Hi, i have problem with ati mobility radeon 9600 graphic card. With vesa driver works OK, but with ati or radeon driver, 3d acceletarion does not work (with Xorg 6.9 worked). I am now using Xorg xorg-server-1.4_3,1. xvinfo: X-Video Extension version 2.2 screen #0 Adaptor #0: "ATI Radeon Video Overlay" number of ports: 1 port base: 73 operations supported: PutImage supported visuals: depth 24, visualID 0x23 depth 24, visualID 0x24 depth 24, visualID 0x25 depth 24, visualID 0x26 depth 24, visualID 0x27 depth 24, visualID 0x28 depth 24, visualID 0x29 depth 24, visualID 0x2a depth 24, visualID 0x2b depth 24, visualID 0x2c depth 24, visualID 0x2d depth 24, visualID 0x2e depth 24, visualID 0x2f depth 24, visualID 0x30 depth 24, visualID 0x31 depth 24, visualID 0x32 number of attributes: 22 "XV_DEVICE_ID" (range 0 to -1) client gettable attribute (current value is 109) "XV_LOCATION_ID" (range 0 to -1) client gettable attribute (current value is 110) "XV_INSTANCE_ID" (range 0 to -1) client gettable attribute (current value is 111) "XV_DUMP_STATUS" (range 0 to 1) client settable attribute "XV_SET_DEFAULTS" (range 0 to 1) client settable attribute "XV_AUTOPAINT_COLORKEY" (range 0 to 1) client settable attribute client gettable attribute (current value is 1) "XV_COLORKEY" (range 0 to -1) client settable attribute client gettable attribute (current value is 30) "XV_DOUBLE_BUFFER" (range 0 to 1) client settable attribute client gettable attribute (current value is 1) "XV_OVERLAY_ALPHA" (range 0 to 255) client settable attribute client gettable attribute (current value is 255) "XV_GRAPHICS_ALPHA" (range 0 to 255) client settable attribute client gettable attribute (current value is 255) "XV_ALPHA_MODE" (range 0 to 1) client settable attribute client gettable attribute (current value is 0) "XV_BRIGHTNESS" (range -1000 to 1000) client settable attribute client gettable attribute (current value is 0) "XV_CONTRAST" (range -1000 to 1000) client settable attribute client gettable attribute (current value is 0) "XV_SATURATION" (range -1000 to 1000) client settable attribute client gettable attribute (current value is 0) "XV_COLOR" (range -1000 to 1000) client settable attribute client gettable attribute (current value is 0) "XV_HUE" (range -1000 to 1000) client settable attribute client gettable attribute (current value is 0) "XV_RED_INTENSITY" (range -1000 to 1000) client settable attribute client gettable attribute (current value is 0) "XV_GREEN_INTENSITY" (range -1000 to 1000) client settable attribute client gettable attribute (current value is 0) "XV_BLUE_INTENSITY" (range -1000 to 1000) client settable attribute client gettable attribute (current value is 0) "XV_CRTC" (range -1 to 1) client settable attribute client gettable attribute (current value is -1) "XV_GAMMA" (range 100 to 10000) client settable attribute client gettable attribute (current value is 1000) "XV_COLORSPACE" (range 0 to 1) client settable attribute client gettable attribute (current value is 0) maximum XvImage size: 2048 x 2048 Number of image formats: 8 id: 0x41424752 (RGBA) guid: 52474241-0000-0010-8000-00aa00389b71 bits per pixel: 32 number of planes: 1 type: RGB (packed) depth: 32 red, green, blue masks: 0xff0000, 0xff00, 0xff id: 0x0 guid: 52474200-0000-0010-8000-00aa00389b71 bits per pixel: 24 number of planes: 1 type: RGB (packed) depth: 24 red, green, blue masks: 0xff0000, 0xff00, 0xff id: 0x54424752 (RGBT) guid: 52474254-0000-0010-8000-00aa00389b71 bits per pixel: 16 number of planes: 1 type: RGB (packed) depth: 16 red, green, blue masks: 0x7c00, 0x3e0, 0x1f id: 0x32424752 (RGB2) guid: 52474200-0000-0010-8000-00aa00389b71 bits per pixel: 16 number of planes: 1 type: RGB (packed) depth: 16 red, green, blue masks: 0xf800, 0x7e0, 0x1f id: 0x32595559 (YUY2) guid: 59555932-0000-0010-8000-00aa00389b71 bits per pixel: 16 number of planes: 1 type: YUV (packed) id: 0x59565955 (UYVY) guid: 55595659-0000-0010-8000-00aa00389b71 bits per pixel: 16 number of planes: 1 type: YUV (packed) id: 0x32315659 (YV12) guid: 59563132-0000-0010-8000-00aa00389b71 bits per pixel: 12 number of planes: 3 type: YUV (planar) id: 0x30323449 (I420) guid: 49343230-0000-0010-8000-00aa00389b71 bits per pixel: 12 number of planes: 3 type: YUV (planar) dmesg: Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #8: Tue Jan 1 19:19:22 CET 2008 merlyn_at_Vallhala:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. module_register: module pci/ichss_pci already exists! Module pci/ichss_pci failed to register: 17 module_register: module cpu/ichss already exists! Module cpu/ichss failed to register: 17 module_register: module cpu/est already exists! Module cpu/est failed to register: 17 module_register: module cpu/p4tcc already exists! Module cpu/p4tcc failed to register: 17 module_register: module cpu/powernow already exists! Module cpu/powernow failed to register: 17 module_register: module cpu/smist already exists! Module cpu/smist failed to register: 17 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1.70GHz (598.06-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6 Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0x180<EST,TM2> real memory = 536281088 (511 MB) avail memory = 511008768 (487 MB) kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Jan 1 2008 19:19:00) acpi0: <PTLTD Wistron> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci_link3: BIOS IRQ 11 for 0.29.INTB is invalid pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82855 host to AGP bridge> on hostb0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xd8000000-0xdfffffff,0xd0100000-0xd010ffff irq 11 at device 0.0 on pci1 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 10 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xd0000000-0xd00003ff irq 10 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 6 ports with 6 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci_link3: BIOS IRQ 11 for 2.5.INTA is invalid pci2: <ACPI PCI bus> on pcib2 bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xd0200000-0xd0201fff irq 10 at device 5.0 on pci2 miibus0: <MII bus> on bfe0 bmtphy0: <BCM4401 10/100baseTX PHY> PHY 1 on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: using obsoleted if_watchdog interface bfe0: Ethernet address: 00:0a:e4:b6:20:82 bfe0: [ITHREAD] pci2: <network> at device 6.0 (no driver attached) cbb0: <RF5C476 PCI-CardBus Bridge> at device 9.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [ITHREAD] cbb1: <RF5C476 PCI-CardBus Bridge> irq 10 at device 9.1 on pci2 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [ITHREAD] fwohci0: <Ricoh R5C552> mem 0xd0203000-0xd02037ff irq 11 at device 9.2 on pci2 fwohci0: [FILTER] fwohci0: OHCI version 1.0 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 06:e4:0a:00:69:4f:10:03 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 06:e4:0a:4f:10:03 fwe0: Ethernet address: 06:e4:0a:4f:10:03 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 06:e4:0a:00:69:4f:10:03 _at_ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x12b0000 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xd0000c00-0xd0000dff,0xd0000800-0xd00008ff irq 10 at device 31.5 on pci0 pcm0: [ITHREAD] pcm0: <Cirrus Logic CS4299 AC97 Codec> pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd8000-0xdbfff,0xdc000-0xdffff pnpid ORM0000 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 598063975 Hz quality 800 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) IP Filter: v4.1.28 initialized. Default = block all, Logging = enabled hptrr: no controller detected. ad0: 57231MB <HTE726060M9AT00 MH4OA6AA> at ata0-master UDMA100 acd0: DVDR <QSI DVD+/-RW SDW-082/LX32> at ata1-master UDMA33 WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:/dev/ad0s1a free inode /home/424299 had 4 blocks free inode /home/424321 had 4 blocks free inode /home/424332 had 4 blocks free inode /home/424347 had 4 blocks free inode /home/424364 had 4 blocks free inode /home/424386 had 4 blocks GEOM_LABEL: Label for provider acd0t01 is iso9660/NOVE. drm0: <ATI Radeon RV350 Mobility 9600 M10 NP> on vgapci0 info: [drm] AGP at 0xe0000000 256MB info: [drm] Initialized radeon 1.25.0 20060524 pid 1284 (artsd), uid 1001: exited on signal 11 (core dumped) info: [drm] Setting GART location based on new memory map info: [drm] Loading R300 Microcode info: [drm] writeback test succeeded in 1 usecs drm0: [ITHREAD] info: [drm] Setting GART location based on new memory map info: [drm] Loading R300 Microcode info: [drm] writeback test succeeded in 1 usecs drm0: [ITHREAD] /etc/X11/xorg.conf: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/local/share/X11/rgb" ModulePath "/usr/local/lib/xorg/modules" FontPath "/usr/local/lib/X11/fonts/misc/" FontPath "/usr/local/lib/X11/fonts/TTF/" FontPath "/usr/local/lib/X11/fonts/OTF" FontPath "/usr/local/lib/X11/fonts/Type1/" FontPath "/usr/local/lib/X11/fonts/100dpi/" FontPath "/usr/local/lib/X11/fonts/75dpi/" EndSection Section "Module" Load "extmod" Load "record" Load "dbe" Load "glx" Load "GLcore" Load "xtrap" Load "dri" Load "freetype" Load "type1" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbLayout" "cz" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/sysmouse" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "DDCMode" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> Option "RenderAccel" "true" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ShowCache" # [<bool>] #Option "DynamicClocks" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> Option "DRI" "true" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] Identifier "Card0" Driver "ati" VendorName "ATI Technologies Inc" BoardName "RV350 [Mobility Radeon 9600 M10]" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Any ideas what with it? Thank, Milan BartosReceived on Fri Jan 04 2008 - 16:46:06 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:25 UTC