Hi folks, I just upgraded one of my amd64 boxes from HEAD as of around March to HEAD as of this morning CEST and my ndis(4) card no longer works although I modified rc.conf as suggested (added wlans_ndis0="wlan0" and changed ifconfig_ndis0 to ifconfig_wlan0). The card doesn't seem to associate, or, better said, the wlan0 interface doesn't seem to associate, because the ndis0 interface says it is associated: (output copied by hand) #ifconfig ndis0 ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290 ether 00:0c:41:xx:xx:xx media: IEEE 802.11 Wireless Ethernet autoselect mode 11g status: associated #ifconfig wlan0 wlan0: flags=8c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 00:0c:41:xx:xx:xx inet6 fe80::20:xxxx:xxxx:xxxx%wlan0 prefixlen 64 scopeid 0x8 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier ssid ambassador channel 1 (2412 Mhz 11g) country US authmode open privacy ON deftxkey 1 wepkey 1:104-bit txpower 0 bmiss 7 mcastrate 6 mgmtrate 6 scanvalid 60 protmode CTS bintval 0 My wireless lan is on channel 6, so I though there could be problems with scanning, but.. #ifconfig wlan0 channel 6 doesn't print any error message but the output of ifconfig wlan0 is the same, with channel 1. Any hints? Thanks in advance and best regards -- Matteo Riondato FreeBSD Committer (http://www.FreeBSD.org) FreeSBIE Developer (http://www.FreeSBIE.org) GUFI Staff Member (http://www.GUFI.org) ----- End forwarded message ----- -- Matteo Riondato FreeBSD Committer (http://www.FreeBSD.org) FreeSBIE Developer (http://www.FreeSBIE.org) GUFI Staff Member (http://www.GUFI.org)
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:32 UTC