On 9/17/07, Sam Banks <w0lfie_at_clear.net.nz> wrote: > Out of interest, what USB host controller are each of you > running? UHCI or OHCI? > > Sam. Here is my Full dmesg for -current , don't ask me what the tcp errors are at the end I have no idea. if someone knows please drop me a hint on how to fix it. Sam Fourman Jr. Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-20070814-SNAP #0: Tue Aug 14 10:20:29 UTC 2007 root_at_builder.snapshots.us.freebsd.org:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. ACPI APIC Table: <Nvidia ASUSACPI> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Quad CPU _at_ 2.40GHz (2399.99-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6f7 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> Cores per package: 4 real memory = 2146369536 (2046 MB) avail memory = 2082390016 (1985 MB) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0: Changing APIC ID to 4 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <Nvidia ASUSACPI> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7fdf0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 924092406000924 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 924092406000924 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2: <ACPI CPU> on acpi0 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 924092406000924 device_attach: est2 attach returned 6 p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3: <ACPI CPU> on acpi0 est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 924092406000924 device_attach: est3 attach returned 6 p4tcc3: <CPU Frequency Thermal Control> on cpu3 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) pci0: <memory, RAM> at device 0.6 (no driver attached) pci0: <memory, RAM> at device 0.7 (no driver attached) pci0: <memory, RAM> at device 1.0 (no driver attached) pci0: <memory, RAM> at device 1.1 (no driver attached) pci0: <memory, RAM> at device 1.2 (no driver attached) pci0: <memory, RAM> at device 1.3 (no driver attached) pci0: <memory, RAM> at device 1.4 (no driver attached) pci0: <memory, RAM> at device 1.5 (no driver attached) pci0: <memory, RAM> at device 1.6 (no driver attached) pci0: <memory, RAM> at device 2.0 (no driver attached) pci0: <memory, RAM> at device 2.1 (no driver attached) pci0: <memory, RAM> at device 2.2 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci1: <ACPI PCI bus> on pcib1 nvidia0: <GeForce 8800 GTS> port 0xdf00-0xdf7f mem 0xec000000-0xecffffff,0xd0000000-0xdfffffff,0xea000000-0xebffffff irq 16 at device 0.0 on pci1 nvidia0: [GIANT-LOCKED] nvidia0: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pci0: <memory, RAM> at device 9.0 (no driver attached) isab0: <PCI-ISA bridge> at device 10.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 10.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xeffff000-0xefffffff irq 21 at device 11.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 10 ports with 10 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xefffe000-0xefffe0ff irq 22 at device 11.1 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: EHCI version 1.0 usb1: companion controller, 10 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1 uhub1: 10 ports with 10 removable, self powered atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 13.0 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] atapci1: <nVidia nForce MCP55 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xf700-0xf70f mem 0xefffd000-0xefffdfff irq 23 at device 14.0 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] atapci2: <nVidia nForce MCP55 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xf200-0xf20f mem 0xefffc000-0xefffcfff irq 20 at device 14.1 on pci0 atapci2: [ITHREAD] ata4: <ATA channel 0> on atapci2 ata4: [ITHREAD] ata5: <ATA channel 1> on atapci2 ata5: [ITHREAD] atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xf100-0xf107,0xf000-0xf003,0xef00-0xef07,0xee00-0xee03,0xed00-0xed0f mem 0xefffb000-0xefffbfff irq 21 at device 14.2 on pci0 atapci3: [ITHREAD] ata6: <ATA channel 0> on atapci3 ata6: [ITHREAD] ata7: <ATA channel 1> on atapci3 ata7: [ITHREAD] pcib4: <ACPI PCI-PCI bridge> at device 15.0 on pci0 pci4: <ACPI PCI bus> on pcib4 fwohci0: <VIA Fire II (VT6306)> port 0xcf00-0xcf7f mem 0xefbff000-0xefbff7ff irq 19 at device 11.0 on pci4 fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:01:1e:3d:ab fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:d8:1e:3d:ab fwe0: Ethernet address: 02:11:d8:1e:3d:ab fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:11:d8:00:01:1e:3d:ab _at_ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x7d920000 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode pcm0: <NVidia MCP55 High Definition Audio Controller> mem 0xefff0000-0xefff3fff irq 22 at device 15.1 on pci0 pcm0: [ITHREAD] nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xec00-0xec07 mem 0xefffa000-0xefffafff,0xefff9000-0xefff90ff,0xefff8000-0xefff800f irq 23 at device 17.0 on pci0 miibus0: <MII bus> on nfe0 e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto nfe0: Ethernet address: 00:1a:92:46:e0:44 nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xeb00-0xeb07 mem 0xefff7000-0xefff7fff,0xefff6000-0xefff60ff,0xefff5000-0xefff500f irq 20 at device 18.0 on pci0 miibus1: <MII bus> on nfe1 e1000phy1: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus1 e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto nfe1: Ethernet address: 00:1a:92:46:ed:f7 nfe1: [FILTER] nfe1: [FILTER] nfe1: [FILTER] nfe1: [FILTER] nfe1: [FILTER] nfe1: [FILTER] nfe1: [FILTER] nfe1: [FILTER] pcib5: <ACPI PCI-PCI bridge> at device 19.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 20.0 on pci0 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 21.0 on pci0 pci7: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 22.0 on pci0 pci8: <ACPI PCI bus> on pcib8 atapci4: <SiI 3132 SATA300 controller> port 0x6f00-0x6f7f mem 0xef2ff000-0xef2ff07f,0xef2f8000-0xef2fbfff irq 16 at device 0.0 on pci8 atapci4: [ITHREAD] ata8: <ATA channel 0> on atapci4 ata8: [ITHREAD] ata9: <ATA channel 1> on atapci4 ata9: [ITHREAD] pcib9: <ACPI PCI-PCI bridge> at device 23.0 on pci0 pci9: <ACPI PCI bus> on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 24.0 on pci0 pci10: <ACPI PCI bus> on pcib10 acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 uhub2: <Logitech Logitech G15 Keyboard, class 9/0, rev 1.10/1.03, addr 2> on uhub0 uhub2: 4 ports with 2 removable, bus powered ukbd0: <Logitech Logitech Gaming Keyboard, class 0/0, rev 2.00/1.70, addr 3> on uhub2 kbd2 at ukbd0 uhid0: <Logitech Logitech Gaming Keyboard, class 0/0, rev 2.00/1.70, addr 3> on uhub2 uhid1: <G15 Keyboard G15 Keyboard, class 0/0, rev 2.00/1.03, addr 4> on uhub2 ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/21.00, addr 5> on uhub0 ums0: 8 buttons and Z dir. Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) acd0: DVDR <SONY DVD RW AW-Q170A/1.70> at ata0-master UDMA66 acd1: CDRW <SONY CD-RW CRX230EE/2YS8> at ata0-slave UDMA33 ad4: 152627MB <WDC WD1600JS-00NCB1 10.02E02> at ata2-master SATA300 ad6: 152627MB <WDC WD1600JS-00NCB1 10.02E02> at ata3-master SATA300 ad8: 152627MB <WDC WD1600JS-00NCB1 10.02E02> at ata4-master SATA300 pcm0: <HDA Codec: Analog Devices AD1988B> pcm0: <HDA Driver Revision: 20070710_0047> SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:/dev/ad8s1a TCP: [65.87.18.131]:443 to [192.168.0.46]:57437 tcpflags 0x18<PUSH,ACK>; tcp_do_segment: FIN_WAIT_1: Received data after socket was closed, sending RST and removing tcpcb TCP: [65.87.18.131]:443 to [192.168.0.46]:51816 tcpflags 0x18<PUSH,ACK>; tcp_do_segment: FIN_WAIT_1: Received data after socket was closed, sending RST and removing tcpcb TCP: [64.233.167.147]:80 to [192.168.0.46]:64551 tcpflags 0x18<PUSH,ACK>; tcp_do_segment: FIN_WAIT_1: Received data after socket was closed, sending RST and removing tcpcb TCP: [64.233.167.147]:80 to [192.168.0.46]:54477 tcpflags 0x18<PUSH,ACK>; tcp_do_segment: FIN_WAIT_1: Received data after socket was closed, sending RST and removing tcpcb TCP: [64.233.167.147]:80 to [192.168.0.46]:58252 tcpflags 0x18<PUSH,ACK>; tcp_do_segment: FIN_WAIT_1: Received data after socket was closed, sending RST and removing tcpcb TCP: [65.87.24.34]:80 to [192.168.0.46]:51475 tcpflags 0x18<PUSH,ACK>; tcp_do_segment: FIN_WAIT_1: Received data after socket was closed, sending RST and removing tcpcb TCP: [65.87.24.34]:80 to [192.168.0.46]:57558 tcpflags 0x10<ACK>; tcp_do_segment: FIN_WAIT_1: Received data after socket was closed, sending RST and removing tcpcb TCP: [64.233.167.147]:80 to [192.168.0.46]:65081 tcpflags 0x18<PUSH,ACK>; tcp_do_segment: FIN_WAIT_1: Received data after socket was closed, sending RST and removing tcpcb TCP: [212.241.194.1]:80 to [192.168.0.46]:49845 tcpflags 0x18<PUSH,ACK>; tcp_do_segment: FIN_WAIT_2: Received data after socket was closed, sending RST and removing tcpcb TCP: [144.171.20.25]:80 to [192.168.0.46]:57822 tcpflags 0x18<PUSH,ACK>; tcp_do_segment: FIN_WAIT_1: Received data after socket was closed, sending RST and removing tcpcb TCP: [205.130.197.120]:80 to [192.168.0.46]:64545 tcpflags 0x19<FIN,PUSH,ACK>; tcp_do_segment: FIN_WAIT_2: Received data after socket was closed, sending RST and removing tcpcb TCP: [64.233.167.104]:80 to [192.168.0.46]:58216 tcpflags 0x18<PUSH,ACK>; tcp_do_segment: FIN_WAIT_1: Received data after socket was closed, sending RST and removing tcpcb TCP: [66.150.96.119]:80 to [192.168.0.46]:61711 tcpflags 0x18<PUSH,ACK>; tcp_do_segment: FIN_WAIT_2: Received data after socket was closed, sending RST and removing tcpcb TCP: [8.15.32.24]:80 to [192.168.0.46]:60810 tcpflags 0x10<ACK>; tcp_do_segment: FIN_WAIT_1: Received data after socket was closed, sending RST and removing tcpcbReceived on Tue Sep 18 2007 - 01:23:04 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:17 UTC