Hello, Sorry for cross-posting, but I'm not sure which is the proper mail list for this. I'm trying to boot latest FreeBSD 7 amd64 snapshot on Dell PE2850 (+2 year old server), but it panic (and freeze) every time on afd. afd in this case should be virtual floppy provided by DRAC (Dell Remote Access Controller) FreeBSD 7 - i386 boot without a problems, I'll try few other snapshots (6.2-stable amd64) to be sure that the problem is only in 7-current amd64 Here is result from verbose boot: GDB: debug ports: dcons GDB: current port: dcons KDB: debugger backends: ddb gdb KDB: current backend: ddb SMAP type=01 base=0000000000000000 len=000000000009e800 SMAP type=02 base=000000000009e800 len=0000000000001800 SMAP type=01 base=0000000000100000 len=00000000b36a0000 SMAP type=02 base=00000000b37a0000 len=000000000c800000 SMAP type=01 base=00000000bffa0000 len=0000000000020000 SMAP type=03 base=00000000bffc0000 len=000000000000fc00 SMAP type=02 base=00000000bffcfc00 len=000000000002f400 SMAP type=02 base=00000000e0000000 len=000000001ec90000 SMAP type=02 base=00000000fed00000 len=0000000000000400 SMAP type=02 base=00000000fee00000 len=0000000000010000 SMAP type=02 base=00000000ffb00000 len=0000000000500000 SMAP type=01 base=0000000100000000 len=0000000140000000 Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT-200706 #0: Thu Jun 7 21:38:42 UTC 2007 root_at_stiles.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Using 32 colors for the VM-PQ tuning (0, 0) Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80f98000. Preloaded mfs_root "/boot/mfsroot" at 0xffffffff80f98208. Calibrating clock(s) ... i8254 clock: 1193174 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3192223984 Hz CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3192.22-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0xf43 Stepping = 3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM ,PBE> Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNXT-ID,CX16,xTPR> AMD Features=0x20100800<SYSCALL,NX,LM> Logical CPUs per core: 2 usable memory = 8363180032 (7975 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages) 0x000000000109a000 - 0x00000000b379ffff, 2993709056 bytes (730886 pages) 0x00000000bffa0000 - 0x00000000bffbffff, 131072 bytes (32 pages) 0x0000000100000000 - 0x000000022f177fff, 5085036544 bytes (1241464 pages) avail memory = 8068014080 (7694 MB) ACPI APIC Table: <DELL PE BKC > INTR: Adding local APIC 6 as a target FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 3 APIC: CPU 2 has ACPI ID 2 APIC: CPU 3 has ACPI ID 4 ACPI: RSDP _at_ 0x0xfd650/0x0014 (v 0 DELL ) ACPI: RSDT _at_ 0x0xfd664/0x0038 (v 1 DELL PE BKC 0x00000001 MSFT 0x0100000A) ACPI: FACP _at_ 0x0xfd6b0/0x0074 (v 1 DELL PE BKC 0x00000001 MSFT 0x0100000A) ACPI: DSDT _at_ 0x0xbffc0000/0x388D (v 1 DELL PE BKC 0x00000001 MSFT 0x0100000E) ACPI: FACS _at_ 0x0xbffcfc00/0x0040 ACPI: APIC _at_ 0x0xfd724/0x00A8 (v 1 DELL PE BKC 0x00000001 MSFT 0x0100000A) ACPI: SPCR _at_ 0x0xfd7cc/0x0050 (v 1 DELL PE BKC 0x00000001 MSFT 0x0100000A) ACPI: HPET _at_ 0x0xfd81c/0x0038 (v 1 DELL PE BKC 0x00000001 MSFT 0x0100000A) ACPI: MCFG _at_ 0x0xfd854/0x003C (v 1 DELL PE BKC 0x00000001 MSFT 0x0100000A) MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 8 ioapic0: Routing external 8259A's -> intpin 0 MADT: Found IO APIC ID 9, Interrupt 32 at 0xfec80000 ioapic1: Changing APIC ID to 9 ioapic1: WARNING: intbase 32 != expected base 24 MADT: Found IO APIC ID 10, Interrupt 64 at 0xfec83000 ioapic2: Changing APIC ID to 10 ioapic2: WARNING: intbase 64 != expected base 56 MADT: Found IO APIC ID 11, Interrupt 96 at 0xfec84000 ioapic3: Changing APIC ID to 11 ioapic3: WARNING: intbase 96 != expected base 88 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic6: Routing NMI -> LINT1 lapic6: LINT1 trigger: edge lapic6: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high lapic7: Routing NMI -> LINT1 lapic7: LINT1 trigger: edge lapic7: LINT1 polarity: high MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 32-55 on motherboard ioapic2 <Version 2.0> irqs 64-87 on motherboard ioapic3 <Version 2.0> irqs 96-119 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 wlan_amrr: <AMRR Transmit Rate Control Algorithm> wlan: <802.11 Link Layer> ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> io: <I/O> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Jun 7 2007 21:38:33) acpi0: <DELL PE BKC> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 1 hz: 14318180 opts: leg_route count_size Timecounter "HPET" frequency 14318180 Hz quality 2000 acpi0: Power Button (fixed) pci_open(1): mode 1 addr port (0x0cf8) is 0x80080000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35908086) AcpiOsDerivePciId: \_SB_.PCI0.PBLO.D0F0.SCFG -> bus 4 dev 31 func 0 AcpiOsDerivePciId: \_SB_.PCI0.PBLO.D0F1.SCFG -> bus 4 dev 31 func 1 AcpiOsDerivePciId: \_SB_.PCI0.PBLO.D0F2.SCFG -> bus 4 dev 31 func 2 AcpiOsDerivePciId: \_SB_.PCI0.PBLO.D0F3.SCFG -> bus 4 dev 31 func 3 AcpiOsDerivePciId: \_SB_.PCI0.PBLO.D0F4.SCFG -> bus 4 dev 31 func 4 AcpiOsDerivePciId: \_SB_.PCI0.PBLO.D0F5.SCFG -> bus 4 dev 31 func 5 AcpiOsDerivePciId: \_SB_.PCI0.PBLO.D0F6.SCFG -> bus 4 dev 31 func 6 AcpiOsDerivePciId: \_SB_.PCI0.PBLO.D0F7.SCFG -> bus 4 dev 31 func 7 AcpiOsDerivePciId: \_SB_.PCI0.VPR0.D0F0.SCFG -> bus 0 dev 31 func 0 AcpiOsDerivePciId: \_SB_.PCI0.VPR0.D0F1.SCFG -> bus 0 dev 31 func 1 AcpiOsDerivePciId: \_SB_.PCI0.VPR0.D0F2.SCFG -> bus 0 dev 31 func 2 AcpiOsDerivePciId: \_SB_.PCI0.VPR0.D0F3.SCFG -> bus 0 dev 31 func 3 AcpiOsDerivePciId: \_SB_.PCI0.VPR0.D0F4.SCFG -> bus 0 dev 31 func 4 AcpiOsDerivePciId: \_SB_.PCI0.VPR0.D0F5.SCFG -> bus 0 dev 31 func 5 AcpiOsDerivePciId: \_SB_.PCI0.VPR0.D0F6.SCFG -> bus 0 dev 31 func 6 AcpiOsDerivePciId: \_SB_.PCI0.VPR0.D0F7.SCFG -> bus 0 dev 31 func 7 AcpiOsDerivePciId: \_SB_.PCI0.ISA_.P40C -> bus 0 dev 31 func 0 AcpiOsDerivePciId: \_SB_.PCI0.ISA_.P41C -> bus 0 dev 31 func 0 ACPI timer: 1/0 1/1 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 Validation 0 11 N 0 3 4 5 6 7 10 11 12 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 3 4 5 6 7 10 11 12 Validation 0 3 N 0 3 4 5 6 7 10 11 12 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 3 4 5 6 7 10 11 12 Validation 0 7 N 0 3 4 5 6 7 10 11 12 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 Validation 0 10 N 0 3 4 5 6 7 10 11 12 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 Validation 0 11 N 0 3 4 5 6 7 10 11 12 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 Validation 0 10 N 0 3 4 5 6 7 10 11 12 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 Validation 0 255 N 0 3 4 5 6 7 10 11 12 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 Validation 0 5 N 0 3 4 5 6 7 10 11 12 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x3590, revid=0x09 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3595, revid=0x09 bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 2 messages found-> vendor=0x8086, dev=0x3597, revid=0x09 bus=0, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0047, statreg=0x0018, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 2 messages found-> vendor=0x8086, dev=0x3598, revid=0x09 bus=0, slot=5, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 2 messages found-> vendor=0x8086, dev=0x3599, revid=0x09 bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0047, statreg=0x0018, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 2 messages found-> vendor=0x8086, dev=0x24d2, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0xace0, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x24d4, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0xacc0, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x24d7, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=7 map[20]: type I/O Port, range 32, base 0xaca0, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x24dd, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdff00000, size 10, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 23 found-> vendor=0x8086, dev=0x244e, revid=0xc2 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24d0, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x014f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24db, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type I/O Port, range 32, base 0xfc00, size 4, enabled map[24]: type Memory, range 32, base 0, size 10, memory disabled pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 3 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xdfc00000-0xdfefffff pcib1: prefetched decode 0xd8000000-0xd80fffff pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x8086, dev=0x0330, revid=0x06 bus=1, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit found-> vendor=0x8086, dev=0x0332, revid=0x06 bus=1, slot=0, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xdfd00000-0xdfefffff pcib2: prefetched decode 0xd8000000-0xd80fffff pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 found-> vendor=0x1028, dev=0x0013, revid=0x06 bus=2, slot=14, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0196, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D1 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type Prefetchable Memory, range 32, base 0xd80f0000, size 16, enabled pcib2: requested memory range 0xd80f0000-0xd80fffff: good pcib1: requested memory range 0xd80f0000-0xd80fffff: good map[18]: type Memory, range 32, base 0xdfdc0000, size 18, enabled pcib2: requested memory range 0xdfdc0000-0xdfdfffff: good pcib1: requested memory range 0xdfdc0000-0xdfdfffff: good pcib2: matched entry for 2.14.INTA pcib2: slot 14 INTA hardwired to IRQ 46 amr0: <LSILogic MegaRAID 1.53> mem 0xd80f0000-0xd80fffff,0xdfdc0000-0xdfdfffff irq 46 at device 14.0 on pci2 amr0: Using 64-bit DMA amr0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd80f0000 ioapic1: routing intpin 14 (PCI IRQ 46) to vector 49 amr0: [MPSAFE] amr0: [ITHREAD] amr0: delete logical drives supported by controller amr0: <LSILogic PERC 4e/Di> Firmware 521S, BIOS H430, 256MB RAM pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xf000-0xfff pcib3: no prefetched decode pci3: <ACPI PCI bus> on pcib3 pci3: physical bus=3 pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xf000-0xfff pcib4: no prefetched decode pci4: <ACPI PCI bus> on pcib4 pci4: physical bus=4 pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pcib5: secondary bus 5 pcib5: subordinate bus 7 pcib5: I/O decode 0xd000-0xefff pcib5: memory decode 0xdf700000-0xdfbfffff pcib5: no prefetched decode pci5: <ACPI PCI bus> on pcib5 pci5: physical bus=5 found-> vendor=0x8086, dev=0x0329, revid=0x09 bus=5, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit found-> vendor=0x8086, dev=0x032a, revid=0x09 bus=5, slot=0, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5 pcib6: secondary bus 6 pcib6: subordinate bus 6 pcib6: I/O decode 0xe000-0xefff pcib6: memory decode 0xdfa00000-0xdfbfffff pcib6: no prefetched decode pci6: <ACPI PCI bus> on pcib6 pci6: physical bus=6 found-> vendor=0x8086, dev=0x1076, revid=0x05 bus=6, slot=7, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdfae0000, size 17, enabled pcib6: requested memory range 0xdfae0000-0xdfafffff: good pcib5: requested memory range 0xdfae0000-0xdfafffff: good map[18]: type I/O Port, range 32, base 0xecc0, size 6, enabled pcib6: requested I/O range 0xecc0-0xecff: in range pcib5: requested I/O range 0xecc0-0xecff: in range pcib6: matched entry for 6.7.INTA pcib6: slot 7 INTA hardwired to IRQ 64 em0: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> port 0xecc0-0xecff mem 0xdfae0000-0xdfafffff irq 64 at device 7.0 on pci6 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdfae0000 em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0xecc0 em0: bpf attached em0: Ethernet address: 00:14:22:0e:e1:15 ioapic2: routing intpin 0 (PCI IRQ 64) to vector 50 em0: [FILTER] pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5 pcib7: secondary bus 7 pcib7: subordinate bus 7 pcib7: I/O decode 0xd000-0xdfff pcib7: memory decode 0xdf800000-0xdf9fffff pcib7: no prefetched decode pci7: <ACPI PCI bus> on pcib7 pci7: physical bus=7 found-> vendor=0x8086, dev=0x1076, revid=0x05 bus=7, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdf8e0000, size 17, enabled pcib7: requested memory range 0xdf8e0000-0xdf8fffff: good pcib5: requested memory range 0xdf8e0000-0xdf8fffff: good map[18]: type I/O Port, range 32, base 0xdcc0, size 6, enabled pcib7: requested I/O range 0xdcc0-0xdcff: in range pcib5: requested I/O range 0xdcc0-0xdcff: in range pcib7: matched entry for 7.8.INTA pcib7: slot 8 INTA hardwired to IRQ 65 em1: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> port 0xdcc0-0xdcff mem 0xdf8e0000-0xdf8fffff irq 65 at device 8.0 on pci7 em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdf8e0000 em1: Reserved 0x40 bytes for rid 0x18 type 4 at 0xdcc0 em1: bpf attached em1: Ethernet address: 00:14:22:0e:e1:16 ioapic2: routing intpin 1 (PCI IRQ 65) to vector 51 em1: [FILTER] pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pcib8: secondary bus 8 pcib8: subordinate bus 10 pcib8: I/O decode 0xc000-0xcfff pcib8: memory decode 0xdf400000-0xdf6fffff pcib8: no prefetched decode pci8: <ACPI PCI bus> on pcib8 pci8: physical bus=8 found-> vendor=0x8086, dev=0x0329, revid=0x09 bus=8, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit found-> vendor=0x8086, dev=0x032a, revid=0x09 bus=8, slot=0, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci8 pcib9: secondary bus 9 pcib9: subordinate bus 9 pcib9: I/O decode 0xc000-0xcfff pcib9: memory decode 0xdf500000-0xdf6fffff pcib9: no prefetched decode pci9: <ACPI PCI bus> on pcib9 pci9: physical bus=9 found-> vendor=0x8086, dev=0x1010, revid=0x01 bus=9, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xdf5e0000, size 17, enabled pcib9: requested memory range 0xdf5e0000-0xdf5fffff: good pcib8: requested memory range 0xdf5e0000-0xdf5fffff: good map[20]: type I/O Port, range 32, base 0xccc0, size 6, enabled pcib9: requested I/O range 0xccc0-0xccff: in range pcib8: requested I/O range 0xccc0-0xccff: in range pcib9: matched entry for 9.4.INTA pcib9: slot 4 INTA hardwired to IRQ 106 found-> vendor=0x8086, dev=0x1010, revid=0x01 bus=9, slot=4, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xdf5c0000, size 17, enabled pcib9: requested memory range 0xdf5c0000-0xdf5dffff: good pcib8: requested memory range 0xdf5c0000-0xdf5dffff: good map[20]: type I/O Port, range 32, base 0xcc80, size 6, enabled pcib9: requested I/O range 0xcc80-0xccbf: in range pcib8: requested I/O range 0xcc80-0xccbf: in range pcib9: matched entry for 9.4.INTB pcib9: slot 4 INTB hardwired to IRQ 107 em2: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> port 0xccc0-0xccff mem 0xdf5e0000-0xdf5fffff irq 106 at device 4.0 on pci9 em2: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdf5e0000 em2: Reserved 0x40 bytes for rid 0x20 type 4 at 0xccc0 em2: bpf attached em2: Ethernet address: 00:04:23:bb:21:8c ioapic3: routing intpin 10 (PCI IRQ 106) to vector 52 em2: [FILTER] em3: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> port 0xcc80-0xccbf mem 0xdf5c0000-0xdf5dffff irq 107 at device 4.1 on pci9 em3: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdf5c0000 em3: Reserved 0x40 bytes for rid 0x20 type 4 at 0xcc80 em3: bpf attached em3: Ethernet address: 00:04:23:bb:21:8d ioapic3: routing intpin 11 (PCI IRQ 107) to vector 53 em3: [FILTER] pcib10: <ACPI PCI-PCI bridge> at device 0.2 on pci8 pcib10: secondary bus 10 pcib10: subordinate bus 10 pcib10: I/O decode 0xf000-0xfff pcib10: no prefetched decode pci10: <ACPI PCI bus> on pcib10 pci10: physical bus=10 uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xace0-0xacff irq 16 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xace0 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 54 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xacc0-0xacdf irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xacc0 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 55 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xaca0-0xacbf irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xaca0 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 56 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 usb2: root hub problem, error=4 ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xdff00000-0xdff003ff irq 23 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xdff00000 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 57 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 usb3: root hub problem, error=4 pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib11: secondary bus 11 pcib11: subordinate bus 11 pcib11: I/O decode 0xb000-0xbfff pcib11: memory decode 0xdf200000-0xdf3fffff pcib11: prefetched decode 0xc8000000-0xd7ffffff pcib11: Subtractively decoded bridge. pci11: <ACPI PCI bus> on pcib11 pci11: physical bus=11 found-> vendor=0x1028, dev=0x0011, revid=0x00 bus=11, slot=5, func=0 class=ff-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xd7fff000, size 12, enabled pcib11: requested memory range 0xd7fff000-0xd7ffffff: good map[14]: type I/O Port, range 32, base 0xbcf8, size 3, enabled pcib11: requested I/O range 0xbcf8-0xbcff: in range map[18]: type I/O Port, range 32, base 0xbce8, size 3, enabled pcib11: requested I/O range 0xbce8-0xbcef: in range pcib11: matched entry for 11.5.INTA pcib11: slot 5 INTA hardwired to IRQ 20 found-> vendor=0x1028, dev=0x0012, revid=0x00 bus=11, slot=5, func=1 class=ff-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0103, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdf2ff000, size 12, enabled pcib11: requested memory range 0xdf2ff000-0xdf2fffff: good map[14]: type I/O Port, range 32, base 0xbc80, size 6, enabled pcib11: requested I/O range 0xbc80-0xbcbf: in range map[18]: type Prefetchable Memory, range 32, base 0xd7f00000, size 19, enabled pcib11: requested memory range 0xd7f00000-0xd7f7ffff: good pcib11: matched entry for 11.5.INTB pcib11: slot 5 INTB hardwired to IRQ 21 found-> vendor=0x1028, dev=0x0014, revid=0x00 bus=11, slot=5, func=2 class=ff-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0103, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x1095, dev=0x0680, revid=0x02 bus=11, slot=6, func=0 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0290, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xbcf0, size 3, enabled pcib11: requested I/O range 0xbcf0-0xbcf7: in range map[14]: type I/O Port, range 32, base 0xbce4, size 2, enabled pcib11: requested I/O range 0xbce4-0xbce7: in range map[18]: type I/O Port, range 32, base 0xbcd8, size 3, enabled pcib11: requested I/O range 0xbcd8-0xbcdf: in range map[1c]: type I/O Port, range 32, base 0xbcd0, size 2, enabled pcib11: requested I/O range 0xbcd0-0xbcd3: in range map[20]: type I/O Port, range 32, base 0xbc70, size 4, enabled pcib11: requested I/O range 0xbc70-0xbc7f: in range map[24]: type Memory, range 32, base 0xdf2fec00, size 8, enabled pcib11: requested memory range 0xdf2fec00-0xdf2fecff: good pcib11: matched entry for 11.6.INTA pcib11: slot 6 INTA hardwired to IRQ 23 found-> vendor=0x1002, dev=0x5159, revid=0x00 bus=11, slot=13, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x01a7, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xc8000000, size 27, enabled pcib11: requested memory range 0xc8000000-0xcfffffff: good map[14]: type I/O Port, range 32, base 0xb800, size 8, enabled pcib11: requested I/O range 0xb800-0xb8ff: in range map[18]: type Memory, range 32, base 0xdf2e0000, size 16, enabled pcib11: requested memory range 0xdf2e0000-0xdf2effff: good pcib11: matched entry for 11.13.INTA pcib11: slot 13 INTA hardwired to IRQ 18 pci11: <unknown> at device 5.0 (no driver attached) uart0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xbc80 pcib11: uart0 requested I/O range 0xbc80-0xbcbf: in range uart0: <Non-standard ns8250 class UART with FIFOs> port 0xbc80-0xbcbf mem 0xdf2ff000-0xdf2fffff,0xd7f00000-0xd7f7ffff irq 21 at device 5.1 on pci11 pcib11: uart0 requested I/O range 0xbc80-0xbcbf: in range ioapic0: routing intpin 21 (PCI IRQ 21) to vector 58 uart0: [FILTER] uart0: fast interrupt pci11: <unknown> at device 5.2 (no driver attached) atapci0: <SiI 0680 UDMA133 controller> port 0xbcf0-0xbcf7,0xbce4-0xbce7,0xbcd8-0xbcdf,0xbcd0-0xbcd3,0xbc70-0xbc7f mem 0xdf2fec00-0xdf2fecf f irq 23 at device 6.0 on pci11 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbc70 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: Reserved 0x100 bytes for rid 0x24 type 3 at 0xdf2fec00 ata2: <ATA channel 0> on atapci0 ata2: reset tp1 mask=03 ostat0=40 ostat1=40 ata2: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata2: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata2: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: reset tp1 mask=03 ostat0=7f ostat1=7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: reset tp2 stat0=ff stat1=ff devices=0x0 ata3: [MPSAFE] ata3: [ITHREAD] vgapci0: <VGA-compatible display> port 0xb800-0xb8ff mem 0xc8000000-0xcfffffff,0xdf2e0000-0xdf2effff irq 18 at device 13.0 on pci11 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00 ata0: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=00 ostat1=01 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x01 err=0x04 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=00 stat1=01 devices=0x4<ATAPI_MASTER> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 59 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1: stat0=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x0 ioapic0: routing intpin 15 (ISA IRQ 15) to vector 60 ata1: [MPSAFE] ata1: [ITHREAD] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 73 ioapic0: routing intpin 6 (ISA IRQ 6) to vector 61 fdc0: [FILTER] device_attach: fdc0 attach returned 12 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console ioapic0: routing intpin 4 (ISA IRQ 4) to vector 61 sio0: [FILTER] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 73 ioapic0: routing intpin 6 (ISA IRQ 6) to vector 62 fdc0: [FILTER] device_attach: fdc0 attach returned 12 ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 10: ioport 0xac00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed ex_isa_identify() fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcbfff,0xd2800-0xd37ff,0xec000-0xeffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0xffffffff (1) kbdc: RESET_KBD return code:00fe kbdc: RESET_KBD return code:00fe kbdc: RESET_KBD return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 atkbd: failed to reset the keyboard. kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 62 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 241051 -> 100000 procfs registered lapic: Divisor 2, Frequency 99756996 hz Timecounter "TSC" frequency 3192223984 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached rr232x: no controller detected. md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80b961b8 ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on ICH5 chip acd0: setting UDMA33 on ICH5 chip acd0: <TEAC CD-ROM CD-224E/K.9A> CDROM drive at ata0 as master acd0: read 4134KB/s (4134KB/s), 128KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata2-slave: pio=PIO3 wdma=UNSUPPORTED udma=UNSUPPORTED cable=40 wire ata2-master: pio=PIO3 wdma=UNSUPPORTED udma=UNSUPPORTED cable=40 wire afd0: setting PIO3 on SiI 0680 chip afd0: (no media) <VIRTUALFLOPPY DRIVE Floppy > at ata2-master PIO3 Fatal trap 18: integer divide fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x8:0xffffffff802522f7 stack pointer = 0x10:0xffffffff80f9cba0 frame pointer = 0x10:0xffffffff80f9cc20 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) [thread pid 0 tid 0 ] Stopped at afd_attach+0x2c7: divq %rcx,%eax db> At this point the machine freezes and i cannot trace or whatever. P.S. please include me in CC as I'm not subscribed to both lists. -- Best Wishes, Stefan Lambrev ICQ# 24134177Received on Tue Jul 03 2007 - 10:16:36 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:13 UTC