Norikatsu Shigemura wrote: > Hi, wpaul. > > I got USB2.0 GbE Ether Adaptor a.k.a. PLANEX GU-1000T, but I > can't use it by axe(4). So I tried to improve axe(4) driver, > but I couldn't improve it:-(. Would you please fix this driver? > > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xb0040000-0xb00403ff irq 23 at device 29.7 on pci0 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > usb1: EHCI version 1.0 > usb1: companion controller, 2 ports each: usb0 > usb1: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0 > usb1: USB revision 2.0 > uhub1: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1 > uhub1: 2 ports with 2 removable, self powered > axe0: <vendor 0x0b95 product 0x1780, class 255/255, rev 2.00/0.01, addr 2> on uhub1 > axe0: AX88178, bufsz 4096, boundary 512 > miibus0: <MII bus> on axe0 > ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX, 1000baseT, 1000baseT-FDX, auto > axe0: WARNING: using obsoleted if_watchdog interface > axe0: WARNING: using obsoleted IFF_NEEDSGIANT flag > axe0: Ethernet address: 00:90:cc:ef:b9:f6 > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > > ISSUE: > 1. after ether cable connected, axe(4) doesn't link up. > 2. axe0 doesn't link up by 'ifconfig axe0 up', too. > 3. so I couldn't communicate other machines. > 4. I didn't know that axe(4) requires GIANT lock:-(. > > HAPPY: > 1. MAC Address is correct. > 2. I could replace obsolete if_watchdog interface. > SEE ALSO: attached patches > > ------------------------------------------------------------------------ [bill doesn't deal with stuff any more so no point involving him] I just tried my Linksys USB1000 (AX88178) on HEAD and it worked as expected. There are a slew of LOR's related to the ifnet multicast code holding a mtx over driver work but other than that I got link after marking the interface up, was able to get a dhcp lease, and upstream tcp netperf was about what I'd expect. Not sure there's any point chasing usb issues right now; alfred is going to bring in new usb code and at that point he'll be dealing with regressions. SamReceived on Sun Jun 01 2008 - 20:18:52 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:31 UTC