Jeremy Chadwick wrote: > On Tue, Nov 06, 2007 at 03:31:35AM -0500, Aryeh M. Friedman wrote: > >> Xin LI wrote: >> >>> Yes (so that you get the correct speed of ICH9, ironically I have >>> misunderstood the spec). I am working on a new patch. >>> >> The speeds are still incorrect (150 instead of 300) >> > > According to the thread and Wiki data I see, you're complaining that the > following two devices on your SATA bus are SATA150 when they should be > SATA300, correct? > > Master: ad8 <ST3500630AS/3.AAE> Serial ATA v1.0 > Master: acd0 <TSSTcorpCD/DVDW SH-S183L/SB01> Serial ATA v1.0 > yes btw due to god knows what reason the patch renumbered ad8 to ad6 > 1) Have you verified that the SATA150-limiting jumper on your Seagate > drive has been removed? SATA300 drives from Seagate come from the > factory with that jumper connected, limiting the drive to SATA150. > I will check but: 1. I was unaware of this "feature" 2. I didn't see any jumpers when I installed it > 2) Do you happen to be using a PATA-to-SATA adapter on the DVD drive? > It is native SATA (300) > 3) If No to #2, are you sure that the ICH9 does SATA300 with ATAPI > devices? Does the mainboard BIOS even support it for ATAPI? > Mobo has ATAPI I am not sure about the IHC issue though... will look it up and get back to you. -- Aryeh M. Friedman Developer, not business, friendly http://www.flosoft-systems.comReceived on Tue Nov 06 2007 - 08:37:38 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:21 UTC