Michael Butler wrote this message on Sun, Sep 30, 2007 at 18:02 -0400: > Marius Strobl wrote: > > As mentioned in UPDATING the change below requires the hal port > > to be recompiled in order to continue to work. On !386 you > > additionally need to update to xorg-server-1.4_1,1. > > Regarding common ports affected by the introduction of support > > for PCI domains these two ports should be it. > > Other consumers of <sys/pciio.h> potentially also need to be > > recompiled and adjusted, f.e. sjog needs to be recompiled but > > should need no changes. Generally, if a port uses pc_bus it > > also needs to deal with pc_domain now. > > This breaks [ls|set]pci even when recompiled. > > It also breaks my ability to use an /etc/rc.early containing .. > > pciconf -wb pci0:30:0 0x1a 8 > > .. which is required to allow any cardbus devices, e.g. Netgear WG511T, > to work. The problem is that we don't (and nor does the BIOS) properly > set the subordinate bus of the parent PCI-PCI bridge and the above > command sets it 'manually'. Is there a PR for this? Could you send a verbose boot message for this? It shouldn't be hard to fix, and pretty easy one to fix too. -- John-Mark Gurney Voice: +1 415 225 5579 "All that I will do, has been done, All that I have, has not."Received on Mon Oct 15 2007 - 21:57:00 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:19 UTC