Pyun YongHyeon wrote: > On Mon, Mar 03, 2008 at 10:10:25AM +0100, Milan Obuch wrote: > > On Monday 03 March 2008, Pyun YongHyeon wrote: > > > On Sat, Mar 01, 2008 at 11:53:41AM -0500, Mike Tancsa wrote: > > > > > > Sorry for late handling. I wanted to solve Milan Obuch's issue first > > > before committing vr(4). But it seems that it's not easy to fix > > > Milan's issue. :-( > > > > > > > Well, I see some progress there... Today I was able to do some tests again, > > and I was able to ping -f another box on the same network for some time. I > > tried then csup sources and I got hard hang, again, this time with following > > lines on console: > > > > vr0: PCI bus error -- resetting > > vr0: restarting > > > > Hmm, this is interesting. 6105M datasheet said nothing what can be > done for this case. I guess this kind of error can come from > improperly seated NICs or broken hardware. Would you re-seat the NIC > or change PCI slot and try again with attached patch? > > > And no ability to enter kdb, either. > > Just for record, I am getting following when kldload'ing if_vr: > > > > vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 0x9c00-0x9cff mem > > 0xfceff000-0xfceff0ff irq 18 at device 8.0 on pci3 > > vr0: Quirks: 0x6 > > vr0: Revision: 0x96 > > miibus1: <MII bus> on vr0 > > ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 > > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > > > (one out of four devices shown) > > > > > > At 07:30 PM 2/27/2008, Pyun YongHyeon wrote: > > > > >I never thought this kind of testing. It's good to hear vr(4) > > > > >recovers from the abrupt link change events. I guess this also > > > > >indicates the overhauled vr(4) can close lots of PR for vr(4). > > > > > > > > BTW, any chance of these fixes being backported to RELENG_7 and > > > > RELENG_6 ? Its not just media speed changes that causes the nic to > > > > > > I'm sure I'll MFC the change to RELENG_7 but not sure it could be > > > done on RELENG_6 due to lack of spare time. > > > > > > > In my eyes, if new vr works for others and no regression was found, it should > > go in. I did not encountered a regression - it did not work with old driver, > > it does not work (yet) with the new... but I hope we can get this one > > working, too... > > > > Yes, I really like to fix it too. > Hey.. unfortunately I have to chime in too.. (with a failure) Last night I was running a crusty RELENG_6 from about july of last year. I had some issues unrelated to this, so I decided to update the system to check if that resolved those issues (it did - RELENG_6 as of sometime last night). However, vr stopped working. As I remembered this thread, I booted to my old kernel, and downloaded the rewrite/patchset for 6 and tried it out. Unfortunately, It is failing: vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe800-0xe8ff mem 0xe3004000-0xe30040ff irq 10 at device 18.0 on pci0 vr0: Quirks: 0x0 vr0: Revision: 0x70 vr0: phy read timeout 31:1 vr0: MII without any phy! device_attach: vr0 attach returned 6 I'm attaching the complete dmesg, and the version of if_vr.c used.. (a couple of the smaller patches you suggested I hand applied to reduce the turnaround time). Any suggestions would be tested tonight. Thanks, Phil. Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.3-STABLE #10: Mon Mar 3 09:45:21 MST 2008 root_at_home.nixil.net:/usr/obj/usr/src/sys/home Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) XP 1700+ (1466.51-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0480800<SYSCALL,MP,MMX+,3DNow!+,3DNow!> real memory = 2147418112 (2047 MB) avail memory = 2088062976 (1991 MB) kbd1 at kbdmux0 hptrr: HPT RocketRAID controller driver v1.1 (Mar 3 2008 03:17:40) acpi0: <SOYO AWRDACPI> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x407f,0x4080-0x40ff,0x5000-0x500f on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 nvidia0: <GeForce FX 5500> mem 0xe0000000-0xe0ffffff,0xd0000000-0xdfffffff irq 10 at device 0.0 on pci1 nvidia0: [GIANT-LOCKED] bt0: <Buslogic Multi-Master SCSI Host Adapter> port 0xd000-0xd003 mem 0xe3000000-0xe3000fff irq 11 at device 10.0 on pci0 bt0: BT-958 FW Rev. 5.07B Ultra Wide SCSI Host Adapter, SCSI ID 7, 192 CCBs bt0: [GIANT-LOCKED] ohci0: <NEC uPD 9210 USB controller> mem 0xe3001000-0xe3001fff irq 5 at device 11.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0 usb0: <NEC uPD 9210 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <NEC uPD 9210 USB controller> mem 0xe3002000-0xe3002fff irq 10 at device 11.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0 usb1: <NEC uPD 9210 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xe3003000-0xe30030ff irq 11 at device 11.2 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 3 ports each: usb0 usb1 usb2: <NEC uPD 720100 USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 5 ports with 5 removable, self powered pcm0: <CMedia CMI8738> port 0xd400-0xd4ff irq 10 at device 14.0 on pci0 viapropm0: SMBus I/O base at 0x5000 viapropm0: SMBus I/O base at 0x5000 viapropm0: <VIA VT8233 Power Management Unit> port 0x5000-0x500f at device 17.0 on pci0 viapropm0: SMBus revision code 0x0 smbus0: <System Management Bus> on viapropm0 smb0: <SMBus generic I/O> on smbus0 isa0: <ISA bus> on viapropm0 atapci0: <VIA 8233 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd800-0xd80f at device 17.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 uhci0: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 5 at device 17.2 on pci0 uhci0: [GIANT-LOCKED] usb3: <VIA 83C572 USB controller> on uhci0 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 5 at device 17.3 on pci0 uhci1: [GIANT-LOCKED] usb4: <VIA 83C572 USB controller> on uhci1 usb4: USB revision 1.0 uhub4: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 5 at device 17.4 on pci0 uhci2: [GIANT-LOCKED] usb5: <VIA 83C572 USB controller> on uhci2 usb5: USB revision 1.0 uhub5: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub5: 2 ports with 2 removable, self powered vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe800-0xe8ff mem 0xe3004000-0xe30040ff irq 10 at device 18.0 on pci0 vr0: Quirks: 0x0 vr0: Revision: 0x70 vr0: phy read timeout 31:1 vr0: MII without any phy! device_attach: vr0 attach returned 6 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xd0000-0xd07ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 uaudio0: vendor 0x046d Camera, rev 2.00/1.00, addr 2 uaudio0: audio descriptors make no sense, error=4 device_attach: uaudio0 attach returned 6 Timecounter "TSC" frequency 1466510394 Hz quality 800 Timecounters tick every 1.000 msec hptrr: no controller detected. ad0: 476940MB <Maxtor 6H500R0 HA3D1DD0> at ata0-master UDMA100 ad1: 381554MB <Seagate ST3400620A 3.AAC> at ata0-slave UDMA100 acd0: DMA limited to UDMA33, device found non-ATA66 cable acd0: DVDR <DVD-RW IDE1008/VER 0159> at ata1-master UDMA33 acd1: CDRW <48X12X50 CD-RW 1.04 20021101/1.04> at ata1-slave PIO4 Waiting 5 seconds for SCSI devices to settle acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 cd1 at ata1 bus 0 target 1 lun 0 cd1: < 48X12X50 CD-RW 1.04> Removable CD-ROM SCSI-0 device cd1: 16.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present cd0 at ata1 bus 0 target 0 lun 0 cd0: <DVDRW IDE1008 0159> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed Trying to mount root from ufs:/dev/ad0s1aReceived on Mon Mar 03 2008 - 16:28:46 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:28 UTC