Jeff Roberson schreef: > http://people.freebsd.org/~jeff/ule.diff > > This patch is scheduled for inclusion in 7.0. I would like anyone who > cares to run it to validate that it does not create any stability or > performance regression over the existing ULE. This patch replaces ULE > with SCHED_SMP, which will now no longer exist as a seperate fork of ULE. [..] I cvsupped this evening at 19:34 UTC. The new ULE scheduler works fine in single-user mode (it survives "make kernel"), but when I go to multi-user mode I get a "sched_add: trying to run inhibited thread" panic (2 vmcores lost due to fsck :( ) This is on a SMP dualcore Intel T5600 laptop (dmesg + kernelconfig attached) Could it be caused by some user process (pgsql / boinc) ? Well, at least the 4BSD continues to run... Regards, Rene -- GPG fingerprint = E738 5471 D185 7013 0EE0 4FC8 3C1D 6F83 12E1 84F6 (subkeys.pgp.net) "It won't fit on the line." -- me, 2001 WARNING: WITNESS option enabled, expect reduced performance. ACPI APIC Table: <AMI OEMAPIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 CPU T5600 _at_ 1.83GHz (1828.77-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 real memory = 2147287040 (2047 MB) avail memory = 2095534080 (1998 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <_ASUS_ Notebook> on motherboard acpi0: [ITHREAD] acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 2000 acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7ff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_asus0: Unsupported Asus laptop: A6Je pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xb000-0xb0ff mem 0xc0000000-0xcfffffff,0xfdff0000-0xfdffffff irq 16 at device 0.0 on pci1 acpi_video0: <ACPI video extension> on vgapci0 pcm0: <Intel 82801G High Definition Audio Controller> mem 0xfebfc000-0xfebfffff irq 21 at device 27.0 on pci0 pcm0: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xc800-0xc8ff mem 0xfe0ff000-0xfe0fffff irq 16 at device 0.0 on pci2 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: Ethernet address: 00:18:f3:b7:89:34 re0: [FILTER] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <network> at device 0.0 (no driver attached) uhci0: <UHCI (generic) USB controller> port 0xec00-0xec1f irq 23 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xe880-0xe89f irq 20 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0xe800-0xe81f irq 22 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0xe480-0xe49f irq 18 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb3: <UHCI (generic) USB controller> on uhci3 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfebfbc00-0xfebfbfff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 uhub4: 8 ports with 8 removable, self powered ugen0: <Syntek USB2.0, class 0/0, rev 2.00/0.05, addr 2> on uhub4 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci4: <ACPI PCI bus> on pcib4 cbb0: <RF5C476 PCI-CardBus Bridge> irq 17 at device 1.0 on pci4 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [ITHREAD] fwohci0: <Ricoh R5C552> mem 0xfeaff800-0xfeafffff irq 18 at device 1.1 on pci4 fwohci0: [FILTER] fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:e0:18:00:03:76:52:e9 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode pci4: <base peripheral> at device 1.2 (no driver attached) pci4: <base peripheral> at device 1.3 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7M SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 speaker0: <PC speaker> port 0x61 on acpi0 acpi_asus0: Unsupported Asus laptop: A6Je pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ubt0: <vendor 0x0b05 product 0x1712, class 224/1, rev 2.00/19.15, addr 2> on uhub2 ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2 ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPacketSize=49; nframes=6, buffer size=294 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ad0: 114473MB <Hitachi HTS541612J9SA00 SBDOC70P> at ata0-master SATA150 acd0: DVDR <TSSTcorpCD/DVDW TS-L632D/AS05> at ata1-master UDMA33 pcm0: <HDA Codec: Realtek ALC660> pcm0: <HDA Driver Revision: 20070710_0047> SMP: AP CPU #1 Launched! WARNING: WITNESS option enabled, expect reduced performance. # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # machine i386 cpu I686_CPU ident RENE # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols # Debugging for use in -current options KDB # Enable kernel debugger support. options DDB # Support DDB. options KDB_TRACE options GDB # Support remote GDB. options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options SCHED_ULE # ULE scheduler only runs BOINC 1/2 time ? --> current! PANICS !! options SCHED_4BSD # works with BOINC as expected, no panic options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options MD_ROOT # MD is a potential root device options CD9660 # ISO 9660 Filesystem options COMPAT_43TTY # Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options COMPAT_FREEBSD6 # Compatible with FreeBSD6 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. options ADAPTIVE_GIANT # Giant mutex is adaptive. options SMP # Dual core T5600 device apic # I/O APIC options STOP_NMI # stop CPUs with NMI instead of IPI # Bus support. device eisa device pci # ATA and ATAPI devices device ata # as module ? device atadisk # ATA disk drives # as module ? options ATA_STATIC_ID # Static device numbering # SCSI peripherals device scbus # SCSI bus (required for SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct SCSI access) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc device agp # support several AGP chipsets, required for drm # drm/radeon not supported yet for RV515 (Radeon Mobility X1450) :( device drm device radeondrm # Add suspend/resume support for the i8254. device pmtimer # Pseudo devices. device loop # Network loopback device ether # Ethernet support device pty # Pseudo-ttys (telnet etc) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device usb # USB Bus (required) #added options VESA options DEVICE_POLLING device wlan device wlan_wep device wlan_amrr device wlan_scan_sta device wlan_scan_apReceived on Wed Jul 18 2007 - 19:20:14 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:14 UTC