Hi all, We are experiencing a freezing system calling reboot(8) or shutdown(8) -r, shutdown(8) -p. I can also do a CTRL ALT DELETE. After syncing disks the system stops responding. From time to time there is still some hd activity, but maybe that's the controller itself. Something like: Syncing disks, syncing disks, buffers remaining 2 1 1 0 Uptime: 10m10s -> FREEZE <-- Any ideas ? The problem happens with 6.2-RELEASE. I see some unhandled mpt events during the boot phase. Maybe it's mpt0 which blocks or locks up the system after each boot ? A very strange issue is, that if I press the power-off button after such a lookup, I don't have any graphic output after the reboot, after a poweron on the same button until I plug the power out and turn it on again. Something is fundamentally broken here. But why does linux work here ? Martin Some facts: - Linux 2.4 or Linux 2.6 works perfectly, an acpi reboot works fine there. - The server is brand new. And no - there is no new bios upgrade available, we already checked that. - It happens with or without acpi - Disable or enable acpi in the loader doesn't help. It looks like the freeze happens before acpi can do anything. Even if ACPI_DEBUG is set, but doesn't help anything here. hw.acpi.handle_reboot=1 has no effect. After syncing disks we don't see any acpi messages. I don't see any output after syncing disk, even if hw.acpi.handle_reboot=1 is set. - hw.acpi.disable_on_reboot hasn't any effect too ... - The box has one dual core processor. It doesn't change anything if the GENERIC kernel is booted or the SMP kernel is used. Here's the full dmesg: CPU: Intel(R) Xeon(R) CPU 3060 _at_ 2.40GHz (2400.10-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 real memory = 2146238464 (2046 MB) avail memory = 2095136768 (1998 MB) ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <PTLTD RSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci8: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0 pci6: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci5: <ACPI PCI bus> on pcib3 mpt0: <LSILogic SAS/SATA Adapter> port 0x4000-0x40ff mem 0xd8010000-0xd8013fff,0xd8000000-0xd8 00ffff irq 16 at device 0.0 on pci5 mpt0: [GIANT-LOCKED] mpt0: MPI Version=1.5.13.0 mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). mpt0: mpt_cam_event: 0x12 mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required). mpt0: mpt_cam_event: 0x12 mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required). mpt0: mpt_cam_event: 0x16 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required). mpt0: mpt_cam_event: 0xb mpt0: Unhandled Event Notify Frame. Event 0xb (ACK not required). pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pci1: <ACPI PCI bus> on pcib4 bge0: <Broadcom BCM5750 C1, ASIC rev. 0x4201> mem 0xd8300000-0xd830ffff irq 16 at device 0.0 o n pci1 miibus0: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:14:5e:6b:14:8b pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 pci3: <ACPI PCI bus> on pcib5 bge1: <Broadcom BCM5750 C1, ASIC rev. 0x4201> mem 0xd8400000-0xd840ffff irq 17 at device 0.0 o n pci3 miibus1: <MII bus> on bge1 brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:14:5e:6b:14:8c uhci0: <UHCI (generic) USB controller> port 0x3000-0x301f irq 23 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0x3020-0x303f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0x3040-0x305f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0x3060-0x307f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <UHCI (generic) USB controller> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xd8600000-0xd86003ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci10: <ACPI PCI bus> on pcib6 pci10: <display, VGA> at device 4.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30a0-0x30a f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xe0000-0xe17ff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ukbd0: P.I. Engineering PC Keyboard/Mouse to USB Adapter, rev 1.10/3.11, addr 2, iclass 3/1 kbd2 at ukbd0 ums0: P.I. Engineering PC Keyboard/Mouse to USB Adapter, rev 1.10/3.11, addr 2, iclass 3/1 ums0: 5 buttons and Z dir. Timecounters tick every 1.000 msec acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4244N/1.02> at ata0-master UDMA33 ses0 at mpt0 bus 0 target 4 lun 0 ses0: <IBM SAS SES-2 DEVICE 01.0> Fixed Enclosure Services SCSI-3 device ses0: 300.000MB/s transfers ses0: SCSI-3 SES Device da0 at mpt0 bus 0 target 0 lun 0 da0: <LSILOGIC Logical Volume 3000> Fixed Direct Access SCSI-2 device da0: 300.000MB/s transfers, Tagged Queueing Enabled da0: 237464MB (486326272 512 byte sectors: 255H 63S/T 30272C) SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/da0s1a Martin Blapp, <mb_at_imp.ch> <mbr_at_FreeBSD.org> ------------------------------------------------------------------ ImproWare AG, UNIXSP & ISP, Zurlindenstrasse 29, 4133 Pratteln, CH Phone: +41 61 826 93 00 Fax: +41 61 826 93 01 PGP: <finger -l mbr_at_freebsd.org> PGP Fingerprint: B434 53FC C87C FE7B 0A18 B84C 8686 EF22 D300 551E ------------------------------------------------------------------Received on Fri Jan 19 2007 - 12:45:31 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:05 UTC