On Jul 25, 2008, at 7:13 PM, Mike Tancsa wrote: > But if I remove the modem, it does appear and work just fine. > > >>> How can I force the PCI modem *not* to be uart0 so that the onboard >>> com ports show up? >> >> uart(4) deals with the fact that the console may not be associated >> with uart0, so the real problem is not having a uart driver for the >> serial port at 0x3f8. >> >>> uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on >>> isa0 >>> uart0: [FILTER] >>> uart0: console (9600,n,8,1) >>> uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0 >>> uart1: [FILTER] >> >> Odd.. Is the 3com configured to take over COM1 or something? > > Nope, there is nothing that can be configured on it from what I see. My best guess is that the hints are interfering. Try renumbering the hints. The number does not matter for the console. HTH, -- Marcel Moolenaar xcllnt_at_mac.comReceived on Sat Jul 26 2008 - 00:23:33 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:33 UTC