Jeff Roberson wrote: > Even "works for me!" type responses are welcome so I know roughly how many > people have tested before I commit this close to release. > OK, it's not provable, but so far it doesn't have any little "hangs" like it used to (5-10sec). I've done a full buildworld/kernel with it while working on things in openoffice. Seems to all be happy. Thanks! Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT #1: Wed Jul 18 13:03:41 PDT 2007 root_at_localhost:/usr/obj/usr/src/sys/MONTEZUMA WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193203 Hz quality 0 CPU: Genuine Intel(R) CPU T2600 _at_ 2.16GHz (2161.31-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8 Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xc1a9<SSE3,MON,VMX,EST,TM2,xTPR,PDCM> AMD Features=0x100000<NX> Cores per package: 2 real memory = 3219980288 (3070 MB) avail memory = 3145490432 (2999 MB) ACPI APIC Table: <LENOVO TP-79 > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 Security auditing service present BSM auditing present ACPI Warning (tbfadt-0505): Optional field "Gpe1Block" has zero address or length: 0 102C/0 [20070320] ioapic0: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 kqemu version 0x00010300 kqemu: KQEMU installed, max_locked_mem=1565832kB. ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) cryptosoft0: <software crypto> on motherboard acpi0: <LENOVO TP-79> on motherboard acpi0: [ITHREAD] acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 2000 acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, bff00000 (3) failed acpi0: reservation of fec00000, 140000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xd0000000-0xdfffffff,0xee100000-0xee10ffff irq 16 at device 0.0 on pci1 pcm0: <Intel 82801G High Definition Audio Controller> mem 0xee400000-0xee403fff irq 17 at device 27.0 on pci0 pcm0: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 em0: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> port 0x3000-0x301f mem 0xee000000-0xee01ffff irq 16 at device 0.0 on pci2 em0: Ethernet address: 00:16:41:58:25:48 em0: [ITHREAD] pcib3: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib3 ath0: <Atheros 5212> mem 0xedf00000-0xedf0ffff irq 17 at device 0.0 on pci3 ath0: [ITHREAD] ath0: using obsoleted if_watchdog interface ath0: Ethernet address: 00:16:cf:7b:0d:0d ath0: mac 10.3 phy 6.1 radio 10.2 pcib4: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0 pci12: <ACPI PCI bus> on pcib5 uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 17 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 19 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb3: <UHCI (generic) USB controller> on uhci3 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xee404000-0xee4043ff irq 19 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 uhub4: 8 ports with 8 removable, self powered pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci21: <ACPI PCI bus> on pcib6 cbb0: <TI1510 PCI-CardBus Bridge> mem 0xe4300000-0xe4300fff irq 16 at device 0.0 on pci21 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [ITHREAD] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1880-0x188f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] atapci1: <Intel ICH7M SATA300 controller> port 0x18c8-0x18cf,0x18ac-0x18af,0x18c0-0x18c7,0x18a8-0x18ab,0x18b0-0x18bf mem 0xee404400-0xee4047ff irq 16 at device 31.2 on pci0 atapci1: [ITHREAD] atapci1: AHCI Version 01.10 controller with 4 ports detected ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: port not implemented ata3: [ITHREAD] ata4: <ATA channel 2> on atapci1 ata4: port not implemented ata4: [ITHREAD] ata5: <ATA channel 3> on atapci1 ata5: port not implemented ata5: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 speaker0: <PC speaker> port 0x61 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xdc000-0xdffff,0xe0000-0xeffff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ugen0: <STMicroelectronics Biometric Coprocessor, class 0/0, rev 1.00/0.01, addr 2> on uhub3 NULL mp in getnewvnode() Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert enabled, rule-based forwarding disabled, default to deny, logging limited to 10 packets/entry by default acd0: DVDR <HL-DT-ST DVDRAM GSA-4083N/1.08> at ata0-master UDMA33 ad4: 95396MB <Seagate ST910021AS 4.06> at ata2-master SATA150 pcm0: <HDA Codec: Analog Devices AD1981HD> pcm0: <HDA Driver Revision: 20070619_0045> SMP: AP CPU #1 Launched! WARNING: WITNESS option enabled, expect reduced performance. cd0 at ata0 bus 0 target 0 lun 0 cd0: <HL-DT-ST DVDRAM GSA-4083N 1.08> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers Trying to mount root from ufs:/dev/ad4s1a -- Louis Kowolowski KE7BAX louisk_at_cryptomonkeys.com Cryptomonkeys: http://www.cryptomonkeys.com/~louisk Warning: Do not point laser at remaining eye!
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:14 UTC