Re: Packet corruption in re0

From: Pyun YongHyeon <pyunyh_at_gmail.com>
Date: Fri, 22 Feb 2008 13:27:00 +0900
On Thu, Feb 21, 2008 at 01:18:18PM +0200, Ian FREISLICH wrote:
 > Pyun YongHyeon wrote:
 > > On Thu, Feb 21, 2008 at 02:47:43PM +1000, Robert Backhaus wrote:
 > >  > On Thu, Feb 21, 2008 at 1:50 PM, Pyun YongHyeon <pyunyh_at_gmail.com> wrote:
 > >  > > On Thu, Feb 21, 2008 at 11:03:02AM +1000, Robert Backhaus wrote:
 > >  > >   > I am experiencing roughly 15% packet corruption on the re interface 
 > on
 > >  > >   > my freebsd 7/amd64  box.
 > >  > >   >
 > >  > >   > FreeBSD gw.flexi.robbak.com 7.0-PRERELEASE FreeBSD 7.0-PRERELEASE #8
 > :
 > >  > >   > Tue Feb  5 09:49:55 EST 2008
 > >  > >   > root_at_gw.flexi.robbak.com:/usr/obj/usr/src/sys/GW  amd64
 > >  > >   >
 > >  > >   > Just to make troubleshooting difficult, this problem only shows up
 > >  > >   > after the system has been up for roughly 36 hours, depending on the
 > >  > >   > amount of traffic.
 > >  > >   >
 > >  > >
 > >  > >  I didn't take a look attached tcpdump files but I guess the
 > >  > >  instability issue was fixed in HEAD. It's not yet MFCed but
 > >  > >  I'll handle it in a week.
 > >  > >
 > >  > >  Would you try re(4) in HEAD?
 > >  > >
 > >  > 
 > >  > OK, I'll do that. What is the best way to do that? csupping to "." seems a
 > >  > bit drastic, and I don't do much with cvs proper. I take it that I should 
 > use
 > >  > anon-cvs to grab the directory, but I don't quite know how.
 > >  > 
 > > 
 > > Copy sys/dev/re/if_re.c, sys/pci/if_rlreg.h in HEAD to your box.
 > > Due to lack of m_defrag(9) in 7-PRERELEASE/RC, you also have to add
 > > that function to if_re.c(Copy m_defrag() in sys/kern/uipc_mbuf.c on
 > > HEAD/RELENG_7 to if_re.c). That would make it build on your box.
 > 
 > This doesn't solve the problem that I'm seeing on re(4) interfaces.
 > It basically shows up as quagga establishing OSPF neighours as
 > "Exchange/DR" when VLAN hardware tagging is enabled.  I'm running
 > OSPF over 802.1Q vlans.  Neighbours are correctly negotiated once
 > VLAN hardware tagging is disabled on the interface.
 > 
 > I'll do more debugging.
 > 

Hmm. That sounds like different issue to me. I guess I din't change
any semantics in VLAN H/W tagging. Do you still the same VLAN H/W
tagging related issues on RELENG_7?

To narrow down the issue it would be even better to know which parts
of H/W assistance was broken. For example,
 - Disable checksum offload for VLAN interface first and check
   whether quagga works.
 - Disable checksum offload for parent interface and check again.
If you can post tcpdump output for broken conntection it may help a
lot to diagnose the issue.

-- 
Regards,
Pyun YongHyeon
Received on Fri Feb 22 2008 - 03:27:10 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:27 UTC