Hi, After the recent commit of the new Areca (arcmsr) driver, I get this output during boot: arcmsr0: <Areca SATA Host Adapter RAID Controller (RAID6 capable) > mem 0xfc7ff000-0xfc7fffff,0xfc000000-0xfc3fffff irq 31 at device 14.0 on pci2 ARECA RAID ADAPTER0: Driver Version 1.20.00.15 2007-10-07 ARECA RAID ADAPTER0: FIRMWARE VERSION V1.43 2007-4-17 arcmsr0: [ITHREAD] .... snip .... Waiting 5 seconds for SCSI devices to settle (probe16:arcmsr0:0:16:0): inquiry data fails comparison at DV1 step ^^^ This line here ^^^ da0 at arcmsr0 bus 0 target 0 lun 0 da0: <Areca ARC-1120-VOL#00 R001> Fixed Direct Access SCSI-5 device da0: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) da0: 76293MB (156248064 512 byte sectors: 255H 63S/T 9725C) da1 at arcmsr0 bus 0 target 0 lun 1 da1: <Areca ARC-1120-VOL#01 R001> Fixed Direct Access SCSI-5 device da1: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) da1: 2784727MB (5703121920 512 byte sectors: 255H 63S/T 355002C) Not sure if it's anything to worry about (as I have no idea what it means), but doesn't seem to affect functionality at all Cheers PhilReceived on Mon Dec 10 2007 - 07:44:51 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:23 UTC