Pyun YongHyeon wrote: > On Thu, Feb 21, 2008 at 02:47:43PM +1000, Robert Backhaus wrote: > > On Thu, Feb 21, 2008 at 1:50 PM, Pyun YongHyeon <pyunyh_at_gmail.com> wrote: > > > On Thu, Feb 21, 2008 at 11:03:02AM +1000, Robert Backhaus wrote: > > > > I am experiencing roughly 15% packet corruption on the re interface on > > > > my freebsd 7/amd64 box. > > > > > > > > FreeBSD gw.flexi.robbak.com 7.0-PRERELEASE FreeBSD 7.0-PRERELEASE #8 : > > > > Tue Feb 5 09:49:55 EST 2008 > > > > root_at_gw.flexi.robbak.com:/usr/obj/usr/src/sys/GW amd64 > > > > > > > > Just to make troubleshooting difficult, this problem only shows up > > > > after the system has been up for roughly 36 hours, depending on the > > > > amount of traffic. > > > > > > > > > > I didn't take a look attached tcpdump files but I guess the > > > instability issue was fixed in HEAD. It's not yet MFCed but > > > I'll handle it in a week. > > > > > > Would you try re(4) in HEAD? > > > > > > > OK, I'll do that. What is the best way to do that? csupping to "." seems a > > bit drastic, and I don't do much with cvs proper. I take it that I should use > > anon-cvs to grab the directory, but I don't quite know how. > > > > Copy sys/dev/re/if_re.c, sys/pci/if_rlreg.h in HEAD to your box. > Due to lack of m_defrag(9) in 7-PRERELEASE/RC, you also have to add > that function to if_re.c(Copy m_defrag() in sys/kern/uipc_mbuf.c on > HEAD/RELENG_7 to if_re.c). That would make it build on your box. This doesn't solve the problem that I'm seeing on re(4) interfaces. It basically shows up as quagga establishing OSPF neighours as "Exchange/DR" when VLAN hardware tagging is enabled. I'm running OSPF over 802.1Q vlans. Neighbours are correctly negotiated once VLAN hardware tagging is disabled on the interface. I'll do more debugging. Ian -- Ian FreislichReceived on Thu Feb 21 2008 - 10:19:13 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:27 UTC