Re: Only 100baseTX with bge BCM5722

Hey:

I just debugged this problem on another BCM chipset.  Please instead
of setting at particular speed:

ifconfig bgeX down
ifconfig bgeX media autoselect up

See if it auto-renegotiates correctly.

BCM phys are notorious for this issue.  Also, do you have IPMI active?

Thanks!

-aps

On Tue, Apr 1, 2008 at 3:44 PM, Josep Pujadas i Jubany
<josep_at_bellera.cat> wrote:
> On Tue, 1 Apr 2008 10:18:55 -0700, David Christensen wrote
>
> > > Hello!
>  > >
>  > > Scenario:
>  > >
>  > > * Machine: HP Proliant ML110 G5
>  > > * Integrated NIC: Broadcom NetXtreme BCM5722 Gigabit Ethernet PCIe
>  > > * FreeBSD 7.0
>  > > * Kernel recompiled patching bge driver as explained at
>  > > http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/119779
>  > >
>  > > The card works only at 100baseTX:
>  > >
>  > > media: Ethernet autoselect (100baseTX <full-duplex>)
>  > > status: active
>  > >
>  > > If I try:
>  > >
>  > > # ifconfig bge0 media 1000baseTX mediaopt full-duplex
>  > >
>  > > I obtain:
>  > >
>  > > media: Ethernet 1000baseTX <full-duplex>
>  > > status: no carrier
>  > >
>  > > Of course, the card is connected to a Gigabit switch, as other FreeBSD
>  > > machines that we have.
>  > >
>  > > The problem seems similar to
>  > > http://lists.freebsd.org/pipermail/freebsd-
>  > > current/2008-April/084606.html
>  > >
>  > > Any idea?
>  >
>  > What's the dmesg output?  Is it using ukphy or brgphy?
>  >
>  > Dave
>  >
>  > _______________________________________________
>
>  Dave,
>
>  Partial dmesg, concerning the NIC:
>
>  pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
>  pci14: <ACPI PCI bus> on pcib4
>  bge0: <HP NC105i PCIe Gigabit Server Adapter, ASIC rev. 0xa200> mem
>  0xed000000-0xed00ffff irq 17 at device 0.0 on pci14
>  miibus0: <MII bus> on bge0
>  ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
>  ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
>  1000baseT-FDX, auto
>  bge0: Ethernet address: XXXXXXXXXXXXXXXXXXXXX
>  bge0: [ITHREAD]
>
>  bge0: link state changed to UP
>
>  Must I try 1000baseT-FDX instead than 1000baseTX in my ifconfig line?
>
>  Regards,
>
>  Josep Pujadas
>
>
>
>  _______________________________________________
>  freebsd-current_at_freebsd.org mailing list
>  http://lists.freebsd.org/mailman/listinfo/freebsd-current
>  To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"
>



-- 
"What lies behind us and what lies in front of us is of little concern
to what lies within us." -Ralph Waldo Emerson