Q170A/1.70> at ata0-master UDMA66
acd1: CDRW <SONY CD-RW CRX230EE/2YS8> at ata0-slave UDMA33
ad4: 152627MB <WDC WD1600JS-00NCB1 10.02E02> at ata2-master SATA300
ad6: 152627MB <WDC WD1600JS-00NCB1 10.02E02> at ata3-master SATA300
ad8: 152627MB <WDC WD1600JS-00NCB1 10.02E02> at ata4-master SATA300
pcm0: <HDA Codec: Analog Devices AD1988B>
pcm0: <HDA Driver Revision: 20071020_0048>
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Trying to mount root from ufs:/dev/ad4s1a
nfe0: link state changed to UP