Hi, I trying out an IBM X3455 which has 2 Broadcom BCM5704. they work ok under -stable, but -current just reboots without a trace, no panic, no nothing - actually some garbage on the serial port. I tried wit/and without msi. this is what i get under -stable: bge0_at_pci2:1:0: class=0x020000 card=0x02a61014 chip=0x164814e4 rev=0x10 hdr=0x00 vendor = 'Broadcom Corporation' device = 'BCM5704 NetXtreme Dual Gigabit Adapter' class = network subclass = ethernet cap 07[40] = PCI-X 64-bit supports 133MHz, 2048 burst read, 1 split transaction cap 01[48] = powerspec 2 supports D0 D3 current D0 cap 03[50] = VPD cap 05[58] = MSI supports 8 messages, 64 bit bge1_at_pci2:1:1: class=0x020000 card=0x02a61014 chip=0x164814e4 rev=0x10 hdr=0x00 vendor = 'Broadcom Corporation' device = 'BCM5704 NetXtreme Dual Gigabit Adapter' class = network subclass = ethernet cap 07[40] = PCI-X 64-bit supports 133MHz, 2048 burst read, 1 split transaction cap 01[48] = powerspec 2 supports D0 D3 current D0 cap 03[50] = VPD cap 05[58] = MSI supports 8 messages, 64 bitReceived on Tue Jul 03 2007 - 10:54:43 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:13 UTC