> Quick updates: > > 1. The marvel patch posted by Xi Lin reconizes PATA drives but doesn't > fix the speed mismatch on SATA and/or the acd issues (I think that is > the case for the second issue)... I have 2 PATA drives, 1 SATA HDD and a > SATA DVD-RW all working fine now (the DVD still experiences the acd > issues) > > -- > Aryeh M. Friedman > Developer, not business, friendly > http://www.flosoft-systems.com I was following along on this discussion and noticed that my SATA drives are also showing up as 150's. Attached is DMESG output since reboot. This is an ASUS p5b deluxe motherboard with the ICH8 controller: <Intel ICH8 SATA300 controller> and the Micron controller: <JMicron JMB363 SATA300 controller> Not sure if this is related to this discussion or not. Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-BETA2 #0: Sat Nov 3 17:13:14 CDT 2007 root_at_tethys.ringofsaturn.com:/usr/obj/usr/src/sys/SATURN Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 CPU 6700 _at_ 2.66GHz (2666.68-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 real memory = 2616786944 (2495 MB) avail memory = 2552987648 (2434 MB) MPTable: <P5B Deluxe > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Assuming intbase of 0 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) cpu0 on motherboard cpu1 on motherboard pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pcib1: <MPTable PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x8c00-0x8c7f mem 0xfd000000-0xfdffffff,0xa0000000-0xbfffffff,0xfc000000-0xfcffffff irq 16 at device 0.0 on pci1 uhci0: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 16 at device 26.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 17 at device 26.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 18 at device 26.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 4 ports with 4 removable, self powered ugen0: <vendor 0x0bda RTL8187_Wireless, class 0/0, rev 2.00/1.00, addr 2> on uhub2 pcm0: <Intel 82801H High Definition Audio Controller> mem 0xfebf8000-0xfebfbfff irq 22 at device 27.0 on pci0 pcm0: [ITHREAD] pcib2: <PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci4: <PCI bus> on pcib2 pcib3: <MPTable PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci3: <PCI bus> on pcib3 atapci0: <JMicron JMB363 SATA300 controller> port 0xac00-0xac07,0xa880-0xa883,0xa800-0xa807,0xa480-0xa483,0xa400-0xa40f mem 0xfe9fe000-0xfe9fffff irq 16 at device 0.0 on pci3 atapci0: [ITHREAD] atapci0: AHCI Version 01.00 controller with 2 ports detected ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 ata4: [ITHREAD] pcib4: <MPTable PCI-PCI bridge> irq 17 at device 28.5 on pci0 pci2: <PCI bus> on pcib4 mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0x9800-0x98ff mem 0xfe8fc000-0xfe8fffff irq 17 at device 0.0 on pci2 msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x02> on mskc0 msk0: Ethernet address: 00:18:f3:b3:b6:bd miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto mskc0: [FILTER] uhci2: <UHCI (generic) USB controller> port 0xd480-0xd49f irq 23 at device 29.0 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb3: <UHCI (generic) USB controller> on uhci2 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 19 at device 29.1 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: <UHCI (generic) USB controller> on uhci3 usb4: USB revision 1.0 uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 18 at device 29.2 on pci0 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: <UHCI (generic) USB controller> on uhci4 usb5: USB revision 1.0 uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 uhub5: 2 ports with 2 removable, self powered ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfebff800-0xfebffbff irq 23 at device 29.7 on pci0 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each: usb3 usb4 usb5 usb6: <EHCI (generic) USB 2.0 controller> on ehci1 usb6: USB revision 2.0 uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6 uhub6: 6 ports with 6 removable, self powered pcib5: <MPTable PCI-PCI bridge> at device 30.0 on pci0 pci5: <PCI bus> on pcib5 fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfeaff800-0xfeafffff,0xfeaf8000-0xfeafbfff irq 21 at device 3.0 on pci5 fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:f5:92:3c fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:d8:f5:92:3c fwe0: Ethernet address: 02:11:d8:f5:92:3c sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode skc0: <Marvell Gigabit Ethernet> port 0xb800-0xb8ff mem 0xfeaf4000-0xfeaf7fff irq 19 at device 4.0 on pci5 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:18:f3:b3:b2:7c miibus1: <MII bus> on sk0 e1000phy1: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus1 e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto skc0: [ITHREAD] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH8 SATA300 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f,0xe080-0xe08f irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] ata5: <ATA channel 0> on atapci1 ata5: [ITHREAD] ata6: <ATA channel 1> on atapci1 ata6: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci2: <Intel ICH8 SATA300 controller> port 0xd400-0xd407,0xd080-0xd083,0xd000-0xd007,0xcc00-0xcc03,0xc880-0xc88f,0xc800-0xc80f irq 19 at device 31.5 on pci0 atapci2: [ITHREAD] ata7: <ATA channel 0> on atapci2 ata7: [ITHREAD] ata8: <ATA channel 1> on atapci2 ata8: [ITHREAD] pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xcf000-0xd07ff,0xd0800-0xd37ff,0xd3800-0xd4fff pnpid ORM0000 on isa0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: [ITHREAD] ata1 at port 0x170-0x177,0x376 irq 15 on isa0 ata1: [ITHREAD] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FILTER] ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <INT0800> can't assign resources (memory) uscanner0: <Canon CanoScan, class 255/0, rev 1.10/1.00, addr 2> on uhub4 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ad10: 143089MB <WDC WD1500ADFD-00NLR1 20.07P20> at ata5-master SATA150 ad12: 715404MB <Seagate ST3750640AS 3.AAK> at ata6-master SATA150 acd0: DVDR <LITE-ON DVDRW LH-20A1L/BL01> at ata7-master SATA150 ad16: 715404MB <Seagate ST3750640AS 3.AAK> at ata8-master SATA150 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 pcm0: <HDA Codec: Analog Devices AD1988B> pcm0: <HDA Driver Revision: 20071020_0048> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 SMP: AP CPU #1 Launched! cd0 at ata7 bus 0 target 0 lun 0 cd0: <LITE-ON DVDRW LH-20A1L BL01> Removable CD-ROM SCSI-0 device cd0: 3.300MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed Trying to mount root from ufs:/dev/ad10s1a sk0: link state changed to UP msk0: link state changed to UP pid 98970 (conftest), uid 0: exited on signal 12 (core dumped) Warning: pid 85051 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 85051 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 85051 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 85051 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 85051 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 85051 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 85051 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 85051 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 85051 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 85051 used static ldt allocation. See the i386_set_ldt man page for more info free inode /usr/home/4499196 had 672 blocks free inode /usr/home/4499219 had 328 blocksReceived on Tue Nov 06 2007 - 13:19:16 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:21 UTC