> >> >> Does SATA300, but has the same "feature" as the OP's Seagate drive: >> a small jumper that limits the drive to SATA150 unless removed. >> See below PDF. >> >> http://www.seagate.com/ww/v/index.jsp?vgnextoid=e2af99f4fa74c010VgnVCM100000dd04090aRCRD&locale=en-US >> http://www.seagate.com/staticfiles/support/disc/manuals/desktop/Barracuda%207200.10/100402371h.pdf >> > > Jeremy, > > Thanks! Like Aryeh, I missed the jumper. I'll test this out tonight when > I get home. > > Rusty > I removed the jumpers per the doc and unfortunately, there was no change: ad12: 715404MB <Seagate ST3750640AS 3.AAK> at ata6-master SATA150 ad16: 715404MB <Seagate ST3750640AS 3.AAK> at ata8-master SATA150 ATA channel 5: Master: ad10 <WDC WD1500ADFD-00NLR1/20.07P20> Serial ATA v1.0 Slave: no device present ATA channel 6: Master: ad12 <ST3750640AS/3.AAK> Serial ATA II Slave: no device present ATA channel 7: Master: acd0 <LITE-ON DVDRW LH-20A1L/BL01> Serial ATA v1.0 Slave: no device present ATA channel 8: Master: ad16 <ST3750640AS/3.AAK> Serial ATA II Slave: no device present It seems there is either a configuration I'm missing or the kernel is not picking this up properly. Sincerely, Rusty NejdlReceived on Wed Nov 07 2007 - 04:05:00 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:21 UTC