Hi, All. I have notebook with NVIDIA based network adapter and video. >From dmesg: nvidia0: <GeForce Go 6100> mem 0xc2000000-0xc2ffffff,0xd0000000-0xdfffffff,0xc1000000-0xc1ffffff irq 5 at device 5.0 on pci0 nvidia0: [GIANT-LOCKED] nvidia0: [ITHREAD] ... nfe0: <NVIDIA nForce 430 MCP13 Networking Adapter> port 0x30b8-0x30bf mem 0xc0007000-0xc0007fff irq 5 at device 20.0 on pci0 miibus0: <MII bus> on nfe0 rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto nfe0: Ethernet address: 00:90:f5:4f:18:1b nfe0: [FILTER] Some time ago i've used nve(4) and nvidia-driver without problems. But nve(4) is buggy and sometimes have watchdog timeouts. After switching to nfe(4) i can't use x11/nvidia-driver. After some time of running, Xorg process takes 100% of resources and system not responds. But i can power off my system via ACPI. After reboot i have following messages in the /var/log/messages: Jul 20 16:26:51 btr-nb kernel: nfe0: watchdog timeout (missed Tx interrupts) -- recovering Jul 20 16:27:39 btr-nb last message repeated 3 times Jul 20 16:27:58 btr-nb kernel: nfe0: watchdog timeout (missed Tx interrupts) -- recovering Jul 20 16:28:08 btr-nb kernel: acpi_button0: power button pressed nfe(4) without x11/nvidia-driver and x11/nvidia-driver without nfe(4) works stable. But i want use both nfe(4) and x11/nvidia-driver... Can somebody suggest me some tricks? -- WBR, Andrey V. ElsukovReceived on Mon Jul 23 2007 - 07:35:37 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:15 UTC