Re: USB keyboard status indicators not working

From: Thomas D. Dean <tomdean_at_speakeasy.org>
Date: Mon, 17 Sep 2007 20:55:05 -0700 (PDT)
I see a similar problem in -stable and -current on an HP Pavillion
dv6446 notebook.  I have a Logitech wireless USB receiver with a
keyboard and mouse.  The keyboard led's do not function, for either
the local or wireless keyboard when the Logitech receiver is
connnected.

dmesg below.

tomdean

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #2: Sat Sep 15 11:31:41 PDT 2007
    root_at_dv6000.tddhome:/scratch/obj/usr/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM) Duo CPU      T2450  _at_ 2.00GHz (1995.61-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6ec  Stepping = 12
  Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xc189<SSE3,MON,EST,TM2,<b14>,<b15>>
  AMD Features=0x100000<NX>
  Cores per package: 2
real memory  = 2137456640 (2038 MB)
avail memory = 2086514688 (1989 MB)
ACPI APIC Table: <HP     30BB    >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 2000
acpi0: Power Button (fixed)
acpi0: reservation of fed00000, 400 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82945GM (945GM GMCH) SVGA controller> port 0x1800-0x1807 mem 0xd8100000-0xd817ffff,0xc0000000-0xcfffffff,0xd8200000-0xd823ffff irq 16 at device 2.0 on pci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
pci0: <display> at device 2.1 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pci2: <network> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xd8444000-0xd84443ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ugen0: Sonix Technology Co., Ltd. USB 2.0 Camera, rev 2.00/2.10, addr 2
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib3
fwohci0: <1394 Open Host Controller Interface> mem 0xd8001000-0xd80017ff irq 16 at device 5.0 on pci5
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:24:1b:00:bb:30:23:00
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:24:1b:30:23:00
fwe0: Ethernet address: 02:24:1b:30:23:00
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci5: <base peripheral> at device 5.1 (no driver attached)
pci5: <base peripheral> at device 5.2 (no driver attached)
pci5: <base peripheral> at device 5.3 (no driver attached)
pci5: <base peripheral> at device 5.4 (no driver attached)
fxp0: <Intel Pro/100 VE Network Connection> port 0x4000-0x403f mem 0xd8000000-0xd8000fff irq 20 at device 8.0 on pci5
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:1b:24:49:da:97
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH7M SATA300 controller> port 0x18d0-0x18d7,0x18c4-0x18c7,0x18c8-0x18cf,0x18c0-0x18c3,0x18b0-0x18bf mem 0xd8444400-0xd84447ff irq 19 at device 31.2 on pci0
atapci1: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
ata5: <ATA channel 3> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xce800-0xcffff,0xdf000-0xdf7ff,0xe0000-0xe17ff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: Logitech USB Receiver, rev 1.10/38.10, addr 2, iclass 3/1
kbd2 at ukbd0
ums0: Logitech USB Receiver, rev 1.10/38.10, addr 2, iclass 3/1
ums0: 8 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <MATSHITADVD-RAM UJ-851S/1.50> at ata0-master PIO4
ad4: 152627MB <TOSHIBA MK1637GSX DL032C> at ata2-master SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a
fxp0: link state changed to UP
drmsub0: <Intel i945GM>: (child of agp_i810.c) on agp0
info: [drm] AGP at 0xd8100000 0MB
info: [drm] Initialized i915 1.5.0 20060119
fxp0: link state changed to DOWN
fxp0: link state changed to UP
fxp0: link state changed to DOWN
fxp0: link state changed to UP
Received on Tue Sep 18 2007 - 01:55:21 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:17 UTC